Your message dated Fri, 16 Mar 2018 21:01:56 +0000 with message-id <1521234116.2495.159.camel@decadent.org.uk> and subject line Re: Bug#893106: linux-image-4.9.0-6-amd64: system shutdown on battery supply with remaining 30% power has caused the Debian Bug report #893106, regarding linux-image-4.9.0-6-amd64: system shutdown on battery supply with remaining 30% power to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 893106: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=893106 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-4.9.0-6-amd64: system shutdown on battery supply with remaining 30% power
- From: alain <rpnpif@free.fr>
- Date: Fri, 16 Mar 2018 15:31:47 +0100
- Message-id: <[🔎] 152121070755.1927.1130316966724460243.reportbug@HP123987>
Package: src:linux Version: 4.9.82-1+deb9u3 Severity: important Dear Maintainer, When the battery energy amount achieved a little more than 30% of the maximum, the system poweroff immediately without messages. This behaviour is not permanent but frequent, about one time on three. Expected: The system should warn the user when the setted threshold is attain and poweroff about 10%. Note: Perhaps the read power or voltage of the battery is wrong on this Pavilion G6 HP portable. -- Package-specific info: ** Version: Linux version 4.9.0-6-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.82-1+deb9u3 (2018-03-02) ** Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-6-amd64 root=UUID=dd92305b-33d1-416d-a6c8-5739579366c8 ro quiet ** Not tainted ** Kernel log: [ 60.819506] hidraw: raw HID events driver (C) Jiri Kosina [ 60.865087] usbcore: registered new interface driver usbhid [ 60.865092] usbhid: USB HID core driver [ 60.976921] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:10.0/usb4/4-2/4-2:1.0/0003:2188:0AE1.0001/input/input16 [ 60.977385] hid-generic 0003:2188:0AE1.0001: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE ] on usb-0000:00:10.0-2/input0 [ 214.263701] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0). [ 214.263711] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known. [ 214.399314] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0). [ 214.399320] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known. [ 214.741654] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0). [ 214.741664] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known. [ 214.850974] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0). [ 214.850980] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known. [ 214.961622] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0). [ 214.961632] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known. [ 215.039730] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0). [ 215.039736] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known. [ 2420.754137] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0). [ 2420.754147] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known. [ 2421.837565] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0). [ 2421.837576] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known. [ 2421.944215] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0). [ 2421.944225] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known. [ 2445.154509] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0). [ 2445.154516] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known. [ 2445.248885] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0). [ 2445.248893] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known. ** Model information sys_vendor: Hewlett-Packard product_name: HP Pavilion g6 Notebook PC product_version: 0881120000305B10000620100 chassis_vendor: Hewlett-Packard chassis_version: Chassis Version bios_vendor: Insyde bios_version: F.28 board_vendor: Hewlett-Packard board_name: 188F board_version: 70.25 ** Loaded modules: hid_generic usbhid hid ctr ccm binfmt_misc nls_ascii nls_cp437 vfat fat uvcvideo videobuf2_vmalloc arc4 videobuf2_memops ath9k ath9k_common videobuf2_v4l2 ath9k_hw videobuf2_core videodev ath hp_wmi sparse_keymap media mac80211 joydev cfg80211 amdkfd snd_hda_codec_idt snd_hda_codec_hdmi snd_hda_codec_generic efi_pstore rfkill kvm irqbypass rtsx_pci_ms pcspkr radeon memstick k10temp evdev ip6t_REJECT snd_hda_intel shpchp serio_raw efivars snd_hda_codec nf_reject_ipv6 snd_hda_core nf_log_ipv6 snd_hwdep snd_pcm sg snd_timer wmi snd ac ttm drm_kms_helper xt_hl sp5100_tco ip6t_rt hp_accel lis3lv02d hp_wireless button battery soundcore video drm i2c_algo_bit input_polldev nf_conntrack_ipv6 nf_defrag_ipv6 acpi_cpufreq ipt_REJECT nf_reject_ipv4 nf_log_ipv4 nf_log_common xt_LOG xt_limit xt_tcpudp xt_addrtype nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack ip6table_filter ip6_tables nf_conntrack_netbios_ns nf_conntrack_broadcast nf_nat_ftp nf_nat nf_conntrack_ftp nf_conntrack loop parport_pc ppdev iptable_filter lp parport efivarfs ip_tables x_tables autofs4 ext4 crc16 jbd2 crc32c_generic fscrypto ecb glue_helper lrw gf128mul ablk_helper cryptd aes_x86_64 mbcache sr_mod cdrom sd_mod rtsx_pci_sdmmc mmc_core ohci_pci psmouse ahci libahci r8169 mii rtsx_pci mfd_core xhci_pci xhci_hcd i2c_piix4 ohci_hcd ehci_pci ehci_hcd libata usbcore scsi_mod usb_common thermal ** PCI devices: 00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Complex [1022:1510] Subsystem: Hewlett-Packard Company Family 14h Processor Root Complex [103c:188f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 00:01.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 7340] [1002:9808] (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Wrestler [Radeon HD 7340] [103c:188f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 33 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M] Region 1: I/O ports at 4000 [size=256] Region 2: Memory at f0400000 (32-bit, non-prefetchable) [size=256K] [virtual] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: radeon Kernel modules: radeon 00:01.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler HDMI Audio [1002:1314] Subsystem: Hewlett-Packard Company Wrestler HDMI Audio [103c:188f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 31 Region 0: Memory at f0444000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:10.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller [1022:7812] (rev 03) (prog-if 30 [XHCI]) Subsystem: Hewlett-Packard Company FCH USB XHCI Controller [103c:188f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f0448000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] [1022:7804] (prog-if 01 [AHCI 1.0]) Subsystem: Hewlett-Packard Company FCH SATA Controller [AHCI mode] [103c:188f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 30 Region 0: I/O ports at 4118 [size=8] Region 1: I/O ports at 4124 [size=4] Region 2: I/O ports at 4110 [size=8] Region 3: I/O ports at 4120 [size=4] Region 4: I/O ports at 4100 [size=16] Region 5: Memory at f044e000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller [1022:7807] (rev 11) (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company FCH USB OHCI Controller [103c:188f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f044d000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci Kernel modules: ohci_pci 00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller [1022:7808] (rev 11) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company FCH USB EHCI Controller [103c:188f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at f044c000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller [1022:7807] (rev 11) (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company FCH USB OHCI Controller [103c:188f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f044b000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci Kernel modules: ohci_pci 00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller [1022:7808] (rev 11) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company FCH USB EHCI Controller [103c:188f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at f044a000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller [1022:780b] (rev 14) Subsystem: Hewlett-Packard Company FCH SMBus Controller [103c:188f] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel modules: i2c_piix4, sp5100_tco 00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller [1022:780d] (rev 01) Subsystem: Hewlett-Packard Company FCH Azalia Controller [103c:188f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 32 Region 0: Memory at f0440000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge [1022:780e] (rev 11) Subsystem: Hewlett-Packard Company FCH LPC Bridge [103c:188f] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge [1022:780f] (rev 40) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:15.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 0) [1022:43a0] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 24 Bus: primary=00, secondary=02, subordinate=05, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: f0300000-f03fffff Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:15.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 1) [1022:43a1] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: f0200000-f02fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:15.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 2) [1022:43a2] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 Memory behind bridge: f0100000-f01fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 0 [1022:1700] (rev 43) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 1 [1022:1701] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 2 [1022:1702] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 3 [1022:1703] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: k10temp Kernel modules: k10temp 00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 4 [1022:1704] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 6 [1022:1718] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.6 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 5 [1022:1716] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.7 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 7 [1022:1719] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader [10ec:5229] (rev 01) Subsystem: Hewlett-Packard Company RTS5229 PCI Express Card Reader [103c:188f] Physical Slot: 0 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 25 Region 0: Memory at f0300000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: rtsx_pci Kernel modules: rtsx_pci 06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [10ec:8136] (rev 05) Subsystem: Hewlett-Packard Company RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [103c:188f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 26 Region 0: I/O ports at 2000 [size=256] Region 2: Memory at f0204000 (64-bit, prefetchable) [size=4K] Region 4: Memory at f0200000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 07:00.0 Network controller [0280]: Qualcomm Atheros AR9485 Wireless Network Adapter [168c:0032] (rev 01) Subsystem: Hewlett-Packard Company AR9485/HB125 802.11bgn 1×1 Wi-Fi Adapter [103c:1838] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f0100000 (64-bit, non-prefetchable) [size=512K] Expansion ROM at f0180000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: ath9k Kernel modules: ath9k ** USB devices: Bus 002 Device 002: ID 05c8:0348 Cheng Uei Precision Industry Co., Ltd (Foxlink) Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 004 Device 002: ID 2188:0ae1 Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 9.4 APT prefers stable APT policy: (500, 'stable') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.9.0-6-amd64 (SMP w/2 CPU cores) Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8), LANGUAGE=fr_FR.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages linux-image-4.9.0-6-amd64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.130 ii kmod 23-2 ii linux-base 4.5 Versions of packages linux-image-4.9.0-6-amd64 recommends: ii firmware-linux-free 3.4 ii irqbalance 1.1.0-2.3 Versions of packages linux-image-4.9.0-6-amd64 suggests: pn debian-kernel-handbook <none> ii grub-efi-amd64 2.02~beta3-5 pn linux-doc-4.9 <none> Versions of packages linux-image-4.9.0-6-amd64 is related to: ii firmware-amd-graphics 20161130-3 ii firmware-atheros 20161130-3 pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> ii firmware-linux-nonfree 20161130-3 ii firmware-misc-nonfree 20161130-3 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> ii firmware-realtek 20161130-3 pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
--- End Message ---
--- Begin Message ---
- To: 893106-done@bugs.debian.org
- Subject: Re: Bug#893106: linux-image-4.9.0-6-amd64: system shutdown on battery supply with remaining 30% power
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Fri, 16 Mar 2018 21:01:56 +0000
- Message-id: <1521234116.2495.159.camel@decadent.org.uk>
- In-reply-to: <[🔎] 152121070755.1927.1130316966724460243.reportbug@HP123987>
- References: <[🔎] 152121070755.1927.1130316966724460243.reportbug@HP123987>
On Fri, 2018-03-16 at 15:31 +0100, alain wrote: > Package: src:linux > Version: 4.9.82-1+deb9u3 > Severity: important > > Dear Maintainer, > > When the battery energy amount achieved a little more than 30% of the > maximum, the system poweroff immediately without messages. > > This behaviour is not permanent but frequent, about one time on > three. > > Expected: > The system should warn the user when the setted threshold is attain > and poweroff about 10%. > > Note: Perhaps the read power or voltage of the battery is wrong on > this Pavilion G6 HP portable. [...] This sort of sudden shutdown is normally triggered by the BIOS or power managenent controller. This can happen if the battery is worn out and its voltage drops rapidly, so that the reported charge level is no longer accurate. (Given that your laptop seems to be a 2011 model, I wouldn't expect the original battery to still work properly.) All of this is outside the control of the kernel. You will need to replace the battery. As a short-term workaround, you could reconfigure upower to warn and cleanly shut down at higher reported charge levels (above 30%). Ben. -- Ben Hutchings The program is absolutely right; therefore, the computer must be wrong.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---