RE: Example configuration
sup pple
now i have a new stuff on my net config
simpson:/etc# ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:01:80:09:6A:3F
inet addr:10.30.142.1 Bcast:10.30.142.255 Mask:255.255.255.0
inet6 addr: fd27:2b14:2baf:0:201:80ff:fe09:6a3f/64 Scope:Global
inet6 addr: fe80::201:80ff:fe09:6a3f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1010534 errors:0 dropped:0 overruns:0 frame:0
TX packets:1039876 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:902089629 (860.2 MiB) TX bytes:928412107 (885.4 MiB)
Interrupt:11 Base address:0xc000 Memory:e4000000-e4000038
in that case what i have to do?
(keep reading docs im working on it )
but some hand would be ok 4 me ;)
>
>
> -----Original Message-----
> From: itachi@cnt.uo.edu.cu [mailto:itachi@cnt.uo.edu.cu]
> Sent: Friday, April 21, 2006 5:43 PM
> To: Bastien Durel
> Cc: debian-ipv6@lists.debian.org
> Subject: Re: Example configuration
>
>
>> itachi@cnt.uo.edu.cu a écrit :
>>> hey pple at this time i finally (i think) i made my two ipv6 computers
>>> c
>>> each
>>> at moment icmp work okok
>>>
>>> check this out
>>> pc debian#1 with ipv4-6
>>> debhelper:/# ping6 -Ieth0 -c3 fe80::20c:29ff:fe44:e718
>>> PING fe80::20c:29ff:fe44:e718(fe80::20c:29ff:fe44:e718) from
>>> fe80::20c:29ff:fec2:f77d et
>>> h0: 56 data bytes
>>> 64 bytes from fe80::20c:29ff:fe44:e718: icmp_seq=1 ttl=64 time=1.23 ms
>>> 64 bytes from fe80::20c:29ff:fe44:e718: icmp_seq=2 ttl=64 time=1.13 ms
>>> 64 bytes from fe80::20c:29ff:fe44:e718: icmp_seq=3 ttl=64 time=0.844 ms
>>>
>>> --- fe80::20c:29ff:fe44:e718 ping statistics ---
>>> 3 packets transmitted, 3 received, 0% packet loss, time 2025ms
>>> rtt min/avg/max/mdev = 0.844/1.071/1.238/0.170 ms
>>>
>>> pc2 debian#2 with ipv4-6
>>>
>>>
>>> ruter-deb:~# ping6 -I eth0 -c2 fe80::20c:29ff:fec2:f77d
>>> PING fe80::20c:29ff:fec2:f77d(fe80::20c:29ff:fec2:f77d)
>>> from fe80::20c:29ff:fe44:e718 eth0: 56 data bytes
>>> 64 bytes from fe80::20c:29ff:fec2:f77d: icmp_seq=1 ttl=64 time=22.2 ms
>>> 64 bytes from fe80::20c:29ff:fec2:f77d: icmp_seq=2 ttl=64 time=1.55 ms
>>>
>>> --- fe80::20c:29ff:fec2:f77d ping statistics ---
>>> 2 packets transmitted, 2 received, 0% packet loss, time 1007ms
>>> rtt min/avg/max/mdev = 1.552/11.918/22.285/10.367 ms
>>>
>>> what is next step ?
>>> example telnet ssh to an ipv6 addres
>>> ssh guestn@fe80::20c:29ff:fec2:f77d
>>>
>> You cannot use link-local address to connect to ssh. You must use global
>> addresses.
> how come that ???
>
> Because link-local addresses are scoped for on-link purposes only. It is
> mainly
> used for neighbor discovery process determining each others node on a link
> without human intervention. Please visit IPv6style site for more
> information on
> IPv6you're your concern on
> http://www.ipv6style.jp/en/tech/20030228/index.shtml
> and http://www.ipv6style.jp/en/tech/20030120/20030120_p.shtml . Please
> read also
> Linux IPv6 Howto by Peter Bieringer for more information on Linux IPv6
> http://www.tldp.org/HOWTO/Linux+IPv6-HOWTO/.
>
>
> What about radvdump ?
>
>
> ruter-deb:~# radvdump
> Router advertisement from fe80::20c:29ff:fe44:e718 (hoplimit 255)
> Received by interface eth0
> # Note: {Min,Max}RtrAdvInterval cannot be obtained with radvdump
> AdvCurHopLimit: 64
> AdvManagedFlag: off
> AdvOtherConfigFlag: off
> AdvHomeAgentFlag: off
> AdvReachableTime: 0
> AdvRetransTimer: 0
> AdvDefaultPreference: medium
> Prefix fd27:2b14:2baf::/48
> AdvValidLifetime: 2592000
> AdvPreferredLifetime: 604800
> AdvOnLink: on
> AdvAutonomous: on
> AdvRouterAddr: off
> AdvSourceLLAddress: 00 0C 29 44 E7 18
>
>
>
>
>>
>> --
>> Bastien.
>>
>
>
> -------------------------------------------------
> Luis A. Rondon Paz
> L I N U X .~. Admin intranet CNT
> The Choice /V\ icq #132736035
> of a GNU /( )\ itachi@cnt.uo.edu.cu
> Generation ^^-^^ Santiago de cuba
> UONET
>
>
>
>
>
>
>
> ###########
> ###############
> #### ####
> - ,$$P' ###
> - ',$$P ,-*** ###
> - `d$$' ,## * ###
> - $$P ## * ###
> - $$: ## - ###
> - $$; ### ###
> - Y$$. ` #######
> - `$$b "-.__
> - `Y$$b
> - `Y$$.
> - `$$b.
> - `Y$$b.
> - `"Y$b._
> -------------------------------------------------
>
>
>
-------------------------------------------------
Luis A. Rondon Paz
L I N U X .~. Admin intranet CNT
The Choice /V\ icq #132736035
of a GNU /( )\ itachi@cnt.uo.edu.cu
Generation ^^-^^ Santiago de cuba
UONET
###########
###############
#### ####
- ,$$P' ###
- ',$$P ,-*** ###
- `d$$' ,## * ###
- $$P ## * ###
- $$: ## - ###
- $$; ### ###
- Y$$. ` #######
- `$$b "-.__
- `Y$$b
- `Y$$.
- `$$b.
- `Y$$b.
- `"Y$b._
-------------------------------------------------
Reply to: