Bug#741989: linux: 3.13.5: known regression: "xHCI xhci_drop_endpoint called with disabled ep"
Package: src:linux
Version: 3.13.5-1
Severity: normal
3.13.5 introduces a regression in the xhci code that causes mass
storage to not work correctly. In my case, the experience was that
first writes failed misteriously, the filesystem was corrupted
and then it could not be mounted anymore and I saw I/O errors.
The problem seems to be known upstream
https://lkml.org/lkml/2014/3/6/284
and fixed in 3.14-rc6. I hope the relevant commits (reverts)
will be backported to 3.13.7. If a stable release includes:
Revert "xhci 1.0: Limit arbitrarily-aligned scatter gather."
this most likely means that this bug is fixed.
Just reporting this in case some other Debian user has the
same problem, and to track this issue.
-- Package-specific info:
** Version:
Linux version 3.13-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-14) ) #1 SMP Debian 3.13.5-1 (2014-03-04)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.13-1-amd64 root=UUID=dd840eac-0283-45e9-8f04-ef33f516d29d ro quiet i915.i915_enable_fbc=0 i915.i915_enable_rc6=7 i915.lvds_downclock=1 "acpi_osi=!Windows 2012" init=/lib/systemd/systemd
** Tainted: WC (1536)
* Taint on warning.
* Module from drivers/staging has been loaded.
** Kernel log:
[241534.901961] usb 4-2: reset SuperSpeed USB device number 3 using xhci_hcd
[241534.917983] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb9ca140
[241534.917989] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb9ca100
[241534.918444] sd 7:0:0:0: [sdc] Unhandled error code
[241534.918448] sd 7:0:0:0: [sdc]
[241534.918449] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[241534.918451] sd 7:0:0:0: [sdc] CDB:
[241534.918452] Write(10): 2a 00 00 00 54 87 00 00 02 00
[241534.918459] end_request: I/O error, dev sdc, sector 21639
[241536.250911] usb 4-2: reset SuperSpeed USB device number 3 using xhci_hcd
[241536.267001] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb9ca140
[241536.267005] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb9ca100
[241536.386991] usb 4-2: reset SuperSpeed USB device number 3 using xhci_hcd
[241536.403130] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb9ca140
[241536.403135] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb9ca100
[241536.523120] usb 4-2: reset SuperSpeed USB device number 3 using xhci_hcd
[241536.539276] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb9ca140
[241536.539282] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb9ca100
[241536.659163] usb 4-2: reset SuperSpeed USB device number 3 using xhci_hcd
[241536.675305] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb9ca140
[241536.675310] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb9ca100
[241536.795291] usb 4-2: reset SuperSpeed USB device number 3 using xhci_hcd
[241536.811468] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb9ca140
[241536.811474] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb9ca100
[241536.931305] usb 4-2: reset SuperSpeed USB device number 3 using xhci_hcd
[241536.947646] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb9ca140
[241536.947652] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb9ca100
[241536.948179] sd 7:0:0:0: [sdc] Unhandled error code
[241536.948182] sd 7:0:0:0: [sdc]
[241536.948183] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[241536.948185] sd 7:0:0:0: [sdc] CDB:
[241536.948186] Write(10): 2a 00 00 00 32 1f 00 00 39 00
[241536.948193] end_request: I/O error, dev sdc, sector 12831
[241588.164995] usb 4-2: reset SuperSpeed USB device number 3 using xhci_hcd
[241588.180982] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb9ca140
[241588.180990] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb9ca100
[241593.184023] usb 4-2: Set SEL for device-initiated U2 failed.
[241593.304462] usb 4-2: reset SuperSpeed USB device number 3 using xhci_hcd
[241593.320681] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb9ca140
[241593.320686] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb9ca100
[241593.440717] usb 4-2: reset SuperSpeed USB device number 3 using xhci_hcd
[241593.456493] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb9ca140
[241593.456498] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb9ca100
[241593.576781] usb 4-2: reset SuperSpeed USB device number 3 using xhci_hcd
[241593.592639] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb9ca140
[241593.592644] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb9ca100
[241593.712888] usb 4-2: reset SuperSpeed USB device number 3 using xhci_hcd
[241593.728766] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb9ca140
[241593.728772] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb9ca100
[241593.848936] usb 4-2: reset SuperSpeed USB device number 3 using xhci_hcd
[241593.864643] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb9ca140
[241593.864648] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb9ca100
[241593.865027] sd 7:0:0:0: [sdc] Unhandled error code
[241593.865030] sd 7:0:0:0: [sdc]
[241593.865032] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[241593.865034] sd 7:0:0:0: [sdc] CDB:
[241593.865036] Write(10): 2a 00 00 00 32 57 00 00 45 00
[241593.865041] end_request: I/O error, dev sdc, sector 12887
[241593.865047] quiet_error: 118 callbacks suppressed
[241593.865049] Buffer I/O error on device sdc, logical block 12887
[241593.865050] lost page write due to I/O error on sdc
[241593.865059] Buffer I/O error on device sdc, logical block 12888
[241593.865060] lost page write due to I/O error on sdc
[241593.865062] Buffer I/O error on device sdc, logical block 12889
[241593.865063] lost page write due to I/O error on sdc
[241593.865064] Buffer I/O error on device sdc, logical block 12890
[241593.865065] lost page write due to I/O error on sdc
[241593.865067] Buffer I/O error on device sdc, logical block 12891
[241593.865068] lost page write due to I/O error on sdc
[241593.865070] Buffer I/O error on device sdc, logical block 12892
[241593.865071] lost page write due to I/O error on sdc
[241593.865072] Buffer I/O error on device sdc, logical block 12893
[241593.865073] lost page write due to I/O error on sdc
[241593.865075] Buffer I/O error on device sdc, logical block 12894
[241593.865075] lost page write due to I/O error on sdc
[241593.865077] Buffer I/O error on device sdc, logical block 12895
[241593.865078] lost page write due to I/O error on sdc
[241593.865080] Buffer I/O error on device sdc, logical block 12896
[241593.865081] lost page write due to I/O error on sdc
[241593.870081] FAT-fs (sdc): error, fat_get_cluster: invalid cluster chain (i_pos 524341)
[241593.870085] FAT-fs (sdc): Filesystem has been set read-only
[241593.870660] FAT-fs (sdc): error, fat_get_cluster: invalid cluster chain (i_pos 524341)
[241632.053857] usb 4-2: USB disconnect, device number 3
[241636.068315] usb 1-1.2: new high-speed USB device number 15 using ehci-pci
[241636.163216] usb 1-1.2: New USB device found, idVendor=8564, idProduct=1000
[241636.163220] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[241636.163222] usb 1-1.2: Product: Mass Storage Device
[241636.163224] usb 1-1.2: Manufacturer: JetFlash
[241636.163226] usb 1-1.2: SerialNumber: 4208253730
[241636.163685] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[241636.164267] scsi8 : usb-storage 1-1.2:1.0
[241637.166097] scsi 8:0:0:0: Direct-Access JetFlash Transcend 32GB 1.00 PQ: 0 ANSI: 6
[241637.166386] sd 8:0:0:0: Attached scsi generic sg2 type 0
[241637.167500] sd 8:0:0:0: [sdc] 61734912 512-byte logical blocks: (31.6 GB/29.4 GiB)
[241637.168210] sd 8:0:0:0: [sdc] Write Protect is off
[241637.168213] sd 8:0:0:0: [sdc] Mode Sense: 23 00 00 00
[241637.168962] sd 8:0:0:0: [sdc] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[241637.175398] sdc:
[241637.178637] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[241637.385253] FAT-fs (sdc): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
** Model information
sys_vendor: LENOVO
product_name: 2325CN3
product_version: ThinkPad X230
chassis_vendor: LENOVO
chassis_version: Not Available
bios_vendor: LENOVO
bios_version: G2ET94WW (2.54 )
board_vendor: LENOVO
board_name: 2325CN3
board_version: Not Defined
** Loaded modules:
usb_storage
aufs(C)
loop
ctr
ccm
ecb
rfcomm
bnep
cpufreq_stats
cpufreq_userspace
cpufreq_powersave
cpufreq_conservative
uinput
binfmt_misc
snd_hda_codec_hdmi
snd_hda_codec_realtek
iTCO_wdt
iTCO_vendor_support
joydev
x86_pkg_temp_thermal
intel_powerclamp
nls_utf8
nls_cp437
vfat
fat
intel_rapl
coretemp
kvm_intel
kvm
crct10dif_pclmul
crc32_pclmul
efi_pstore
crc32c_intel
ghash_clmulni_intel
arc4
aesni_intel
aes_x86_64
lrw
gf128mul
glue_helper
ablk_helper
cryptd
iwldvm
snd_hda_intel
mac80211
snd_hda_codec
psmouse
snd_hwdep
pcspkr
serio_raw
thinkpad_acpi
snd_pcm
evdev
nvram
snd_page_alloc
snd_seq
snd_seq_device
iwlwifi
uvcvideo
videobuf2_vmalloc
efivars
videobuf2_memops
videobuf2_core
snd_timer
btusb
videodev
cfg80211
media
bluetooth
lpc_ich
mfd_core
i2c_i801
wmi
snd
ac
soundcore
battery
tpm_tis
rfkill
tpm
i915
video
drm_kms_helper
drm
i2c_algo_bit
i2c_core
mei_me
mei
processor
button
fuse
ecryptfs
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
sg
sd_mod
crc_t10dif
crct10dif_common
ehci_pci
ehci_hcd
xhci_hcd
ahci
libahci
libata
scsi_mod
sdhci_pci
sdhci
mmc_core
thermal
thermal_sys
e1000e
ptp
usbcore
pps_core
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09)
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 4000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at f1520000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 40
Region 0: Memory at f1535000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection [8086:1502] (rev 04)
Subsystem: Lenovo Device [17aa:21f3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f1500000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f153b000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 4080 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f153a000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f1530000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f0d00000-f14fffff
Prefetchable memory behind bridge: 00000000f0400000-00000000f0bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: f0c00000-f0cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f1539000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation QM77 Express Chipset LPC Controller [8086:1e55] (rev 04)
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 41
Region 0: I/O ports at 40a8 [size=8]
Region 1: I/O ports at 40b4 [size=4]
Region 2: I/O ports at 40a0 [size=8]
Region 3: I/O ports at 40b0 [size=4]
Region 4: I/O ports at 4060 [size=32]
Region 5: Memory at f1538000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04)
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f1534000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at efa0 [size=32]
Kernel driver in use: i801_smbus
02:00.0 System peripheral [0880]: Ricoh Co Ltd MMC/SD Host Controller [1180:e822] (rev 07) (prog-if 01)
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0d00000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
03:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] [8086:0085] (rev 34)
Subsystem: Intel Corporation Centrino Advanced-N 6205 AGN [8086:1311]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f0c00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
** USB devices:
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 5986:02d2 Acer, Inc
Bus 001 Device 003: ID 0a5c:21e6 Broadcom Corp. BCM20702 Bluetooth 4.0 [ThinkPad]
Bus 001 Device 015: ID 8564:1000
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (980, 'unstable'), (500, 'unstable'), (100, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.13-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_DE.utf8, LC_CTYPE=de_DE.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.13-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.52
ii initramfs-tools [linux-initramfs-tool] 0.115
ii kmod 16-2
ii linux-base 3.5
ii module-init-tools 16-2
Versions of packages linux-image-3.13-1-amd64 recommends:
ii firmware-linux-free 3.3
Versions of packages linux-image-3.13-1-amd64 suggests:
pn debian-kernel-handbook <none>
pn grub-pc | extlinux | lilo <none>
pn linux-doc-3.13 <none>
Versions of packages linux-image-3.13-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.41
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.41
pn xen-hypervisor <none>
-- debconf information excluded
--
Julian Andres Klode - Debian Developer, Ubuntu Member
See http://wiki.debian.org/JulianAndresKlode and http://jak-linux.org/.
Please do not top-post if possible.
Reply to: