Bug#771133: xserver-xorg-video-intel: colored line on right side / bottom of video
Package: xserver-xorg-video-intel
Version: 2:2.99.916+git20141119-1~exp1
Severity: normal
Hello,
With vlc 2.2.x I'm getting a color distorted pixel row at the bottom
and/or a column at the right side of a video if using hardware
accelerated overlay xvideo output. This was reported as #765969 [1]
against vlc but for now is considered a driver bug:
,----[ Rémi Denis-Courmont ]-
| troubleshooting it on an affected system and so far it does seem like a
| driver bug: the driver is blending the last line of visible pixels with
| the first line of pixels outside the visible area. All zeroes
| corresponds to dark green in YUV colours space.
`----
So here I am. This happens in fullscreen and windowed mode and the color
pattern of the line is changing if, e.g. I move a second window around.
Test case: Big Buck Bunny[2] is a nice example: I tried the video in
854x480 and both mp4 and ogg give me a color-distorted column at the
right side. If I try the 1920x1080-version the bottom row is affected.
Screenshots from the other bug report:
https://bugs.debian.org/cgi-bin/bugreport.cgi?msg=50;filename=bottom.png;att=1;bug=765969
https://bugs.debian.org/cgi-bin/bugreport.cgi?msg=50;filename=rightside.png;att=2;bug=765969
On another occasion I saw two rows affected where the bottom row is a
more solid color and the row above it is only slightly tainted with the
actual content shining through.
Regards,
Dirk
[1] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=765969
[2] https://peach.blender.org/download/
-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Mar 11 2011 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 2556784 Nov 3 22:52 /usr/bin/Xorg
VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03)
Xorg X server configuration file status:
----------------------------------------
-rw-r--r-- 1 root root 993 Oct 6 13:49 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
-------------------------------
Section "ServerFlags"
Option "AIGLX" "off"
EndSection
Section "InputDevice"
Identifier "Internal Touchpad"
Driver "synaptics"
Option "PalmMinWidth" "4"
Option "LockedDrags" "on"
Option "LockedDragTimeout" "500"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
Option "HorizTwoFingerScroll" "1"
# Option "UpDownScrollRepeat" "on"
# Option "ScrollButtonRepeat" "100"
EndSection
Section "Extensions"
Option "Composite" "false"
EndSection
Section "Monitor"
Identifier "LVDS"
DisplaySize 285 214
# Option "Primary" "true"
EndSection
Section "Device"
Identifier "Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller"
Driver "intel"
Option "AccelMethod" "sna"
Option "XvMC" "on"
Option "XvMCSurfaces" "6"
Option "RelaxedFencing" "on"
Option "Monitor-LVDS1" "LVDS"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
InputDevice "Internal Touchpad"
EndSection
/etc/X11/xorg.conf.d does not exist.
/etc/modprobe.d contains no KMS configuration files.
Kernel version (/proc/version):
-------------------------------
Linux version 3.16.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-13) ) #1 SMP Debian 3.16.7-2 (2014-11-06)
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 58814 Jul 27 2012 /var/log/Xorg.2.log
-rw-r--r-- 1 root root 32283 Jun 13 12:24 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 31359 Nov 24 10:53 /var/log/Xorg.0.log
Xorg.log and udev: see attached file
DRM Information from dmesg:
---------------------------
[ 0.887984] Linux agpgart interface v0.103
[ 0.888277] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[ 0.888311] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 0.889271] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 0.889520] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 1.046916] [drm] Initialized drm 1.1.0 20060810
[ 1.079423] [drm] Memory usable by graphics device = 256M
[ 1.079430] [drm] Replacing VGA console driver
[ 1.085333] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.085340] [drm] Driver supports precise vblank timestamp query.
[ 1.208755] [drm] initialized overlay support
[ 1.425697] fbcon: inteldrmfb (fb0) is primary device
[ 2.685471] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.712038] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 9376.717048] drm: not enough stolen space for compressed buffer (need 10485760 more bytes), disabling. Hint: you may be able to increase stolen memory size in the BIOS to avoid this.
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (500, 'unstable'), (101, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 3.16.0-4-686-pae (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg-video-intel depends on:
ii libc6 2.19-13
ii libdrm-intel1 2.4.58-2
ii libdrm2 2.4.58-2
ii libpciaccess0 0.13.2-3
ii libpixman-1-0 0.32.6-3
ii libudev1 215-6
ii libx11-6 2:1.6.2-3
ii libx11-xcb1 2:1.6.2-3
ii libxcb-dri2-0 1.10-3+b1
ii libxcb-dri3-0 1.10-3+b1
ii libxcb-sync1 1.10-3+b1
ii libxcb-util0 0.3.8-3
ii libxcb1 1.10-3+b1
ii libxcursor1 1:1.1.14-1+b1
ii libxdamage1 1:1.1.4-2
ii libxext6 2:1.3.3-1
ii libxfixes3 1:5.0.1-2+b1
ii libxinerama1 2:1.1.3-1+b1
ii libxrandr2 2:1.4.2-1+b1
ii libxrender1 1:0.9.8-1+b1
ii libxshmfence1 1.1-4
ii libxtst6 2:1.2.2-1+b1
ii libxv1 2:1.0.10-1+b1
ii libxvmc1 2:1.0.8-2+b1
ii xserver-xorg-core [xorg-video-abi-18] 2:1.16.1.901-1
xserver-xorg-video-intel recommends no packages.
xserver-xorg-video-intel suggests no packages.
-- no debconf information
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 75633.803]
X.Org X Server 1.16.1.901 (1.16.2 RC 1)
Release Date: 2014-11-02
[ 75633.803] X Protocol Version 11, Revision 0
[ 75633.803] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian
[ 75633.803] Current Operating System: Linux foo 3.16.0-4-686-pae #1 SMP Debian 3.16.7-2 (2014-11-06) i686
[ 75633.803] Kernel command line: BOOT_IMAGE=/vmlinuz initrd=/initrd.img root=/dev/sda1 ro quiet pcie_aspm=force
[ 75633.803] Build Date: 03 November 2014 09:48:56PM
[ 75633.803] xorg-server 2:1.16.1.901-1 (http://www.debian.org/support)
[ 75633.803] Current version of pixman: 0.32.6
[ 75633.803] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 75633.803] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 75633.803] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 24 10:53:04 2014
[ 75633.804] (==) Using config file: "/etc/X11/xorg.conf"
[ 75633.804] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 75633.804] (==) ServerLayout "Default Layout"
[ 75633.804] (==) No screen section available. Using defaults.
[ 75633.804] (**) |-->Screen "Default Screen Section" (0)
[ 75633.804] (**) | |-->Monitor "<default monitor>"
[ 75633.805] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 75633.805] (**) | |-->Device "Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller"
[ 75633.805] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 75633.805] (**) |-->Input Device "Internal Touchpad"
[ 75633.805] (**) Option "AIGLX" "off"
[ 75633.805] (==) Automatically adding devices
[ 75633.805] (==) Automatically enabling devices
[ 75633.805] (==) Automatically adding GPU devices
[ 75633.805] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 75633.805] Entry deleted from font path.
[ 75633.805] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 75633.805] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 75633.805] (**) Extension "Composite" is disabled
[ 75633.805] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 75633.805] (II) Loader magic: 0xb7741700
[ 75633.805] (II) Module ABI versions:
[ 75633.805] X.Org ANSI C Emulation: 0.4
[ 75633.805] X.Org Video Driver: 18.0
[ 75633.805] X.Org XInput driver : 21.0
[ 75633.805] X.Org Server Extension : 8.0
[ 75633.805] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 75633.808] (--) PCI:*(0:0:2:0) 8086:27a2:10cf:137a rev 3, Mem @ 0xf0200000/524288, 0xe0000000/268435456, 0xf0300000/262144, I/O @ 0x00001800/8
[ 75633.808] (--) PCI: (0:0:2:1) 8086:27a6:10cf:137a rev 3, Mem @ 0xf0280000/524288
[ 75633.808] (II) LoadModule: "glx"
[ 75633.808] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 75633.810] (II) Module glx: vendor="X.Org Foundation"
[ 75633.810] compiled for 1.16.1.901, module version = 1.0.0
[ 75633.810] ABI class: X.Org Server Extension, version 8.0
[ 75633.810] (**) AIGLX disabled
[ 75633.810] (II) LoadModule: "intel"
[ 75633.810] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 75633.811] (II) Module intel: vendor="X.Org Foundation"
[ 75633.811] compiled for 1.16.1.901, module version = 2.99.916
[ 75633.811] Module class: X.Org Video Driver
[ 75633.811] ABI class: X.Org Video Driver, version 18.0
[ 75633.811] (II) LoadModule: "synaptics"
[ 75633.811] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 75633.811] (II) Module synaptics: vendor="X.Org Foundation"
[ 75633.811] compiled for 1.16.0.901, module version = 1.8.99
[ 75633.811] Module class: X.Org XInput Driver
[ 75633.811] ABI class: X.Org XInput driver, version 21.0
[ 75633.811] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 75633.812] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 75633.812] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 75633.812] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 75633.812] (++) using VT number 7
[ 75633.812] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[ 75633.812] (WW) xf86OpenConsole: setsid failed: Operation not permitted
[ 75633.819] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20080730
[ 75633.819] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.916+git20141119-1~exp1 (maximilian attems <maks@debian.org>)
[ 75633.819] (--) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
[ 75633.819] (--) intel(0): CPU: x86, sse2, sse3
[ 75633.819] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 75633.819] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 75633.819] (==) intel(0): RGB weight 888
[ 75633.819] (==) intel(0): Default visual is TrueColor
[ 75633.819] (**) intel(0): Option "AccelMethod" "sna"
[ 75633.819] (**) intel(0): Option "XvMC" "on"
[ 75633.820] (II) intel(0): Output LVDS1 using monitor section LVDS
[ 75633.820] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1
[ 75633.820] (II) intel(0): Enabled output LVDS1
[ 75633.820] (II) intel(0): Output VGA1 has no monitor section
[ 75633.820] (II) intel(0): Enabled output VGA1
[ 75633.820] (II) intel(0): Output DVI1 has no monitor section
[ 75633.820] (II) intel(0): Enabled output DVI1
[ 75633.820] (II) intel(0): Output TV1 has no monitor section
[ 75633.820] (II) intel(0): Enabled output TV1
[ 75633.820] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 75633.820] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 75633.820] (II) intel(0): Enabled output VIRTUAL1
[ 75633.820] (--) intel(0): Output LVDS1 using initial mode 1024x768 on pipe 1
[ 75633.820] (--) intel(0): Output DVI1 using initial mode 1280x1024 on pipe 0
[ 75633.820] (==) intel(0): TearFree disabled
[ 75633.820] (==) intel(0): DPI set to (96, 96)
[ 75633.820] (II) Loading sub module "dri2"
[ 75633.820] (II) LoadModule: "dri2"
[ 75633.820] (II) Module "dri2" already built-in
[ 75633.820] (II) Loading sub module "present"
[ 75633.820] (II) LoadModule: "present"
[ 75633.820] (II) Module "present" already built-in
[ 75633.821] (==) Depth 24 pixmap format is 32 bpp
[ 75633.821] (II) intel(0): SNA initialized with Alviso (gen3) backend
[ 75633.821] (==) intel(0): Backing store disabled
[ 75633.821] (==) intel(0): Silken mouse enabled
[ 75633.821] (II) intel(0): HW Cursor enabled
[ 75633.821] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 75633.821] (==) intel(0): DPMS enabled
[ 75633.821] (==) intel(0): display hotplug detection enabled
[ 75633.821] (II) intel(0): [XvMC] i915_xvmc driver initialized.
[ 75633.821] (II) intel(0): [DRI2] Setup complete
[ 75633.821] (II) intel(0): [DRI2] DRI driver: i915
[ 75633.821] (II) intel(0): [DRI2] VDPAU driver: i915
[ 75633.821] (II) intel(0): direct rendering: DRI2 enabled
[ 75633.821] (II) intel(0): hardware support for Present enabled
[ 75633.821] (WW) intel(0): Option "XvMCSurfaces" is not used
[ 75633.821] (WW) intel(0): Option "RelaxedFencing" is not used
[ 75633.821] (--) RandR disabled
[ 75633.836] (II) SELinux: Disabled on system
[ 75633.853] (II) AIGLX: Loaded and initialized swrast
[ 75633.853] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 75633.866] (II) intel(0): switch to mode 1280x1024@60.0 on DVI1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 75633.892] (II) intel(0): switch to mode 1024x768@60.0 on LVDS1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 75633.900] (II) intel(0): Setting screen physical size to 285 x 214
[ 75633.959] (II) Using input driver 'synaptics' for 'Internal Touchpad'
[ 75633.959] (**) Internal Touchpad: always reports core events
[ 75634.056] (--) synaptics: Internal Touchpad: auto-dev sets device to /dev/input/event5
[ 75634.080] (**) Option "Device" "/dev/input/event5"
[ 75634.080] (--) synaptics: Internal Touchpad: x-axis range 1472 - 5472 (res 69)
[ 75634.080] (--) synaptics: Internal Touchpad: y-axis range 1408 - 4448 (res 100)
[ 75634.080] (--) synaptics: Internal Touchpad: pressure range 0 - 255
[ 75634.080] (--) synaptics: Internal Touchpad: finger width range 0 - 15
[ 75634.080] (--) synaptics: Internal Touchpad: buttons: left right double triple scroll-buttons
[ 75634.080] (--) synaptics: Internal Touchpad: Vendor 0x2 Product 0x7
[ 75634.080] (**) Option "HorizTwoFingerScroll" "1"
[ 75634.080] (**) Option "LockedDrags" "on"
[ 75634.080] (**) Option "LockedDragTimeout" "500"
[ 75634.080] (**) Option "TapButton1" "1"
[ 75634.080] (**) Option "TapButton2" "2"
[ 75634.080] (**) Option "TapButton3" "3"
[ 75634.080] (**) Option "PalmMinWidth" "4"
[ 75634.080] (--) synaptics: Internal Touchpad: touchpad found
[ 75634.080] (**) Internal Touchpad: always reports core events
[ 75634.104] (II) XINPUT: Adding extended input device "Internal Touchpad" (type: TOUCHPAD, id 6)
[ 75634.104] (**) synaptics: Internal Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 75634.104] (**) synaptics: Internal Touchpad: (accel) MaxSpeed is now 1.75
[ 75634.104] (**) synaptics: Internal Touchpad: (accel) AccelFactor is now 0.040
[ 75634.104] (**) Internal Touchpad: (accel) keeping acceleration scheme 1
[ 75634.104] (**) Internal Touchpad: (accel) acceleration profile 1
[ 75634.104] (**) Internal Touchpad: (accel) acceleration factor: 2.000
[ 75634.104] (**) Internal Touchpad: (accel) acceleration threshold: 4
[ 75634.104] (--) synaptics: Internal Touchpad: touchpad found
[ 75634.108] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 75634.109] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 75634.109] (II) LoadModule: "evdev"
[ 75634.109] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 75634.109] (II) Module evdev: vendor="X.Org Foundation"
[ 75634.109] compiled for 1.16.0, module version = 2.9.0
[ 75634.109] Module class: X.Org XInput Driver
[ 75634.109] ABI class: X.Org XInput driver, version 21.0
[ 75634.109] (II) Using input driver 'evdev' for 'Power Button'
[ 75634.109] (**) Power Button: always reports core events
[ 75634.109] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 75634.110] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 75634.110] (--) evdev: Power Button: Found keys
[ 75634.110] (II) evdev: Power Button: Configuring as keyboard
[ 75634.110] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event3"
[ 75634.110] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 75634.110] (**) Option "xkb_rules" "evdev"
[ 75634.110] (**) Option "xkb_model" "pc105"
[ 75634.110] (**) Option "xkb_layout" "de"
[ 75634.110] (**) Option "xkb_variant" "nodeadkeys"
[ 75634.110] (**) Option "xkb_options" "lv3:ralt_switch,compose:caps,keypad:pointerkeys"
[ 75634.144] (II) config/udev: Adding input device Fujitsu FUJ02E3 (/dev/input/event8)
[ 75634.144] (**) Fujitsu FUJ02E3: Applying InputClass "evdev keyboard catchall"
[ 75634.144] (II) Using input driver 'evdev' for 'Fujitsu FUJ02E3'
[ 75634.144] (**) Fujitsu FUJ02E3: always reports core events
[ 75634.144] (**) evdev: Fujitsu FUJ02E3: Device: "/dev/input/event8"
[ 75634.144] (--) evdev: Fujitsu FUJ02E3: Vendor 0 Product 0x6
[ 75634.144] (--) evdev: Fujitsu FUJ02E3: Found keys
[ 75634.144] (II) evdev: Fujitsu FUJ02E3: Configuring as keyboard
[ 75634.144] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/FUJ02E3:00/input/input12/event8"
[ 75634.144] (II) XINPUT: Adding extended input device "Fujitsu FUJ02E3" (type: KEYBOARD, id 8)
[ 75634.144] (**) Option "xkb_rules" "evdev"
[ 75634.144] (**) Option "xkb_model" "pc105"
[ 75634.144] (**) Option "xkb_layout" "de"
[ 75634.144] (**) Option "xkb_variant" "nodeadkeys"
[ 75634.144] (**) Option "xkb_options" "lv3:ralt_switch,compose:caps,keypad:pointerkeys"
[ 75634.145] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 75634.145] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 75634.145] (II) Using input driver 'evdev' for 'Video Bus'
[ 75634.145] (**) Video Bus: always reports core events
[ 75634.145] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 75634.145] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 75634.145] (--) evdev: Video Bus: Found keys
[ 75634.145] (II) evdev: Video Bus: Configuring as keyboard
[ 75634.145] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8/event4"
[ 75634.145] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[ 75634.145] (**) Option "xkb_rules" "evdev"
[ 75634.145] (**) Option "xkb_model" "pc105"
[ 75634.145] (**) Option "xkb_layout" "de"
[ 75634.145] (**) Option "xkb_variant" "nodeadkeys"
[ 75634.145] (**) Option "xkb_options" "lv3:ralt_switch,compose:caps,keypad:pointerkeys"
[ 75634.146] (II) config/udev: Adding input device Fujitsu FUJ02B1 (/dev/input/event7)
[ 75634.146] (**) Fujitsu FUJ02B1: Applying InputClass "evdev keyboard catchall"
[ 75634.146] (II) Using input driver 'evdev' for 'Fujitsu FUJ02B1'
[ 75634.146] (**) Fujitsu FUJ02B1: always reports core events
[ 75634.146] (**) evdev: Fujitsu FUJ02B1: Device: "/dev/input/event7"
[ 75634.146] (--) evdev: Fujitsu FUJ02B1: Vendor 0 Product 0x6
[ 75634.146] (--) evdev: Fujitsu FUJ02B1: Found keys
[ 75634.146] (II) evdev: Fujitsu FUJ02B1: Configuring as keyboard
[ 75634.146] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/FUJ02B1:00/input/input11/event7"
[ 75634.146] (II) XINPUT: Adding extended input device "Fujitsu FUJ02B1" (type: KEYBOARD, id 10)
[ 75634.146] (**) Option "xkb_rules" "evdev"
[ 75634.146] (**) Option "xkb_model" "pc105"
[ 75634.146] (**) Option "xkb_layout" "de"
[ 75634.146] (**) Option "xkb_variant" "nodeadkeys"
[ 75634.146] (**) Option "xkb_options" "lv3:ralt_switch,compose:caps,keypad:pointerkeys"
[ 75634.147] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 75634.147] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 75634.147] (II) Using input driver 'evdev' for 'Power Button'
[ 75634.147] (**) Power Button: always reports core events
[ 75634.147] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 75634.147] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 75634.147] (--) evdev: Power Button: Found keys
[ 75634.147] (II) evdev: Power Button: Configuring as keyboard
[ 75634.147] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event2"
[ 75634.147] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 11)
[ 75634.147] (**) Option "xkb_rules" "evdev"
[ 75634.147] (**) Option "xkb_model" "pc105"
[ 75634.147] (**) Option "xkb_layout" "de"
[ 75634.147] (**) Option "xkb_variant" "nodeadkeys"
[ 75634.148] (**) Option "xkb_options" "lv3:ralt_switch,compose:caps,keypad:pointerkeys"
[ 75634.148] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 75634.148] (II) No input driver specified, ignoring this device.
[ 75634.148] (II) This device may have been added with another device file.
[ 75634.149] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 75634.149] (II) No input driver specified, ignoring this device.
[ 75634.149] (II) This device may have been added with another device file.
[ 75634.149] (II) config/udev: Adding input device HDA Intel Dock Mic (/dev/input/event9)
[ 75634.149] (II) No input driver specified, ignoring this device.
[ 75634.149] (II) This device may have been added with another device file.
[ 75634.150] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10)
[ 75634.150] (II) No input driver specified, ignoring this device.
[ 75634.150] (II) This device may have been added with another device file.
[ 75634.150] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event11)
[ 75634.150] (II) No input driver specified, ignoring this device.
[ 75634.150] (II) This device may have been added with another device file.
[ 75634.150] (II) config/udev: Adding input device HDA Intel Dock Headphone (/dev/input/event12)
[ 75634.150] (II) No input driver specified, ignoring this device.
[ 75634.150] (II) This device may have been added with another device file.
[ 75634.151] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event14)
[ 75634.151] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 75634.151] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 75634.151] (**) Logitech USB Keyboard: always reports core events
[ 75634.151] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event14"
[ 75634.151] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc303
[ 75634.151] (--) evdev: Logitech USB Keyboard: Found keys
[ 75634.151] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 75634.151] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-4/5-4.2/5-4.2.1/5-4.2.1:1.0/0003:046D:C303.0003/input/input24/event14"
[ 75634.151] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 12)
[ 75634.151] (**) Option "xkb_rules" "evdev"
[ 75634.151] (**) Option "xkb_model" "pc105"
[ 75634.151] (**) Option "xkb_layout" "de"
[ 75634.151] (**) Option "xkb_variant" "nodeadkeys"
[ 75634.151] (**) Option "xkb_options" "lv3:ralt_switch,compose:caps,keypad:pointerkeys"
[ 75634.152] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event15)
[ 75634.152] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 75634.152] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 75634.152] (**) Logitech USB Keyboard: always reports core events
[ 75634.152] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event15"
[ 75634.152] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc303
[ 75634.152] (--) evdev: Logitech USB Keyboard: Found keys
[ 75634.152] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 75634.152] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-4/5-4.2/5-4.2.1/5-4.2.1:1.1/0003:046D:C303.0004/input/input25/event15"
[ 75634.153] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 13)
[ 75634.153] (**) Option "xkb_rules" "evdev"
[ 75634.153] (**) Option "xkb_model" "pc105"
[ 75634.153] (**) Option "xkb_layout" "de"
[ 75634.153] (**) Option "xkb_variant" "nodeadkeys"
[ 75634.153] (**) Option "xkb_options" "lv3:ralt_switch,compose:caps,keypad:pointerkeys"
[ 75634.153] (II) config/udev: Adding input device Wacom Graphire2 4x5 (/dev/input/event13)
[ 75634.153] (**) Wacom Graphire2 4x5: Applying InputClass "evdev tablet catchall"
[ 75634.153] (**) Wacom Graphire2 4x5: Applying InputClass "Wacom USB device class"
[ 75634.153] (**) Wacom Graphire2 4x5: Applying InputClass "Wacom class"
[ 75634.153] (II) LoadModule: "wacom"
[ 75634.154] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[ 75634.154] (II) Module wacom: vendor="X.Org Foundation"
[ 75634.154] compiled for 1.16.1, module version = 0.26.0
[ 75634.154] Module class: X.Org XInput Driver
[ 75634.154] ABI class: X.Org XInput driver, version 21.0
[ 75634.154] (II) wacom: Driver for Wacom graphics tablets: PenPartner, Graphire,
Graphire2 4x5, Graphire2 5x7, Graphire3 4x5, Graphire3 6x8,
Graphire4 4x5, Graphire4 6x8, BambooFun 4x5, BambooFun 6x8,
Bamboo1 Medium, Graphire4 6x8 BlueTooth, CTL-460, CTH-461, CTL-660,
CTL-461/S, Bamboo Touch, CTH-460/K, CTH-461/S, CTH-661/S1, CTH-461/L,
CTH-661/L, Intuos 4x5, Intuos 6x8, Intuos 9x12, Intuos 12x12,
Intuos 12x18, PTU600, PL400, PL500, PL600, PL600SX, PL550, PL800,
PL700, PL510, PL710, DTI520, DTF720, DTF720a, DTF521, DTU1931,
DTU2231, DTU1631, Intuos2 4x5, Intuos2 6x8, Intuos2 9x12,
Intuos2 12x12, Intuos2 12x18, Intuos2 6x8 , Volito, PenStation,
Volito2 4x5, Volito2 2x3, PenPartner2, Bamboo, Bamboo1, Bamboo1 4x6,
Bamboo1 5x8, Intuos3 4x5, Intuos3 6x8, Intuos3 9x12, Intuos3 12x12,
Intuos3 12x19, Intuos3 6x11, Intuos3 4x6, Intuos4 4x6, Intuos4 6x9,
Intuos4 8x13, Intuos4 12x19, Intuos4 WL USB Endpoint,
Intuos4 WL Bluetooth Endpoint, Intuos5 touch S, Intuos5 touch M,
Intuos5 touch L, Intuos5 S, Intuos5 M, Intuos Pro S, Intuos Pro M,
Intuos Pro L, Cintiq 21UX, Cintiq 20WSX, Cintiq 12WX, Cintiq 21UX2,
Cintiq 24HD, Cintiq 22HD, Cintiq 24HD touch (EMR digitizer),
Cintiq 13HD, DTK2241, DTH2242, Cintiq 22HDT, TabletPC 0x90,
TabletPC 0x93, TabletPC 0x97, TabletPC 0x9A, CapPlus 0x9F,
TabletPC 0xE2, TabletPC 0xE3, TabletPC 0xE5, TabletPC 0xE6,
TabletPC 0xEC, TabletPC 0xED, TabletPC 0xEF, TabletPC 0x100,
TabletPC 0x101, TabletPC 0x10D, TabletPC 0x116, TabletPC 0x12C,
TabletPC 0x4001, TabletPC 0x4004, TabletPC 0x5000, TabletPC 0x5002,
usb:172f:0024, usb:172f:0025, usb:172f:0026, usb:172f:0027,
usb:172f:0028, usb:172f:0030, usb:172f:0031, usb:172f:0032,
usb:172f:0033, usb:172f:0034, usb:172f:0035, usb:172f:0036,
usb:172f:0037, usb:172f:0038, usb:172f:0039, usb:172f:0051,
usb:172f:0052, usb:172f:0053, usb:172f:0054, usb:172f:0055,
usb:172f:0056, usb:172f:0057, usb:172f:0058, usb:172f:0500,
usb:172f:0501, usb:172f:0502, usb:172f:0503, usb:1b96:0001,
usb:17ef:6004
[ 75634.155] (II) Using input driver 'wacom' for 'Wacom Graphire2 4x5'
[ 75634.155] (**) Wacom Graphire2 4x5: always reports core events
[ 75634.155] (**) Option "Device" "/dev/input/event13"
[ 75634.156] (II) Wacom Graphire2 4x5: type not specified, assuming 'stylus'.
[ 75634.156] (II) Wacom Graphire2 4x5: other types will be automatically added.
[ 75634.156] (--) Wacom Graphire2 4x5 stylus: using pressure threshold of 27 for button 1
[ 75634.156] (--) Wacom Graphire2 4x5 stylus: maxX=10206 maxY=7422 maxZ=511 resX=80000 resY=80000 tilt=disabled
[ 75634.156] (II) Wacom Graphire2 4x5 stylus: hotplugging dependent devices.
[ 75634.156] (EE) Wacom Graphire2 4x5 stylus: Invalid type 'touch' for this device.
[ 75634.156] (EE) Wacom Graphire2 4x5 stylus: Invalid type 'pad' for this device.
[ 75634.156] (II) Wacom Graphire2 4x5 stylus: hotplugging completed.
[ 75634.188] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-4/5-4.4/5-4.4:1.0/input/input23/event13"
[ 75634.188] (II) XINPUT: Adding extended input device "Wacom Graphire2 4x5 stylus" (type: STYLUS, id 14)
[ 75634.188] (**) Wacom Graphire2 4x5 stylus: (accel) keeping acceleration scheme 1
[ 75634.188] (**) Wacom Graphire2 4x5 stylus: (accel) acceleration profile 0
[ 75634.189] (**) Wacom Graphire2 4x5 stylus: (accel) acceleration factor: 2.000
[ 75634.189] (**) Wacom Graphire2 4x5 stylus: (accel) acceleration threshold: 4
[ 75634.189] (II) config/udev: Adding input device Wacom Graphire2 4x5 (/dev/input/mouse1)
[ 75634.189] (II) No input driver specified, ignoring this device.
[ 75634.189] (II) This device may have been added with another device file.
[ 75634.190] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 75634.190] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 75634.190] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 75634.190] (**) AT Translated Set 2 keyboard: always reports core events
[ 75634.190] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 75634.191] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 75634.191] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 75634.191] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 75634.191] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 75634.191] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
[ 75634.191] (**) Option "xkb_rules" "evdev"
[ 75634.191] (**) Option "xkb_model" "pc105"
[ 75634.191] (**) Option "xkb_layout" "de"
[ 75634.191] (**) Option "xkb_variant" "nodeadkeys"
[ 75634.191] (**) Option "xkb_options" "lv3:ralt_switch,compose:caps,keypad:pointerkeys"
[ 75634.192] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5)
[ 75634.192] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 75634.192] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 75634.192] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 75634.192] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 75634.192] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 75634.192] (**) Option "Device" "/dev/input/event5"
[ 75634.236] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 69)
[ 75634.236] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 100)
[ 75634.236] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 75634.236] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 75634.236] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple scroll-buttons
[ 75634.236] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 75634.236] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 75634.236] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 75634.248] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input16/event5"
[ 75634.248] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 16)
[ 75634.248] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 75634.248] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 75634.248] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[ 75634.248] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 75634.248] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 75634.248] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 75634.248] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 75634.248] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 75634.249] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 75634.249] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 75634.250] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event16)
[ 75634.250] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[ 75634.250] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
[ 75634.250] (**) PS/2 Generic Mouse: always reports core events
[ 75634.250] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event16"
[ 75634.250] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1
[ 75634.250] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons
[ 75634.250] (--) evdev: PS/2 Generic Mouse: Found relative axes
[ 75634.250] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes
[ 75634.250] (II) evdev: PS/2 Generic Mouse: Configuring as mouse
[ 75634.250] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[ 75634.250] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 75634.250] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/serio5/input/input18/event16"
[ 75634.250] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 17)
[ 75634.250] (II) evdev: PS/2 Generic Mouse: initialized for relative axes.
[ 75634.251] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
[ 75634.251] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
[ 75634.251] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[ 75634.251] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[ 75634.251] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse2)
[ 75634.252] (II) No input driver specified, ignoring this device.
[ 75634.252] (II) This device may have been added with another device file.
[ 75634.260] (**) Wacom Graphire2 4x5 eraser: Applying InputClass "evdev tablet catchall"
[ 75634.260] (**) Wacom Graphire2 4x5 eraser: Applying InputClass "Wacom USB device class"
[ 75634.260] (**) Wacom Graphire2 4x5 eraser: Applying InputClass "Wacom class"
[ 75634.260] (II) Using input driver 'wacom' for 'Wacom Graphire2 4x5 eraser'
[ 75634.260] (**) Wacom Graphire2 4x5 eraser: always reports core events
[ 75634.260] (**) Option "Device" "/dev/input/event13"
[ 75634.260] (**) Option "Type" "eraser"
[ 75634.260] (--) Wacom Graphire2 4x5 eraser: maxX=10206 maxY=7422 maxZ=511 resX=80000 resY=80000 tilt=disabled
[ 75634.276] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-4/5-4.4/5-4.4:1.0/input/input23/event13"
[ 75634.276] (II) XINPUT: Adding extended input device "Wacom Graphire2 4x5 eraser" (type: ERASER, id 18)
[ 75634.276] (**) Wacom Graphire2 4x5 eraser: (accel) keeping acceleration scheme 1
[ 75634.276] (**) Wacom Graphire2 4x5 eraser: (accel) acceleration profile 0
[ 75634.276] (**) Wacom Graphire2 4x5 eraser: (accel) acceleration factor: 2.000
[ 75634.277] (**) Wacom Graphire2 4x5 eraser: (accel) acceleration threshold: 4
[ 75634.277] (**) Wacom Graphire2 4x5 cursor: Applying InputClass "evdev tablet catchall"
[ 75634.277] (**) Wacom Graphire2 4x5 cursor: Applying InputClass "Wacom USB device class"
[ 75634.277] (**) Wacom Graphire2 4x5 cursor: Applying InputClass "Wacom class"
[ 75634.277] (II) Using input driver 'wacom' for 'Wacom Graphire2 4x5 cursor'
[ 75634.277] (**) Wacom Graphire2 4x5 cursor: always reports core events
[ 75634.277] (**) Option "Device" "/dev/input/event13"
[ 75634.277] (**) Option "Type" "cursor"
[ 75634.316] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-4/5-4.4/5-4.4:1.0/input/input23/event13"
[ 75634.316] (II) XINPUT: Adding extended input device "Wacom Graphire2 4x5 cursor" (type: CURSOR, id 19)
[ 75634.316] (**) Wacom Graphire2 4x5 cursor: (accel) keeping acceleration scheme 1
[ 75634.316] (**) Wacom Graphire2 4x5 cursor: (accel) acceleration profile 0
[ 75634.317] (**) Wacom Graphire2 4x5 cursor: (accel) acceleration factor: 2.000
[ 75634.317] (**) Wacom Graphire2 4x5 cursor: (accel) acceleration threshold: 4
[ 75643.664] (II) intel(0): switch to mode 1280x1024@60.0 on DVI1 using pipe 0, position (0, 0), rotation left, reflection none
[ 75643.685] (II) intel(0): resizing framebuffer to 1024x1280
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
E: EV=3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=100000 0 0 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: USEC_INITIALIZED=842630
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event3
N: input/event3
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=366088
E: XKBLAYOUT=de
E: XKBMODEL=pc105
E: XKBOPTIONS=lv3:ralt_switch,compose:caps,keypad:pointerkeys
E: XKBVARIANT=nodeadkeys
P: /devices/LNXSYSTM:00/LNXSYBUS:00/FUJ02E3:00/input/input12
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/FUJ02E3:00/input/input12
E: EV=3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-FUJ02E3:00
E: ID_PATH_TAG=acpi-FUJ02E3_00
E: KEY=10000 c00 0 300000 0 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,k94,95,CA,CB,F0,ramlsfw
E: NAME="Fujitsu FUJ02E3"
E: PHYS="FUJ02E3/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: USEC_INITIALIZED=256787
P: /devices/LNXSYSTM:00/LNXSYBUS:00/FUJ02E3:00/input/input12/event8
N: input/event8
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/FUJ02E3:00/input/input12/event8
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-FUJ02E3:00
E: ID_PATH_TAG=acpi-FUJ02E3_00
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=373653
E: XKBLAYOUT=de
E: XKBMODEL=pc105
E: XKBOPTIONS=lv3:ralt_switch,compose:caps,keypad:pointerkeys
E: XKBVARIANT=nodeadkeys
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
E: EV=3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: KEY=3e000b 0 0 0 0 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: USEC_INITIALIZED=843012
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8/event4
N: input/event4
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8/event4
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=367625
E: XKBLAYOUT=de
E: XKBMODEL=pc105
E: XKBOPTIONS=lv3:ralt_switch,compose:caps,keypad:pointerkeys
E: XKBVARIANT=nodeadkeys
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/FUJ02B1:00/input/input11
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/FUJ02B1:00/input/input11
E: EV=3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-FUJ02B1:00
E: ID_PATH_TAG=acpi-FUJ02B1_00
E: KEY=10003 0 0 0 0 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,F0,ramlsfw
E: NAME="Fujitsu FUJ02B1"
E: PHYS="FUJ02B1/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: USEC_INITIALIZED=250511
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/FUJ02B1:00/input/input11/event7
N: input/event7
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/FUJ02B1:00/input/input11/event7
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-FUJ02B1:00
E: ID_PATH_TAG=acpi-FUJ02B1_00
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=372141
E: XKBLAYOUT=de
E: XKBMODEL=pc105
E: XKBOPTIONS=lv3:ralt_switch,compose:caps,keypad:pointerkeys
E: XKBVARIANT=nodeadkeys
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
E: EV=3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: KEY=100000 0 0 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: USEC_INITIALIZED=845335
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event2
N: input/event2
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event2
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=364588
E: XKBLAYOUT=de
E: XKBMODEL=pc105
E: XKBOPTIONS=lv3:ralt_switch,compose:caps,keypad:pointerkeys
E: XKBVARIANT=nodeadkeys
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
E: EV=21
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0,
E: NAME="Lid Switch"
E: PHYS="PNP0C0D/button/input0"
E: PRODUCT=19/0/5/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=1
E: USEC_INITIALIZED=845434
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4/event1
N: input/event1
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4/event1
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=362834
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input17
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input17
E: EV=40001
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0001v10ECp0262e0001-e0,12,kramls1,2,fw
E: NAME="HDA Digital PCBeep"
E: PHYS="card0/codec#0/beep0"
E: PRODUCT=1/10ec/262/1
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: USEC_INITIALIZED=460162
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input17/event6
N: input/event6
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input17/event6
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: USEC_INITIALIZED=460200
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input19
E: EV=21
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HDA Intel Dock Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: USEC_INITIALIZED=462769
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input19/event9
N: input/event9
E: DEVNAME=/dev/input/event9
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input19/event9
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: USEC_INITIALIZED=462839
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input20
E: EV=21
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HDA Intel Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: USEC_INITIALIZED=462943
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input20/event10
N: input/event10
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input20/event10
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: USEC_INITIALIZED=462997
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input21
E: EV=21
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HDA Intel Headphone"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: USEC_INITIALIZED=463105
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input21/event11
N: input/event11
E: DEVNAME=/dev/input/event11
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input21/event11
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=75
E: SUBSYSTEM=input
E: USEC_INITIALIZED=463156
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input22
E: EV=21
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HDA Intel Dock Headphone"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: USEC_INITIALIZED=463265
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input22/event12
N: input/event12
E: DEVNAME=/dev/input/event12
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input22/event12
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=76
E: SUBSYSTEM=input
E: USEC_INITIALIZED=463318
P: /devices/pci0000:00/0000:00:1d.7/usb5/5-4/5-4.2/5-4.2.1/5-4.2.1:1.0/0003:046D:C303.0003/input/input24
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb5/5-4/5-4.2/5-4.2.1/5-4.2.1:1.0/0003:046D:C303.0003/input/input24
E: EV=120013
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=USB_Keyboard
E: ID_MODEL_ENC=USB\x20Keyboard
E: ID_MODEL_ID=c303
E: ID_PATH=pci-0000:00:1d.7-usb-0:4.2.1:1.0
E: ID_PATH_TAG=pci-0000_00_1d_7-usb-0_4_2_1_1_0
E: ID_REVISION=0700
E: ID_SERIAL=Logitech_USB_Keyboard
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech\x20\x20\x20
E: ID_VENDOR_ID=046d
E: KEY=10000 7 ff800000 7ff febeffdf ffefffff ffffffff fffffffe
E: LED=7
E: MODALIAS=input:b0003v046DpC303e0110-e0,1,4,11,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,F0,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="Logitech USB Keyboard"
E: PHYS="usb-0000:00:1d.7-4.2.1/input0"
E: PRODUCT=3/46d/c303/110
E: PROP=0
E: SUBSYSTEM=input
E: UNIQ=""
E: USEC_INITIALIZED=987600
P: /devices/pci0000:00/0000:00:1d.7/usb5/5-4/5-4.2/5-4.2.1/5-4.2.1:1.0/0003:046D:C303.0003/input/input24/event14
N: input/event14
S: input/by-id/usb-Logitech_USB_Keyboard-event-kbd
S: input/by-path/pci-0000:00:1d.7-usb-0:4.2.1:1.0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Keyboard-event-kbd /dev/input/by-path/pci-0000:00:1d.7-usb-0:4.2.1:1.0-event-kbd
E: DEVNAME=/dev/input/event14
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb5/5-4/5-4.2/5-4.2.1/5-4.2.1:1.0/0003:046D:C303.0003/input/input24/event14
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=USB_Keyboard
E: ID_MODEL_ENC=USB\x20Keyboard
E: ID_MODEL_ID=c303
E: ID_PATH=pci-0000:00:1d.7-usb-0:4.2.1:1.0
E: ID_PATH_TAG=pci-0000_00_1d_7-usb-0_4_2_1_1_0
E: ID_REVISION=0700
E: ID_SERIAL=Logitech_USB_Keyboard
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech\x20\x20\x20
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=78
E: SUBSYSTEM=input
E: USEC_INITIALIZED=987748
E: XKBLAYOUT=de
E: XKBMODEL=pc105
E: XKBOPTIONS=lv3:ralt_switch,compose:caps,keypad:pointerkeys
E: XKBVARIANT=nodeadkeys
P: /devices/pci0000:00/0000:00:1d.7/usb5/5-4/5-4.2/5-4.2.1/5-4.2.1:1.1/0003:046D:C303.0004/input/input25
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb5/5-4/5-4.2/5-4.2.1/5-4.2.1:1.1/0003:046D:C303.0004/input/input25
E: EV=13
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=USB_Keyboard
E: ID_MODEL_ENC=USB\x20Keyboard
E: ID_MODEL_ID=c303
E: ID_PATH=pci-0000:00:1d.7-usb-0:4.2.1:1.1
E: ID_PATH_TAG=pci-0000_00_1d_7-usb-0_4_2_1_1_1
E: ID_REVISION=0700
E: ID_SERIAL=Logitech_USB_Keyboard
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech\x20\x20\x20
E: ID_VENDOR_ID=046d
E: KEY=2000000 1078 1800d000 1e0000 0 0 0
E: MODALIAS=input:b0003v046DpC303e0110-e0,1,4,k71,72,73,74,8C,8E,8F,9B,9C,A3,A4,A5,A6,AC,D9,ram4,lsfw
E: MSC=10
E: NAME="Logitech USB Keyboard"
E: PHYS="usb-0000:00:1d.7-4.2.1/input1"
E: PRODUCT=3/46d/c303/110
E: PROP=0
E: SUBSYSTEM=input
E: UNIQ=""
E: USEC_INITIALIZED=996549
P: /devices/pci0000:00/0000:00:1d.7/usb5/5-4/5-4.2/5-4.2.1/5-4.2.1:1.1/0003:046D:C303.0004/input/input25/event15
N: input/event15
S: input/by-id/usb-Logitech_USB_Keyboard-event-if01
S: input/by-path/pci-0000:00:1d.7-usb-0:4.2.1:1.1-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Keyboard-event-if01 /dev/input/by-path/pci-0000:00:1d.7-usb-0:4.2.1:1.1-event
E: DEVNAME=/dev/input/event15
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb5/5-4/5-4.2/5-4.2.1/5-4.2.1:1.1/0003:046D:C303.0004/input/input25/event15
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=USB_Keyboard
E: ID_MODEL_ENC=USB\x20Keyboard
E: ID_MODEL_ID=c303
E: ID_PATH=pci-0000:00:1d.7-usb-0:4.2.1:1.1
E: ID_PATH_TAG=pci-0000_00_1d_7-usb-0_4_2_1_1_1
E: ID_REVISION=0700
E: ID_SERIAL=Logitech_USB_Keyboard
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech\x20\x20\x20
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=79
E: SUBSYSTEM=input
E: USEC_INITIALIZED=996651
E: XKBLAYOUT=de
E: XKBMODEL=pc105
E: XKBOPTIONS=lv3:ralt_switch,compose:caps,keypad:pointerkeys
E: XKBVARIANT=nodeadkeys
P: /devices/pci0000:00/0000:00:1d.7/usb5/5-4/5-4.4/5-4.4:1.0/input/input23
E: ABS=100 1000003
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb5/5-4/5-4.4/5-4.4:1.0/input/input23
E: EV=f
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_TABLET=1
E: ID_MODEL=ET-0405A-UV2.0-3
E: ID_MODEL_ENC=ET-0405A-UV2.0-3
E: ID_MODEL_ID=0011
E: ID_PATH=pci-0000:00:1d.7-usb-0:4.4:1.0
E: ID_PATH_TAG=pci-0000_00_1d_7-usb-0_4_4_1_0
E: ID_REVISION=0203
E: ID_SERIAL=WACOM_ET-0405A-UV2.0-3
E: ID_TYPE=hid
E: ID_USB_DRIVER=wacom
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=WACOM
E: ID_VENDOR_ENC=WACOM
E: ID_VENDOR_ID=056a
E: KEY=1c43 0 70000 0 0 0 0 0 0 0 0
E: MODALIAS=input:b0003v056Ap0011e0203-e0,1,2,3,k110,111,112,140,141,146,14A,14B,14C,r8,a0,1,18,28,mlsfw
E: NAME="Wacom Graphire2 4x5"
E: PRODUCT=3/56a/11/203
E: PROP=1
E: REL=100
E: SUBSYSTEM=input
E: USEC_INITIALIZED=805823
P: /devices/pci0000:00/0000:00:1d.7/usb5/5-4/5-4.4/5-4.4:1.0/input/input23/event13
N: input/event13
S: input/by-id/usb-WACOM_ET-0405A-UV2.0-3-event-mouse
S: input/by-path/pci-0000:00:1d.7-usb-0:4.4:1.0-event-mouse
E: DEVLINKS=/dev/input/by-id/usb-WACOM_ET-0405A-UV2.0-3-event-mouse /dev/input/by-path/pci-0000:00:1d.7-usb-0:4.4:1.0-event-mouse
E: DEVNAME=/dev/input/event13
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb5/5-4/5-4.4/5-4.4:1.0/input/input23/event13
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_TABLET=1
E: ID_MODEL=ET-0405A-UV2.0-3
E: ID_MODEL_ENC=ET-0405A-UV2.0-3
E: ID_MODEL_ID=0011
E: ID_PATH=pci-0000:00:1d.7-usb-0:4.4:1.0
E: ID_PATH_TAG=pci-0000_00_1d_7-usb-0_4_4_1_0
E: ID_REVISION=0203
E: ID_SERIAL=WACOM_ET-0405A-UV2.0-3
E: ID_TYPE=hid
E: ID_USB_DRIVER=wacom
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=WACOM
E: ID_VENDOR_ENC=WACOM
E: ID_VENDOR_ID=056a
E: MAJOR=13
E: MINOR=77
E: SUBSYSTEM=input
E: USEC_INITIALIZED=805993
P: /devices/pci0000:00/0000:00:1d.7/usb5/5-4/5-4.4/5-4.4:1.0/input/input23/mouse1
N: input/mouse1
S: input/by-id/usb-WACOM_ET-0405A-UV2.0-3-mouse
S: input/by-path/pci-0000:00:1d.7-usb-0:4.4:1.0-mouse
E: DEVLINKS=/dev/input/by-id/usb-WACOM_ET-0405A-UV2.0-3-mouse /dev/input/by-path/pci-0000:00:1d.7-usb-0:4.4:1.0-mouse
E: DEVNAME=/dev/input/mouse1
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb5/5-4/5-4.4/5-4.4:1.0/input/input23/mouse1
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_TABLET=1
E: ID_MODEL=ET-0405A-UV2.0-3
E: ID_MODEL_ENC=ET-0405A-UV2.0-3
E: ID_MODEL_ID=0011
E: ID_PATH=pci-0000:00:1d.7-usb-0:4.4:1.0
E: ID_PATH_TAG=pci-0000_00_1d_7-usb-0_4_4_1_0
E: ID_REVISION=0203
E: ID_SERIAL=WACOM_ET-0405A-UV2.0-3
E: ID_TYPE=hid
E: ID_USB_DRIVER=wacom
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=WACOM
E: ID_VENDOR_ENC=WACOM
E: ID_VENDOR_ID=056a
E: MAJOR=13
E: MINOR=33
E: SUBSYSTEM=input
E: USEC_INITIALIZED=805921
P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEY=4 2000000 3803078 f800d001 feffffdf ffefffff ffffffff fffffffe
E: LED=7
E: MODALIAS=input:b0011v0001p0001eAB54-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab54
E: PROP=0
E: SUBSYSTEM=input
E: USEC_INITIALIZED=865766
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: USEC_INITIALIZED=360435
E: XKBLAYOUT=de
E: XKBMODEL=pc105
E: XKBOPTIONS=lv3:ralt_switch,compose:caps,keypad:pointerkeys
E: XKBVARIANT=nodeadkeys
P: /devices/platform/i8042/serio4/input/input16
E: ABS=11000003
E: DEVPATH=/devices/platform/i8042/serio4/input/input16
E: EV=b
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-4
E: ID_PATH_TAG=platform-i8042-serio-4
E: ID_SERIAL=noserial
E: KEY=6420 0 30003 0 0 0 0 0 0 0 0
E: MODALIAS=input:b0011v0002p0007e01B1-e0,1,3,k100,101,110,111,145,14A,14D,14E,ra0,1,18,1C,mlsfw
E: NAME="SynPS/2 Synaptics TouchPad"
E: PHYS="isa0060/serio4/input0"
E: PRODUCT=11/2/7/1b1
E: PROP=1
E: SUBSYSTEM=input
E: USEC_INITIALIZED=437887
P: /devices/platform/i8042/serio4/input/input16/event5
N: input/event5
S: input/by-path/platform-i8042-serio-4-event-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-4-event-mouse
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/platform/i8042/serio4/input/input16/event5
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-4
E: ID_PATH_TAG=platform-i8042-serio-4
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: USEC_INITIALIZED=439720
P: /devices/platform/i8042/serio4/input/input16/mouse0
N: input/mouse0
S: input/by-path/platform-i8042-serio-4-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-4-mouse
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/platform/i8042/serio4/input/input16/mouse0
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-4
E: ID_PATH_TAG=platform-i8042-serio-4
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=438862
P: /devices/platform/i8042/serio4/serio5/input/input18
E: DEVPATH=/devices/platform/i8042/serio4/serio5/input/input18
E: EV=7
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_PATH=platform-i8042-serio-5
E: ID_PATH_TAG=platform-i8042-serio-5
E: ID_SERIAL=noserial
E: KEY=70000 0 0 0 0 0 0 0 0
E: MODALIAS=input:b0011v0002p0001e0000-e0,1,2,k110,111,112,r0,1,amlsfw
E: NAME="PS/2 Generic Mouse"
E: PHYS="synaptics-pt/serio0/input0"
E: PRODUCT=11/2/1/0
E: PROP=0
E: REL=3
E: SUBSYSTEM=input
E: USEC_INITIALIZED=686124
P: /devices/platform/i8042/serio4/serio5/input/input18/event16
N: input/event16
S: input/by-path/platform-i8042-serio-5-event-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-5-event-mouse
E: DEVNAME=/dev/input/event16
E: DEVPATH=/devices/platform/i8042/serio4/serio5/input/input18/event16
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_PATH=platform-i8042-serio-5
E: ID_PATH_TAG=platform-i8042-serio-5
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=80
E: SUBSYSTEM=input
E: USEC_INITIALIZED=686398
P: /devices/platform/i8042/serio4/serio5/input/input18/mouse2
N: input/mouse2
S: input/by-path/platform-i8042-serio-5-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-5-mouse
E: DEVNAME=/dev/input/mouse2
E: DEVPATH=/devices/platform/i8042/serio4/serio5/input/input18/mouse2
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_PATH=platform-i8042-serio-5
E: ID_PATH_TAG=platform-i8042-serio-5
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=34
E: SUBSYSTEM=input
E: USEC_INITIALIZED=686347
Reply to: