Bug#622401: xserver-xorg-video-trident: Error message and exit with iceape and iceweasel
Package: xserver-xorg-video-trident
Version: 1:1.3.4-2
Severity: important
*** Please type your report below this line ***
If "iceweasel" or "iceape" are used, there is an error message
and exit.
(EE) TRIDENT(0): Unable to map IO aperture. Invalid argument (22)
Fatal server error:
AddScreen/ScreenInit failed for driver 0
...
Error: cannot open display: :0
This does not happen with "simpler" programs like "xdpf", "gv"
and a game "ace-of-penguins" suite (like "ace-canfield").
The name of the issuer (subroutine) of the error messages is
missing. See "gnu_coding_standards.*" in www.gnu.org/
-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Jun 30 2009 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1783236 Mar 26 07:55 /usr/bin/Xorg
VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Trident Microsystems TGUI 9660/938x/968x [1023:9660] (rev d3)
Xorg X server configuration file status:
----------------------------------------
-rw-r--r-- 1 root root 2712 Apr 12 15:22 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
-------------------------------
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/fonts/X11/misc,/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1,/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
# FontPath "built-ins"
EndSection
Section "ServerFlags"
Option "DefaultServerLayout" "laptop"
# Option "AIGLX" "no"
# Option "GLX" "no"
Option "UseDefaultFontPath" "no"
EndSection
Section "InputClass"
Identifier "evdev pointer catchall"
MatchIsPointer "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "Module"
# Disable "dri"
# Disable "dri2"
# Disable "glx"
# Load "glx"
Load "evdev"
EndSection
Section "Device"
Identifier "Configured Video Device"
# Identifier "Trident Microsystems TGUI 9660/938x/968x"
Driver "trident"
# Driver "vesa"
BusID "PCI:0:2:0"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
HorizSync 38-40
VertRefresh 57-63
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
# Device "Trident Microsystems TGUI 9660/938x/968x"
Monitor "Configured Monitor"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 4
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 8
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 15
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 16
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 24
Modes "800x600"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "laptop"
Screen "Default Screen"
# InputDevice "Generic Keyboard" "CoreKeyboard"
# InputDevice "Configured Mouse" "CorePointer"
# InputDevice "Serial Mouse" "SendCoreEvents"
# InputDevice "Synaptics Touchpad"
# InputDevice "USB-mouse" "CorePointer"
EndSection
Section "ServerLayout"
Identifier "mouse"
Screen "Default Screen"
# InputDevice "Generic Keyboard"
# InputDevice "Serial Mouse" "CorePointer"
# InputDevice "USB-Mouse" "CorePointer"
# InputDevice "Synaptics Touchpad"
EndSection
/etc/X11/xorg.conf.d does not exist.
/etc/modprobe.d contains no KMS configuration files.
Kernel version (/proc/version):
-------------------------------
Linux version 2.6.32-33 (2.6.32) (root@jeti.jeti.is) (gcc version 4.4.5 (Debian 4.4.5-8) ) #2 Sun Apr 10 01:31:11 GMT 2011
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 23997 Apr 12 15:24 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 5775.949] _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
[ 5775.950] _XSERVTransOpen: transport open failed for inet6/jeti.jeti.is:0
[ 5775.950] _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
[ 5775.960]
X.Org X Server 1.9.5
Release Date: 2011-03-17
[ 5775.961] X Protocol Version 11, Revision 0
[ 5775.961] Build Operating System: Linux 2.6.32-5-amd64 i686 Debian
[ 5775.961] Current Operating System: Linux jeti.jeti.is 2.6.32-33 #2 Sun Apr 10 01:31:11 GMT 2011 i586
[ 5775.962] Kernel command line: auto BOOT_IMAGE=linux26.32-33 ro root=303 vt.default_utf8=0
[ 5775.963] Build Date: 26 March 2011 07:50:38AM
[ 5775.963] xorg-server 2:1.9.5-1 (Cyril Brulebois <kibi@debian.org>)
[ 5775.963] Current version of pixman: 0.21.4
[ 5775.964] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 5775.964] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 5775.967] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 11 23:24:50 2011
[ 5775.968] (==) Using config file: "/etc/X11/xorg.conf"
[ 5775.969] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 5775.972] (**) Option "defaultserverlayout" "laptop"
[ 5775.972] (**) ServerLayout "laptop"
[ 5775.972] (**) |-->Screen "Default Screen" (0)
[ 5775.972] (**) | |-->Monitor "Configured Monitor"
[ 5775.976] (**) | |-->Device "Configured Video Device"
[ 5775.976] (**) Option "UseDefaultFontPath" "no"
[ 5775.977] (==) Automatically adding devices
[ 5775.977] (==) Automatically enabling devices
[ 5775.978] (**) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
[ 5775.978] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 5775.978] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 5775.978] (II) Loader magic: 0x81f9f60
[ 5775.978] (II) Module ABI versions:
[ 5775.978] X.Org ANSI C Emulation: 0.4
[ 5775.978] X.Org Video Driver: 8.0
[ 5775.978] X.Org XInput driver : 11.0
[ 5775.979] X.Org Server Extension : 4.0
[ 5775.983] (--) PCI:*(0:0:2:0) 1023:9660:0000:0000 rev 211, Mem @ 0xfdc00000/4194304, 0xfe7f0000/65536, 0xfe000000/4194304, BIOS @ 0x????????/65536
[ 5775.984] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 5775.984] (II) "extmod" will be loaded by default.
[ 5775.984] (II) "dbe" will be loaded by default.
[ 5775.984] (II) "glx" will be loaded by default.
[ 5775.984] (II) "record" will be loaded by default.
[ 5775.984] (II) "dri" will be loaded by default.
[ 5775.984] (II) "dri2" will be loaded by default.
[ 5775.985] (II) LoadModule: "evdev"
[ 5775.988] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 5775.990] (II) Module evdev: vendor="X.Org Foundation"
[ 5775.990] compiled for 1.9.4, module version = 2.6.0
[ 5775.990] Module class: X.Org XInput Driver
[ 5775.990] ABI class: X.Org XInput driver, version 11.0
[ 5775.990] (II) LoadModule: "extmod"
[ 5775.991] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 5775.995] (II) Module extmod: vendor="X.Org Foundation"
[ 5775.995] compiled for 1.9.5, module version = 1.0.0
[ 5775.995] Module class: X.Org Server Extension
[ 5775.995] ABI class: X.Org Server Extension, version 4.0
[ 5775.995] (II) Loading extension SELinux
[ 5775.995] (II) Loading extension MIT-SCREEN-SAVER
[ 5775.996] (II) Loading extension XFree86-VidModeExtension
[ 5775.996] (II) Loading extension XFree86-DGA
[ 5775.996] (II) Loading extension DPMS
[ 5775.996] (II) Loading extension XVideo
[ 5775.996] (II) Loading extension XVideo-MotionCompensation
[ 5775.996] (II) Loading extension X-Resource
[ 5775.996] (II) LoadModule: "dbe"
[ 5775.997] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 5775.998] (II) Module dbe: vendor="X.Org Foundation"
[ 5775.999] compiled for 1.9.5, module version = 1.0.0
[ 5775.999] Module class: X.Org Server Extension
[ 5775.999] ABI class: X.Org Server Extension, version 4.0
[ 5775.999] (II) Loading extension DOUBLE-BUFFER
[ 5775.999] (II) LoadModule: "glx"
[ 5776.000] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 5776.002] (II) Module glx: vendor="X.Org Foundation"
[ 5776.002] compiled for 1.9.5, module version = 1.0.0
[ 5776.002] ABI class: X.Org Server Extension, version 4.0
[ 5776.002] (==) AIGLX enabled
[ 5776.002] (II) Loading extension GLX
[ 5776.003] (II) LoadModule: "record"
[ 5776.003] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 5776.005] (II) Module record: vendor="X.Org Foundation"
[ 5776.005] compiled for 1.9.5, module version = 1.13.0
[ 5776.005] Module class: X.Org Server Extension
[ 5776.005] ABI class: X.Org Server Extension, version 4.0
[ 5776.005] (II) Loading extension RECORD
[ 5776.005] (II) LoadModule: "dri"
[ 5776.006] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 5776.008] (II) Module dri: vendor="X.Org Foundation"
[ 5776.009] compiled for 1.9.5, module version = 1.0.0
[ 5776.009] ABI class: X.Org Server Extension, version 4.0
[ 5776.009] (II) Loading extension XFree86-DRI
[ 5776.009] (II) LoadModule: "dri2"
[ 5776.010] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 5776.011] (II) Module dri2: vendor="X.Org Foundation"
[ 5776.011] compiled for 1.9.5, module version = 1.2.0
[ 5776.011] ABI class: X.Org Server Extension, version 4.0
[ 5776.012] (II) Loading extension DRI2
[ 5776.012] (II) LoadModule: "trident"
[ 5776.013] (II) Loading /usr/lib/xorg/modules/drivers/trident_drv.so
[ 5776.015] (II) Module trident: vendor="X.Org Foundation"
[ 5776.015] compiled for 1.9.4, module version = 1.3.4
[ 5776.015] Module class: X.Org Video Driver
[ 5776.015] ABI class: X.Org Video Driver, version 8.0
[ 5776.015] (II) TRIDENT: driver for Trident chipsets: tvga9000, tvga9000i, tvga8900c,
tvga8900d, tvga9200cxr, tgui9400cxi, cyber9320, cyber9388, cyber9397,
cyber9397dvd, cyber9520, cyber9525dvd, cyberblade/e4, tgui9420dgi,
tgui9440agi, tgui9660, tgui9680, providia9682, providia9685,
cyber9382, cyber9385, 3dimage975, 3dimage985, blade3d, cyberbladei7,
cyberbladei7d, cyberbladei1, cyberbladei1d, cyberbladeAi1,
cyberbladeAi1d, bladeXP, cyberbladeXPAi1, cyberbladeXP4, XP5
[ 5776.018] (--) using VT number 4
[ 5776.025] (WW) Falling back to old probe method for trident
[ 5776.025] (--) Chipset tgui9660 found
[ 5776.026] (**) TRIDENT(0): Depth 16, (--) framebuffer bpp 16
[ 5776.026] (II) Loading sub module "vgahw"
[ 5776.026] (II) LoadModule: "vgahw"
[ 5776.028] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 5776.029] (II) Module vgahw: vendor="X.Org Foundation"
[ 5776.029] compiled for 1.9.5, module version = 0.1.0
[ 5776.029] ABI class: X.Org Video Driver, version 8.0
[ 5776.030] (II) TRIDENT(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
[ 5776.030] (II) Loading sub module "ramdac"
[ 5776.030] (II) LoadModule: "ramdac"
[ 5776.030] (II) Module "ramdac" already built-in
[ 5776.030] (==) TRIDENT(0): RGB weight 565
[ 5776.031] (==) TRIDENT(0): Default visual is TrueColor
[ 5776.031] (==) TRIDENT(0): Using gamma correction (1.0, 1.0, 1.0)
[ 5776.031] (==) TRIDENT(0): Using XAA for acceleration
[ 5776.031] (==) TRIDENT(0): Linear framebuffer at 0xFDC00000
[ 5776.031] (--) TRIDENT(0): IO registers at 0xFE7F0000
[ 5776.031] (II) Loading sub module "vbe"
[ 5776.032] (II) LoadModule: "vbe"
[ 5776.033] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 5776.034] (II) Module vbe: vendor="X.Org Foundation"
[ 5776.034] compiled for 1.9.5, module version = 1.1.0
[ 5776.034] ABI class: X.Org Video Driver, version 8.0
[ 5776.034] (II) Loading sub module "int10"
[ 5776.034] (II) LoadModule: "int10"
[ 5776.035] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 5776.037] (II) Module int10: vendor="X.Org Foundation"
[ 5776.037] compiled for 1.9.5, module version = 1.0.0
[ 5776.037] ABI class: X.Org Video Driver, version 8.0
[ 5776.038] (II) TRIDENT(0): initializing int10
[ 5776.055] (II) TRIDENT(0): Bad V_BIOS checksum
[ 5776.055] (II) TRIDENT(0): Primary V_BIOS segment is: 0xc000
[ 5776.057] (II) TRIDENT(0): VESA BIOS detected
[ 5776.057] (II) TRIDENT(0): VESA VBE Version 1.2
[ 5776.057] (II) TRIDENT(0): VESA VBE Total Mem: 1664 kB
[ 5776.057] (II) TRIDENT(0): VESA VBE OEM: Copyright 1994 TRIDENT MICROSYSTEMS INC.
[ 5776.058] (--) TRIDENT(0): Revision is 53
[ 5776.059] (--) TRIDENT(0): Found Cyber 9385 chip
[ 5776.059] (--) TRIDENT(0): RAM type is EDO Ram
[ 5776.059] (--) TRIDENT(0): Using HW cursor
[ 5776.059] (--) TRIDENT(0): VideoRAM: 2048 kByte
[ 5776.059] (--) TRIDENT(0): DSTN Panel 800x600 found
[ 5776.059] (--) TRIDENT(0): Memory Clock is 65.97 MHz
[ 5776.059] (==) TRIDENT(0): Min pixel clock is 12 MHz
[ 5776.059] (--) TRIDENT(0): Max pixel clock is 170 MHz
[ 5776.060] (II) TRIDENT(0): Configured Monitor: Using hsync range of 38.00-40.00 kHz
[ 5776.060] (II) TRIDENT(0): Configured Monitor: Using vrefresh range of 57.00-63.00 Hz
[ 5776.060] (II) TRIDENT(0): Clock range: 12.00 to 170.00 MHz
[ 5776.060] (II) TRIDENT(0): Not using default mode "640x350" (vrefresh out of range)
( Lines for different modes removed)
[ 5776.079] (II) TRIDENT(0): Not using default mode "2048x1536" (insufficient memory for mode)
[ 5776.079] (II) TRIDENT(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
[ 5776.079] (--) TRIDENT(0): Virtual size is 800x600 (pitch 1024)
[ 5776.080] (**) TRIDENT(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
[ 5776.080] (II) TRIDENT(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 5776.080] (**) TRIDENT(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
[ 5776.080] (II) TRIDENT(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz)
[ 5776.080] (==) TRIDENT(0): DPI set to (96, 96)
[ 5776.080] (II) Loading sub module "fb"
[ 5776.081] (II) LoadModule: "fb"
[ 5776.082] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 5776.086] (II) Module fb: vendor="X.Org Foundation"
[ 5776.086] compiled for 1.9.5, module version = 1.0.0
[ 5776.086] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5776.086] (II) Loading sub module "i2c"
[ 5776.086] (II) LoadModule: "i2c"
[ 5776.086] (II) Module "i2c" already built-in
[ 5776.086] (II) Loading sub module "xaa"
[ 5776.086] (II) LoadModule: "xaa"
[ 5776.087] (II) Loading /usr/lib/xorg/modules/libxaa.so
[ 5776.093] (II) Module xaa: vendor="X.Org Foundation"
[ 5776.093] compiled for 1.9.5, module version = 1.2.1
[ 5776.093] ABI class: X.Org Video Driver, version 8.0
[ 5776.093] (II) Loading sub module "ddc"
[ 5776.093] (II) LoadModule: "ddc"
[ 5776.093] (II) Module "ddc" already built-in
[ 5776.096] (II) Loading sub module "int10"
[ 5776.096] (II) LoadModule: "int10"
[ 5776.097] (II) Reloading /usr/lib/xorg/modules/libint10.so
[ 5776.097] (II) TRIDENT(0): Initializing int10
[ 5776.114] (II) TRIDENT(0): Bad V_BIOS checksum
[ 5776.114] (II) TRIDENT(0): Primary V_BIOS segment is: 0xc000
[ 5776.211] (II) TRIDENT(0): Overriding Horizontal timings.
[ 5776.211] (II) TRIDENT(0): Shadow off
[ 5776.211] (II) TRIDENT(0): H-timing shadow registers: 0x7f 0x00 0x69 0x7f
[ 5776.211] (II) TRIDENT(0): H-timing registers: 0x7f 0x63 0x63 0x00 0x69 0x7f
[ 5776.211] (II) TRIDENT(0): V-timing shadow registers: 0x72 0xf0 0x59 0x0d 0x00 (0x08)
[ 5776.212] (II) TRIDENT(0): V-timing registers: 0x72 0xf0 0x59 0x0d 0x57 0x00 0x00
[ 5776.212] (II) TRIDENT(0): Setting BIOS Mode: 77 for: 800x600
[ 5776.217] (II) TRIDENT(0): Found Clock 40.00 n=249 m=21 k=2
[ 5776.219] (II) TRIDENT(0): Using 424 scanlines of offscreen memory for area's
[ 5776.220] (II) TRIDENT(0): Using XFree86 Acceleration Architecture (XAA)
[ 5776.220] Screen to screen bit blits
[ 5776.220] Solid filled rectangles
[ 5776.220] 8x8 mono pattern filled rectangles
[ 5776.220] Solid Lines
[ 5776.220] Dashed Lines
[ 5776.221] Setting up tile and stipple cache:
[ 5776.221] 28 128x128 slots
[ 5776.222] 32 8x8 color expansion slots
[ 5776.222] (==) TRIDENT(0): Backing store disabled
[ 5776.222] (==) TRIDENT(0): Silken mouse enabled
[ 5776.225] (==) TRIDENT(0): DPMS enabled
[ 5776.244] (==) RandR enabled
[ 5776.245] (II) Initializing built-in extension Generic Event Extension
[ 5776.245] (II) Initializing built-in extension SHAPE
[ 5776.245] (II) Initializing built-in extension MIT-SHM
[ 5776.245] (II) Initializing built-in extension XInputExtension
[ 5776.245] (II) Initializing built-in extension XTEST
[ 5776.245] (II) Initializing built-in extension BIG-REQUESTS
[ 5776.245] (II) Initializing built-in extension SYNC
[ 5776.245] (II) Initializing built-in extension XKEYBOARD
[ 5776.245] (II) Initializing built-in extension XC-MISC
[ 5776.245] (II) Initializing built-in extension SECURITY
[ 5776.246] (II) Initializing built-in extension XINERAMA
[ 5776.246] (II) Initializing built-in extension XFIXES
[ 5776.246] (II) Initializing built-in extension RENDER
[ 5776.246] (II) Initializing built-in extension RANDR
[ 5776.246] (II) Initializing built-in extension COMPOSITE
[ 5776.246] (II) Initializing built-in extension DAMAGE
[ 5776.247] (II) SELinux: Disabled on system
[ 5776.361] (II) AIGLX: Screen 0 is not DRI2 capable
[ 5776.362] (II) AIGLX: Screen 0 is not DRI capable
[ 5776.391] (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
[ 5776.391] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 5777.045] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event3)
[ 5777.045] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 5777.045] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 5777.046] (**) Logitech USB Optical Mouse: always reports core events
[ 5777.046] (**) Logitech USB Optical Mouse: Device: "/dev/input/event3"
[ 5777.047] (--) Logitech USB Optical Mouse: Found 12 mouse buttons
[ 5777.047] (--) Logitech USB Optical Mouse: Found scroll wheel(s)
[ 5777.047] (--) Logitech USB Optical Mouse: Found relative axes
[ 5777.047] (--) Logitech USB Optical Mouse: Found x and y relative axes
[ 5777.047] (II) Logitech USB Optical Mouse: Configuring as mouse
[ 5777.047] (II) Logitech USB Optical Mouse: Adding scrollwheel support
[ 5777.047] (**) Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 5777.048] (**) Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 5777.048] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE)
[ 5777.049] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 5777.049] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 5777.050] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 5777.050] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 5777.050] (II) Logitech USB Optical Mouse: initialized for relative axes.
[ 5777.054] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse1)
[ 5777.055] (II) No input driver/identifier specified (ignoring)
[ 5777.068] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event1)
[ 5777.069] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 5777.069] (**) AT Translated Set 2 keyboard: always reports core events
[ 5777.069] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
[ 5777.070] (--) AT Translated Set 2 keyboard: Found keys
[ 5777.070] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 5777.070] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 5777.070] (**) Option "xkb_rules" "evdev"
[ 5777.070] (**) Option "xkb_model" "pc105"
[ 5777.070] (**) Option "xkb_layout" "is"
[ 5777.071] (**) Option "xkb_options" "compose:menu"
[ 5777.391] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event2)
[ 5777.391] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 5777.392] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 5777.392] (**) SynPS/2 Synaptics TouchPad: Device: "/dev/input/event2"
[ 5777.392] (--) SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
[ 5777.393] (--) SynPS/2 Synaptics TouchPad: Found absolute axes
[ 5777.393] (--) SynPS/2 Synaptics TouchPad: Found x and y absolute axes
[ 5777.393] (--) SynPS/2 Synaptics TouchPad: Found absolute touchpad.
[ 5777.393] (II) SynPS/2 Synaptics TouchPad: Configuring as touchpad
[ 5777.393] (**) SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
[ 5777.393] (**) SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 5777.394] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 5777.394] (II) SynPS/2 Synaptics TouchPad: initialized for absolute axes.
[ 5777.398] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 5777.399] (II) No input driver/identifier specified (ignoring)
[ 5777.403] (II) config/udev: Adding input device PC Speaker (/dev/input/event0)
[ 5777.403] (II) No input driver/identifier specified (ignoring)
[ 5838.216] (II) SynPS/2 Synaptics TouchPad: Close
[ 5838.217] (II) UnloadModule: "evdev"
[ 5838.217] (II) AT Translated Set 2 keyboard: Close
[ 5838.217] (II) UnloadModule: "evdev"
[ 5838.217] (II) Logitech USB Optical Mouse: Close
[ 5838.220] (II) UnloadModule: "evdev"
[ 5838.231] 1 XSELINUXs still allocated at reset
[ 5838.231] SCREEN: 0 objects of 136 bytes = 0 total bytes 0 private allocs
[ 5838.232] COLORMAP: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[ 5838.232] DEVICE: 0 objects of 16 bytes = 0 total bytes 0 private allocs
[ 5838.233] CLIENT: 0 objects of 160 bytes = 0 total bytes 0 private allocs
[ 5838.233] WINDOW: 0 objects of 32 bytes = 0 total bytes 0 private allocs
[ 5838.233] PIXMAP: 1 objects of 40 bytes = 40 total bytes 0 private allocs
[ 5838.234] GC: 0 objects of 92 bytes = 0 total bytes 0 private allocs
[ 5838.234] CURSOR: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[ 5838.234] CURSOR_BITS: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[ 5838.235] DBE_WINDOW: 0 objects of 12 bytes = 0 total bytes 0 private allocs
[ 5838.235] PICTURE: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[ 5838.235] TOTAL: 1 objects, 40 bytes, 0 allocs
[ 5838.236] 1 PIXMAPs still allocated at reset
[ 5838.236] PIXMAP: 1 objects of 40 bytes = 40 total bytes 0 private allocs
[ 5838.236] GC: 0 objects of 92 bytes = 0 total bytes 0 private allocs
[ 5838.237] CURSOR: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[ 5838.237] CURSOR_BITS: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[ 5838.238] DBE_WINDOW: 0 objects of 12 bytes = 0 total bytes 0 private allocs
[ 5838.238] PICTURE: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[ 5838.238] TOTAL: 1 objects, 40 bytes, 0 allocs
[ 5838.252] (EE) TRIDENT(0): Unable to map IO aperture. Invalid argument (22)
[ 5838.253]
Fatal server error:
[ 5838.253] AddScreen/ScreenInit failed for driver 0
[ 5838.253]
[ 5838.253]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 5838.253] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 5838.253]
udev information:
-----------------
P: /devices/platform/i8042/serio0/input/input1/event1
N: input/event1
S: input/by-path/platform-i8042-serio-0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio0/input/input1/event1
E: MAJOR=13
E: MINOR=65
E: DEVNAME=/dev/input/event1
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: XKBMODEL=pc105
E: XKBLAYOUT=is
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: XKBOPTIONS=compose:menu
E: DMI_VENDOR=MiTAC
P: /devices/platform/i8042/serio1/input/input2/event2
N: input/event2
S: input/by-path/platform-i8042-serio-1-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio1/input/input2/event2
E: MAJOR=13
E: MINOR=66
E: DEVNAME=/dev/input/event2
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: DMI_VENDOR=MiTAC
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse
P: /devices/platform/i8042/serio1/input/input2/mouse0
N: input/mouse0
S: input/by-path/platform-i8042-serio-1-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio1/input/input2/mouse0
E: MAJOR=13
E: MINOR=32
E: DEVNAME=/dev/input/mouse0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse
P: /devices/platform/pcspkr/input/input0/event0
N: input/event0
S: input/by-path/platform-pcspkr-event-spkr
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/pcspkr/input/input0/event0
E: MAJOR=13
E: MINOR=64
E: DEVNAME=/dev/input/event0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-pcspkr
E: DMI_VENDOR=MiTAC
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
DRM Information from dmesg:
---------------------------
-- System Information:
Debian Release: 6.0.1
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'proposed-updates'), (500, 'testing'), (500, 'stable')
Architecture: i386 (i586)
Kernel: Linux 2.6.32-33
Locale: LANG=is_IS, LC_CTYPE=is_IS (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/bash
Versions of packages xserver-xorg-video-trident depends on:
ii libc6 2.11.2-10 Embedded GNU C Library: Shared lib
ii xserver-xorg-core [xorg-video 2:1.9.5-1 Xorg X server - core server
xserver-xorg-video-trident recommends no packages.
xserver-xorg-video-trident suggests no packages.
-- no debconf information
--
Bjarni I. Gislason
Reply to: