Bug#911443: linux-image-4.18.0-2-arm64: wlan0 no longer present
Package: src:linux
Version: 4.18.10-2
Severity: important
Dear Maintainer,
The wlan0 interface of the Raspberry Pi 3 Model B is no longer present.
Downgrading to linux-image-4.17.0-3-arm64 4.17.15-1 restores it.
Under 4.17 it is present here:
/sys/devices/platform/soc/3f300000.sdhci/mmc_host/mmc1/mmc1:0001/mmc1:0001:1
Under 4.18 there is no longer any mmc1:* under
/sys/devices/platform/soc/3f300000.sdhci/mmc_host/mmc1/
-- Package-specific info:
** Version:
Linux version 4.18.0-2-arm64 (debian-kernel@lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-29)) #1 SMP Debian 4.18.10-2 (2018-10-07)
** Command line:
bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 dma.dmachans=0x7f35 bcm2709.boardrev=0xa02082 bcm2709.serial=0xc3d8c1f2 bcm2709.uart_clock=48000000 smsc95xx.macaddr=xx:xx:xx:xx:xx:xx vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty0 console=ttyS1,115200 root=/dev/mmcblk0p2 rw elevator=deadline fsck.repair=yes net.ifnames=0 rootwait
** Not tainted
** Kernel log:
[ 5.578576] hctosys: unable to open rtc device (rtc0)
[ 5.596621] Freeing unused kernel memory: 4928K
[ 5.989258] usb_phy_generic phy: phy supply vcc not found, using dummy regulator
[ 6.008474] i2c-bcm2835 3f805000.i2c: Could not read clock-frequency property
[ 6.032557] sdhci: Secure Digital Host Controller Interface driver
[ 6.041336] sdhci: Copyright(c) Pierre Ossman
[ 6.051348] sdhci-pltfm: SDHCI platform and OF driver helper
[ 6.060731] usbcore: registered new interface driver usbfs
[ 6.062878] sdhci-iproc 3f300000.sdhci: allocated mmc-pwrseq
[ 6.068897] usbcore: registered new interface driver hub
[ 6.085153] usbcore: registered new device driver usb
[ 6.106560] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1)
[ 6.114535] mmc1: SDHCI controller on 3f300000.sdhci [3f300000.sdhci] using PIO
[ 6.151028] dwc2 3f980000.usb: 3f980000.usb supply vusb_d not found, using dummy regulator
[ 6.164524] dwc2 3f980000.usb: 3f980000.usb supply vusb_a not found, using dummy regulator
[ 6.228602] dwc2 3f980000.usb: dwc2_check_params: Invalid parameter lpm=1
[ 6.232285] mmc0: host does not support reading read-only switch, assuming write-enable
[ 6.238118] dwc2 3f980000.usb: dwc2_check_params: Invalid parameter lpm_clock_gating=1
[ 6.254860] mmc0: new high speed SDHC card at address aaaa
[ 6.264824] dwc2 3f980000.usb: dwc2_check_params: Invalid parameter besl=1
[ 6.264833] dwc2 3f980000.usb: dwc2_check_params: Invalid parameter hird_threshold_en=1
[ 6.274839] mmcblk0: mmc0:aaaa SL08G 7.40 GiB
[ 6.305103] dwc2 3f980000.usb: DWC OTG Controller
[ 6.305941] mmcblk0: p1 p2
[ 6.312508] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1
[ 6.327511] dwc2 3f980000.usb: irq 41, io mem 0x3f980000
[ 6.335689] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[ 6.349176] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.359177] usb usb1: Product: DWC OTG Controller
[ 6.366590] usb usb1: Manufacturer: Linux 4.18.0-2-arm64 dwc2_hsotg
[ 6.375647] usb usb1: SerialNumber: 3f980000.usb
[ 6.383868] hub 1-0:1.0: USB hub found
[ 6.390412] hub 1-0:1.0: 1 port detected
[ 6.790550] usb 1-1: new high-speed USB device number 2 using dwc2
[ 6.813969] random: fast init done
[ 6.843897] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 7.014766] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
[ 7.027991] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7.038588] hub 1-1:1.0: USB hub found
[ 7.044940] hub 1-1:1.0: 5 ports detected
[ 7.338492] usb 1-1.1: new high-speed USB device number 3 using dwc2
[ 7.446907] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
[ 7.460223] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7.662758] systemd[1]: System time before build time, advancing clock.
[ 7.801709] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 7.831681] systemd[1]: Detected architecture arm64.
[ 7.875595] systemd[1]: Set hostname to <upshot>.
[ 8.660509] random: systemd: uninitialized urandom read (16 bytes read)
[ 8.670602] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 8.694623] random: systemd: uninitialized urandom read (16 bytes read)
[ 8.704055] systemd[1]: Reached target Remote File Systems.
[ 8.726564] random: systemd: uninitialized urandom read (16 bytes read)
[ 8.739535] systemd[1]: Created slice system-arpwatch.slice.
[ 8.763459] systemd[1]: Listening on Journal Audit Socket.
[ 8.794268] systemd[1]: Listening on Syslog Socket.
[ 8.802248] random: crng init done
[ 8.808830] random: 2 urandom warning(s) missed due to ratelimiting
[ 8.832208] systemd[1]: Created slice system-getty.slice.
[ 8.854641] systemd[1]: Reached target Swap.
[ 9.259751] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 9.824049] systemd-journald[215]: Received request to flush runtime journal from PID 1
[ 10.276263] bcm2835-rng 3f104000.rng: hwrng registered
[ 10.286381] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[ 10.698614] smsc95xx: unknown parameter 'macaddr' ignored
[ 10.707134] smsc95xx v1.0.6
[ 10.780465] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, xx:xx:xx:xx:xx:xx
[ 10.799385] usbcore: registered new interface driver smsc95xx
[ 10.844225] vc4_hdmi 3f902000.hdmi: ASoC: Failed to create component debugfs directory
[ 10.863801] vc4_hdmi 3f902000.hdmi: vc4-hdmi-hifi <-> 3f902000.hdmi mapping ok
[ 10.873780] vc4_hdmi 3f902000.hdmi: ASoC: no DMI vendor name!
[ 10.886995] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4])
[ 10.899735] vc4-drm soc:gpu: bound 3f806000.vec (ops vc4_vec_ops [vc4])
[ 10.910176] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4])
[ 10.919786] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 10.930024] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 10.940154] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 10.974596] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4])
[ 10.983587] checking generic (3eb75000 85400) vs hw (0 ffffffffffffffff)
[ 10.983594] fb: switching to vc4drmfb from simple
[ 10.990722] Console: switching to colour dummy device 80x25
[ 10.998207] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0
[ 11.004998] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 11.011763] [drm] Driver supports precise vblank timestamp query.
[ 11.038715] Console: switching to colour frame buffer device 90x30
[ 11.069622] vc4-drm soc:gpu: fb0: frame buffer device
[ 11.443898] audit: type=1400 audit(1529665912.775:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mdnsd" pid=260 comm="apparmor_parser"
[ 11.462354] audit: type=1400 audit(1529665912.791:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/avahi-daemon" pid=261 comm="apparmor_parser"
[ 11.489902] audit: type=1400 audit(1529665912.795:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/apt-cacher-ng" pid=263 comm="apparmor_parser"
[ 11.531701] audit: type=1400 audit(1529665912.863:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="syslog-ng" pid=262 comm="apparmor_parser"
[ 11.569099] audit: type=1400 audit(1529665912.899:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/identd" pid=264 comm="apparmor_parser"
[ 11.597173] audit: type=1400 audit(1529665912.899:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="klogd" pid=267 comm="apparmor_parser"
[ 11.640189] audit: type=1400 audit(1529665912.971:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/smbd" pid=265 comm="apparmor_parser"
[ 11.670664] audit: type=1400 audit(1529665913.003:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/nscd" pid=268 comm="apparmor_parser"
[ 11.716215] audit: type=1400 audit(1529665913.047:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ping" pid=270 comm="apparmor_parser"
[ 11.759280] audit: type=1400 audit(1529665913.091:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/dnsmasq" pid=271 comm="apparmor_parser"
[ 13.126173] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 13.141374] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.760999] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 14.776410] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
[ 15.736603] tun: Universal TUN/TAP device driver, 1.6
** Model information
Device Tree model: Raspberry Pi 3 Model B Rev 1.2
** Loaded modules:
tun
ip6t_REJECT
nf_reject_ipv6
ip6table_filter
ip6_tables
ipt_REJECT
nf_reject_ipv4
xt_tcpudp
xt_comment
iptable_filter
nls_ascii
nls_cp437
vfat
fat
vc4
snd_soc_core
snd_pcm_dmaengine
snd_pcm
snd_timer
smsc95xx
snd
usbnet
soundcore
mii
cec
drm_kms_helper
drm
bcm2835_thermal
pwm_bcm2835
bcm2835_wdt
bcm2835_rng
rng_core
leds_gpio
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
fscrypto
ecb
aes_arm64
dwc2
udc_core
sdhci_iproc
sdhci_pltfm
usbcore
sdhci
usb_common
bcm2835
i2c_bcm2835
phy_generic
** Network interface configuration:
source-directory /etc/network/interfaces.d
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
inet 192.168.1.3/24 brd 192.168.1.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::ba27:ebff:fed8:c1f2/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 4067 40 0 0 0 0 0 0 4067 40 0 0 0 0 0 0
eth0: 166722 695 0 0 0 0 0 0 158268 582 0 0 0 0 0 0
*** Protocol statistics:
Ip:
Forwarding: 2
721 total packets received
0 forwarded
0 incoming packets discarded
719 incoming packets delivered
581 requests sent out
80 dropped because of missing route
4 reassemblies required
2 packets reassembled ok
Icmp:
1 ICMP messages received
0 input ICMP message failed
ICMP input histogram:
destination unreachable: 1
3 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 3
IcmpMsg:
InType3: 1
OutType3: 3
Tcp:
13 active connection openings
1 passive connection openings
3 failed connection attempts
0 connection resets received
3 connections established
547 segments received
423 segments sent out
0 segments retransmitted
0 bad segments received
5 resets sent
Udp:
168 packets received
3 packets to unknown port received
0 packet receive errors
172 packets sent
0 receive buffer errors
0 send buffer errors
UdpLite:
TcpExt:
4 TCP sockets finished time wait in fast timer
11 delayed acks sent
181 packet headers predicted
85 acknowledgments not containing data payload received
184 predicted acknowledgments
1 connections reset due to unexpected data
TCPRcvCoalesce: 11
TCPAutoCorking: 11
TCPOrigDataSent: 310
TCPDelivered: 320
IpExt:
InOctets: 170136
OutOctets: 145416
InNoECTPkts: 721
** PCI devices:
not available
** USB devices:
not available
-- System Information:
Debian Release: buster/sid
APT prefers testing
APT policy: (990, 'testing')
Architecture: arm64 (aarch64)
Foreign Architectures: armhf
Kernel: Linux 4.18.0-2-arm64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-4.18.0-2-arm64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.132
ii kmod 25-1
ii linux-base 4.5
Versions of packages linux-image-4.18.0-2-arm64 recommends:
ii apparmor 2.13-8
ii firmware-linux-free 3.4
ii irqbalance 1.3.0-0.1+b1
Versions of packages linux-image-4.18.0-2-arm64 suggests:
pn debian-kernel-handbook <none>
pn linux-doc-4.18 <none>
Versions of packages linux-image-4.18.0-2-arm64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
ii firmware-brcm80211 20180825+dfsg-1
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Reply to: