Bug#516007: linux-image: sata drive connected via marvell controller crashes
On Sat, Feb 14, 2009 at 07:35:01PM +0100, Mark Poks wrote:
> Package: linux-image
> Severity: important
>
> i have ASUS M2N32 WS Professionall mainboard with latest BIOS revision 2001.
> it has two controllers for sata:
> - standard (nvidia)
> - marvell
>
> and also i have two sata II disks:
> 1 - with Debian 32-bit, kernel 2.6.26-1-686-bigmem - plugged in standard sata
> 2 - with Debian 64-bit, kernel 2.6.26-1-amd64 - plugged in marvell sata
>
> the standard sata controller works fine, but i have problems with the marvell.
>
> * when booting disk 1 (disk 2 is connected to marvell controller) system does
> not boot up correctly. it holds-on - see photo:
>
> http://develop.euroimpex.pl/~marek/boot/dsc00226.jpg
>
> last few lines of long display in a loop if waiting longer..
>
> * when booting disk 1, with disk 2 unplugged, system starts fine ofcourse,
> but when plugin disk 2 to marvell (when system is on), the message
> 'Disabling IRQ #16' appears in console and system hangs-up.
>
> * i tried also bootup from disk 2 (marvell controller), the grub started,
> kernel started to doing it's job, but it crashed - see photo:
>
> http://develop.euroimpex.pl/~marek/boot/dsc00227.jpg
>
> maybe i am doing something wrong? maybe my mainboard has a bug, or maybe
> it's something wrong in kernel? or maybe i have badly configured IRQs in the
> BIOS? - not sure
Sorry for the late response.
Please try to reproduce if the problem persists with the current
snapshot kernel from trunk: http://wiki.debian.org/DebianKernel
If so, please file a bug report at bugzilla.kernel.org
Cheers,
Moritz
Reply to: