Bug#687540: marked as done (linux-image-2.6.32-5-amd64: tg3 brings up interface with 10Mbit at boot and only after restart of networking goes to 1000MbitOn boot the interface comes up with 10Mbit/s and lossy. Only when restarting the interface with)

To: Moritz Mühlenhoff <jmm@inutil.org>
Subject: Bug#687540: marked as done (linux-image-2.6.32-5-amd64: tg3 brings up interface with 10Mbit at boot and only after restart of networking goes to 1000MbitOn boot the interface comes up with 10Mbit/s and lossy. Only when restarting the interface with)
From: owner@bugs.debian.org (Debian Bug Tracking System)
Date: Tue, 02 Jul 2013 20:31:44 +0000
Message-id: <[🔎] handler.687540.D687540.137279689721578.ackdone@bugs.debian.org>
References: <20130702202807.GB4762@pisco.westfalen.local> <20120913155658.17845.21117.reportbug@spot.gn.apc.org>

Your message dated Tue, 2 Jul 2013 22:28:07 +0200
with message-id <20130702202807.GB4762@pisco.westfalen.local>
and subject line Closing
has caused the Debian Bug report #687540,
regarding linux-image-2.6.32-5-amd64: tg3 brings up interface with 10Mbit at boot and only after restart of networking goes to 1000MbitOn boot the interface comes up with 10Mbit/s and lossy. Only when restarting the interface with
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
687540: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=687540
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems

--- Begin Message ---

To: Debian Bug Tracking System <submit@bugs.debian.org>
Subject: linux-image-2.6.32-5-amd64: tg3 brings up interface with 10Mbit at boot and only after restart of networking goes to 1000Mbit On boot the interface comes up with 10Mbit/s and lossy. Only when restarting the interface with
From: Michael Moritz <systems+debian@gn.apc.org>
Date: Thu, 13 Sep 2012 16:56:58 +0100
Message-id: <20120913155658.17845.21117.reportbug@spot.gn.apc.org>

Package: linux-2.6
Version: 2.6.32-45
Severity: normal

/etc/init.d/networking restart 

does it come up as 1Gbit/s

Regards,

Michael


-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-45) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun May 6 04:00:17 UTC 2012

** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/md2 ro console=tty0 console=ttyS0,115200n8 vga=normal com1=115200,8n1

** Not tainted

** Kernel log:
[    4.084621] PM: Checking hibernation image.
[    4.097086] PM: Error -22 checking image file
[    4.097089] PM: Resume from disk failed.
[    4.097163] usb 2-1: configuration #1 chosen from 1 choice
[    4.113162] REISERFS (device md2): found reiserfs format "3.6" with standard journal
[    4.115164] usbcore: registered new interface driver hiddev
[    4.128291] REISERFS (device md2): using ordered data mode
[    4.129091] input: ServerEngines SE USB Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input1
[    4.129140] generic-usb 0003:0000:0000.0001: input,hidraw0: USB HID v1.11 Keyboard [ServerEngines SE USB Device] on usb-0000:00:1d.0-1/input0
[    4.133079] input: ServerEngines SE USB Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input2
[    4.133208] generic-usb 0003:0000:0000.0002: input,hidraw1: USB HID v1.11 Mouse [ServerEngines SE USB Device] on usb-0000:00:1d.0-1/input1
[    4.133239] usbcore: registered new interface driver usbhid
[    4.133293] usbhid: v2.6:USB HID core driver
[    4.217683] REISERFS (device md2): journal params: device md2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[    4.235049] REISERFS (device md2): checking transaction log (md2)
[    4.322286] REISERFS (device md2): Using r5 hash to sort names
[    5.574757] udev[437]: starting version 164
[    5.965531] processor LNXCPU:00: registered as cooling_device0
[    5.967142] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[    5.967149] ACPI: Power Button [PWRB]
[    5.985911] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    5.994335] ACPI: Power Button [PWRF]
[    5.999287] processor LNXCPU:01: registered as cooling_device1
[    6.006651] processor LNXCPU:02: registered as cooling_device2
[    6.014048] processor LNXCPU:03: registered as cooling_device3
[    6.021440] processor LNXCPU:04: registered as cooling_device4
[    6.028785] processor LNXCPU:05: registered as cooling_device5
[    6.036342] processor LNXCPU:06: registered as cooling_device6
[    6.043688] processor LNXCPU:07: registered as cooling_device7
[    6.299286] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    6.734755] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    6.751415] EDAC MC: Ver: 2.1.0 May  6 2012
[    6.757489] EDAC MC0: Giving out device to 'i5400_edac.c' 'I5400': DEV 0000:00:10.0
[    6.766201] EDAC PCI0: Giving out device to module 'i5400_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED)
[    6.779310] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.814094] intel_rng: FWH not detected
[    6.890395] Error: Driver 'pcspkr' is already registered, aborting...
[    7.345329] Adding 16000632k swap on /dev/md1.  Priority:-1 extents:1 across:16000632k 
[    7.722448] Uniform Multi-Platform E-IDE driver
[    7.796690] ide-cd driver 5.00
[    7.847942] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[    8.002664] ipmi message handler version 39.2
[    8.069831] IPMI System Interface driver.
[    8.074410] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
[    8.271033] ipmi: Found new BMC (man_id: 0x00000b,  prod_id: 0x2001, dev_id: 0x12)
[    8.279648] IPMI kcs interface initialized
[    8.284328] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[    8.295346] ipmi_si: duplicate interface
[    9.297574] kjournald starting.  Commit interval 5 seconds
[    9.333946] EXT3 FS on md0, internal journal
[    9.338887] EXT3-fs: mounted filesystem with ordered data mode.
[    9.346407] REISERFS (device dm-0): found reiserfs format "3.6" with standard journal
[    9.355306] REISERFS (device dm-0): using ordered data mode
[    9.361925] REISERFS (device dm-0): journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[    9.379487] REISERFS (device dm-0): checking transaction log (dm-0)
[    9.523034] REISERFS (device dm-0): Using r5 hash to sort names
[   11.228088]   alloc irq_desc for 79 on node -1
[   11.228092]   alloc kstat_irqs on node -1
[   11.228109] tg3 0000:03:00.0: irq 79 for MSI/MSI-X
[   11.277823] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.660806] tg3 0000:03:00.0: eth0: Link is up at 10 Mbps, half duplex
[   13.664101] tg3 0000:03:00.0: eth0: Flow control is off for TX and off for RX
[   13.677307] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   23.920008] eth0: no IPv6 routers present
[   38.375679] ip_tables: (C) 2000-2006 Netfilter Core Team
[   41.208431] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   41.215615] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[   41.224007] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[   41.232979] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[   42.057029] device eth0 entered promiscuous mode
[   64.665266] device eth0 left promiscuous mode
[  102.435439] warning: `proftpd' uses 32-bit capabilities (legacy support in use)
[  102.435443] warning: `proftpd' uses 32-bit capabilities (legacy support in use)
[  214.763454] tg3 0000:03:00.0: PME# enabled
[  215.249583] tg3 0000:03:00.0: irq 79 for MSI/MSI-X
[  215.298600] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  217.812149] tg3 0000:03:00.0: eth0: Link is up at 1000 Mbps, full duplex
[  217.819756] tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX
[  217.828924] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  227.924006] eth0: no IPv6 routers present
[  426.249066]   alloc irq_desc for 80 on node -1
[  426.249070]   alloc kstat_irqs on node -1
[  426.249087] tg3 0000:04:00.0: irq 80 for MSI/MSI-X
[  426.302214] ADDRCONF(NETDEV_UP): eth1: link is not ready
[  519.159261] tg3 0000:04:00.0: PME# enabled
[ 3805.220337] ipmi device interface
[ 5844.248764] TCP: Peer 94.192.159.219:54440/80 unexpectedly shrunk window 2343419551:2343425391 (repaired)
[ 5844.732762] TCP: Peer 94.192.159.219:54440/80 unexpectedly shrunk window 2343419551:2343425391 (repaired)
[ 6263.640554] usb 2-1: USB disconnect, address 2
[ 6268.384294] usb 2-1: new full speed USB device using uhci_hcd and address 3
[ 6268.560760] usb 2-1: New USB device found, idVendor=0000, idProduct=0000
[ 6268.568654] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6268.577006] usb 2-1: Product: SE USB Device
[ 6268.581975] usb 2-1: Manufacturer: ServerEngines
[ 6268.587400] usb 2-1: SerialNumber: 6005544094870A
[ 6268.593176] usb 2-1: configuration #1 chosen from 1 choice
[ 6268.620261] input: ServerEngines SE USB Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input6
[ 6268.632184] generic-usb 0003:0000:0000.0003: input,hidraw0: USB HID v1.11 Keyboard [ServerEngines SE USB Device] on usb-0000:00:1d.0-1/input0
[ 6268.654075] input: ServerEngines SE USB Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input7
[ 6268.666085] generic-usb 0003:0000:0000.0004: input,hidraw1: USB HID v1.11 Mouse [ServerEngines SE USB Device] on usb-0000:00:1d.0-1/input1

** Model information
sys_vendor: HP
product_name: ProLiant DL160 G5
product_version:    
chassis_vendor: HP
chassis_version:  
bios_vendor: HP
bios_version: O12

** Loaded modules:
Module                  Size  Used by
ipmi_devintf            6587  0 
iptable_mangle          2817  1 
xt_MARK                  917  1 
xt_multiport            2267  3 
ipt_REJECT              1953  15 
nf_conntrack_ipv4       9833  93 
nf_defrag_ipv4          1139  1 nf_conntrack_ipv4
xt_state                1303  93 
nf_conntrack_ftp        5537  0 
nf_conntrack           46535  3 nf_conntrack_ipv4,xt_state,nf_conntrack_ftp
xt_tcpudp               2319  409 
iptable_filter          2258  1 
ip_tables              13915  2 iptable_mangle,iptable_filter
x_tables               12845  6 xt_MARK,xt_multiport,ipt_REJECT,xt_state,xt_tcpudp,ip_tables
ext3                  106710  1 
jbd                    37317  1 ext3
mbcache                 5050  1 ext3
coretemp                4325  0 
ipmi_si                30960  0 
ipmi_msghandler        26634  2 ipmi_devintf,ipmi_si
ide_generic             1121  0 [permanent]
ide_cd_mod             24744  0 
ide_core               71722  2 ide_generic,ide_cd_mod
rng_core                3006  0 
shpchp                 26248  0 
i5400_edac              6680  0 
edac_core              29261  3 i5400_edac
pci_hotplug            21587  1 shpchp
snd_pcm                60487  0 
snd_timer              15598  1 snd_pcm
snd                    46526  2 snd_pcm,snd_timer
soundcore               4598  1 snd
snd_page_alloc          6249  1 snd_pcm
pcspkr                  1699  0 
i5k_amb                 4439  0 
evdev                   7352  3 
button                  4650  0 
processor              29935  0 
usbhid                 33292  0 
hid                    63257  1 usbhid
reiserfs              194124  2 
dm_mod                 53946  3 
raid1                  18431  4 
md_mod                 73920  5 raid1
sg                     24069  0 
uhci_hcd               18521  0 
sr_mod                 12602  0 
sd_mod                 29937  5 
cdrom                  29351  2 ide_cd_mod,sr_mod
crc_t10dif              1276  1 sd_mod
ehci_hcd               32097  0 
ata_generic             3239  0 
ata_piix               21124  4 
libata                133776  2 ata_generic,ata_piix
usbcore               123122  4 usbhid,uhci_hcd,ehci_hcd
nls_base                6377  1 usbcore
scsi_mod              126725  4 sg,sr_mod,sd_mod,libata
tg3                   104334  0 
libphy                 14054  1 tg3
thermal                11674  0 
thermal_sys            11942  2 processor,thermal

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 5400 Chipset Memory Controller Hub [8086:4003] (rev 20)
	Subsystem: Hewlett-Packard Company Device [103c:31f5]
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 11
	Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation 5400 Chipset PCI Express Port 1 [8086:4021] (rev 20) (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:05.0 PCI bridge [0604]: Intel Corporation 5400 Chipset PCI Express Port 5 [8086:4025] (rev 20) (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:09.0 PCI bridge [0604]: Intel Corporation 5400 Chipset PCI Express Port 9 [8086:4029] (rev 20) (prog-if 00 [Normal decode])
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=05, subordinate=08, sec-latency=0
	Memory behind bridge: fde00000-fdefffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:10.0 Host bridge [0600]: Intel Corporation 5400 Chipset FSB Registers [8086:4030] (rev 20)
	Subsystem: Hewlett-Packard Company Device [103c:31f5]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Kernel driver in use: i5400_edac

00:10.1 Host bridge [0600]: Intel Corporation 5400 Chipset FSB Registers [8086:4030] (rev 20)
	Subsystem: Hewlett-Packard Company Device [103c:31f5]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:10.2 Host bridge [0600]: Intel Corporation 5400 Chipset FSB Registers [8086:4030] (rev 20)
	Subsystem: Hewlett-Packard Company Device [103c:31f5]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:10.3 Host bridge [0600]: Intel Corporation 5400 Chipset FSB Registers [8086:4030] (rev 20)
	Subsystem: Hewlett-Packard Company Device [103c:31f5]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:10.4 Host bridge [0600]: Intel Corporation 5400 Chipset FSB Registers [8086:4030] (rev 20)
	Subsystem: Hewlett-Packard Company Device [103c:31f5]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:11.0 Host bridge [0600]: Intel Corporation 5400 Chipset CE/SF Registers [8086:4031] (rev 20)
	Subsystem: Hewlett-Packard Company Device [103c:31f5]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:15.0 Host bridge [0600]: Intel Corporation 5400 Chipset FBD Registers [8086:4035] (rev 20)
	Subsystem: Hewlett-Packard Company Device [103c:31f5]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:15.1 Host bridge [0600]: Intel Corporation 5400 Chipset FBD Registers [8086:4035] (rev 20)
	Subsystem: Hewlett-Packard Company Device [103c:31f5]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:16.0 Host bridge [0600]: Intel Corporation 5400 Chipset FBD Registers [8086:4036] (rev 20)
	Subsystem: Hewlett-Packard Company Device [103c:31f5]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:16.1 Host bridge [0600]: Intel Corporation 5400 Chipset FBD Registers [8086:4036] (rev 20)
	Subsystem: Hewlett-Packard Company Device [103c:31f5]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:1c.0 PCI bridge [0604]: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 [8086:2690] (rev 09) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 00001000-00001fff
	Memory behind bridge: fcb00000-fdbfffff
	Prefetchable memory behind bridge: 00000000faa00000-00000000fc9fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 2 [8086:2692] (rev 09) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: fdc00000-fdcfffff
	Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 3 [8086:2694] (rev 09) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: fdd00000-fddfffff
	Prefetchable memory behind bridge: 00000000f0200000-00000000f03fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 [8086:2688] (rev 09) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Device [103c:31fe]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 4: I/O ports at e080 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 [8086:2689] (rev 09) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Device [103c:31fe]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at e000 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #3 [8086:268a] (rev 09) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Device [103c:31fe]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at dc00 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.3 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #4 [8086:268b] (rev 09) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Device [103c:31fe]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 16
	Region 4: I/O ports at d880 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller [8086:268c] (rev 09) (prog-if 20 [EHCI])
	Subsystem: Hewlett-Packard Company Device [103c:31fe]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at fdfff800 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev d9) (prog-if 01 [Subtractive decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller [8086:2670] (rev 09)
	Subsystem: Hewlett-Packard Company Device [103c:31fe]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:1f.1 IDE interface [0101]: Intel Corporation 631xESB/632xESB IDE Controller [8086:269e] (rev 09) (prog-if 8a [Master SecP PriP])
	Subsystem: Hewlett-Packard Company Device [103c:31fe]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 18
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at ffa0 [size=16]
	Kernel driver in use: ata_piix

00:1f.2 IDE interface [0101]: Intel Corporation 631xESB/632xESB/3100 Chipset SATA IDE Controller [8086:2680] (rev 09) (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: Hewlett-Packard Company Device [103c:31f6]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 0: I/O ports at ec00 [size=8]
	Region 1: I/O ports at e880 [size=4]
	Region 2: I/O ports at e800 [size=8]
	Region 3: I/O ports at e480 [size=4]
	Region 4: I/O ports at e400 [size=16]
	Region 5: Memory at fdfffc00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ata_piix

02:00.0 VGA compatible controller [0300]: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) [102b:0522] (rev 02) (prog-if 00 [VGA controller])
	Subsystem: Hewlett-Packard Company Device [103c:31fa]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort+ <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at fb000000 (32-bit, prefetchable) [size=16M]
	Region 1: Memory at fdbfc000 (32-bit, non-prefetchable) [size=16K]
	Region 2: Memory at fd000000 (32-bit, non-prefetchable) [size=8M]
	Expansion ROM at fdbe0000 [disabled] [size=64K]
	Capabilities: <access denied>

03:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5722 Gigabit Ethernet PCI Express [14e4:165a]
	Subsystem: Hewlett-Packard Company NC105i PCIe Gigabit Server Adapter [103c:7051]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 79
	Region 0: Memory at fdcf0000 (64-bit, non-prefetchable) [size=64K]
	Expansion ROM at <ignored> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: tg3

04:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5722 Gigabit Ethernet PCI Express [14e4:165a]
	Subsystem: Hewlett-Packard Company NC105i PCIe Gigabit Server Adapter [103c:7051]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at fddf0000 (64-bit, non-prefetchable) [size=64K]
	Expansion ROM at <ignored> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: tg3

05:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Upstream Port [8086:3500] (rev 01) (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=05, secondary=06, subordinate=07, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

05:00.3 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express to PCI-X Bridge [8086:350c] (rev 01) (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=05, secondary=08, subordinate=08, sec-latency=64
	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

06:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E1 [8086:3510] (rev 01) (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=06, secondary=07, subordinate=07, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport


** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 0000:0000  
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 6.0.5
  APT prefers oldstable
  APT policy: (500, 'oldstable'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_GB, LC_CTYPE=en_GB (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii  debconf [debconf-2.0]         1.5.36.1   Debian configuration management sy
ii  initramfs-tools [linux-initra 0.98.8     tools for generating an initramfs
ii  linux-base                    2.6.32-45  Linux image base package
ii  module-init-tools             3.12-2     tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii  firmware-linux-free           2.6.32-45  Binary firmware for various driver

Versions of packages linux-image-2.6.32-5-amd64 suggests:
ii  grub                          0.97-64    GRand Unified Bootloader (dummy pa
pn  linux-doc-2.6.32              <none>     (no description available)

Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn  firmware-bnx2              <none>        (no description available)
pn  firmware-bnx2x             <none>        (no description available)
pn  firmware-ipw2x00           <none>        (no description available)
pn  firmware-ivtv              <none>        (no description available)
pn  firmware-iwlwifi           <none>        (no description available)
ii  firmware-linux             0.28+squeeze1 Binary firmware for various driver
ii  firmware-linux-nonfree     0.28+squeeze1 Binary firmware for various driver
pn  firmware-qlogic            <none>        (no description available)
pn  firmware-ralink            <none>        (no description available)
pn  xen-hypervisor             <none>        (no description available)

-- debconf information:
* linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
  linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
  linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
  linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true

--- End Message ---

--- Begin Message ---

To: 679550-done@bugs.debian.org, 679906-done@bugs.debian.org, 680608-done@bugs.debian.org, 681354-done@bugs.debian.org, 687144-done@bugs.debian.org, 687540-done@bugs.debian.org, 693539-done@bugs.debian.org, 694130-done@bugs.debian.org

Subject: Closing

From: Moritz Mühlenhoff <jmm@inutil.org>

Date: Tue, 2 Jul 2013 22:28:07 +0200

Message-id: <20130702202807.GB4762@pisco.westfalen.local>
Hi,
your bug has been filed against the "linux-2.6" source package and was filed for
a kernel older than the recently released Debian 7.x / Wheezy with a severity
less than important.

We don't have the ressources to reproduce the complete backlog of all older kernel
bugs, so we're closing this bug for now. If you can reproduce the bug with Debian Wheezy
or a more recent kernel from testing or unstable, please reopen the bug by sending
a mail to control@bugs.debian.org with the following three commands included in the
mail:

reopen BUGNUMBER
reassign BUGNUMBER src:linux
thanks

Cheers,
        Moritz
--- End Message ---

Reply to:

Prev by Date: Bug#687144: marked as done (linux-image-2.6.32-5-amd64: quotas stopped working/updating)
Next by Date: Bug#693539: marked as done (mpt2sas: mpt2sas changes SATA drive state from standby to active/idle on temperature read)
Previous by thread: Bug#687144: marked as done (linux-image-2.6.32-5-amd64: quotas stopped working/updating)
Next by thread: Bug#693539: marked as done (mpt2sas: mpt2sas changes SATA drive state from standby to active/idle on temperature read)
Index(es):
- Date
- Thread