2006/11/14, Nate Duehr <nate@natetech.com>:
All of the above said, it could also be a driver issue with the card... hunt Google and other sources for reports about your particular Intel chipset cards. Nate
thanks for this exhaustive help ;) Cisco looks OK : #sh mac- dynamic | include f557
0014.8510.f557 Dynamic 240 FastEthernet0/6
#sh int fa 0/6
FastEthernet0/6 is up, line protocol is up
Hardware is Fast Ethernet, address is 0009.b7cd.1446 (bia
0009.b7cd.1446)
...
5 minute input rate 4063000 bits/sec, 1300 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
2308327 packets input, 888570174 bytes
Received 5 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast
0 input packets with dribble condition detected
519 packets output, 1642156307 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
But I'll change the ethernet cable .. there were some servers mounted during last week that could generate some noise or anyway they could just pull the cable in an accident or something... More or less - the server should not report so many errors on the link and i'll trace this problem down... thanks Wojciech -- Wojciech Ziniewicz | jid:zeth@chrome.pl http://silenceproject.org | http://zetho.wordpress.com