[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: xwindows ati rage 128 pro



-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Adam Lafayette schrieb:

|>Usually I use the xf86config program which comes
|>with X to configure the
|>X Display Server.
|
|
| I tried this.  It allowed me to pick the ATI Rage 128
| video card.  I look up the specs for my monitor
| thinking that might be the problem.
| Dell

Hi again

Here is a XF86Config-4 file for a ATI Rage Pro 64 card. It should work
with a Rage 128 as well. The keyboard layout is for swiss-german and the
mouse driver assumes that gpm is running.

You might alter the section "Monitor" to get higher refresh rates.
Furthermore not all Cards support the same resolution/color-depth
combinations. So just try to change the "DefaultDepth". If you change
"DefaultDepth    24" to "DefaultDepth    16" it means, that X takes the
resolutions for 16 bits defined within the screens section.

You might even try to add a

	SubSection "Display"
~                Depth           32
~                Modes           "1024x768"
~        EndSubSection

to see if 32 bit color-depth works.

Regards

Marcel





### BEGIN DEBCONF SECTION
# XF86Config-4 (XFree86 server configuration file) generated by dexconf, the
# Debian X Configuration tool, using values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# If you want your changes to this file preserved by dexconf, only make
changes
# before the "### BEGIN DEBCONF SECTION" line above, and/or after the
# "### END DEBCONF SECTION" line below.
#
# To change things within the debconf section, run the command:
#   dpkg-reconfigure xserver-xfree86
# as root.  Also see "How do I add custom sections to a dexconf-generated
# XF86Config or XF86Config-4 file?" in /usr/share/doc/xfree86-common/FAQ.gz.

Section "Files"
~        FontPath        "unix/:7100"                    # local font server
~        # if the local font server has problems, we can fall back on these
~        FontPath        "/usr/lib/X11/fonts/misc"
~        FontPath        "/usr/lib/X11/fonts/cyrillic"
~        FontPath        "/usr/lib/X11/fonts/100dpi/:unscaled"
~        FontPath        "/usr/lib/X11/fonts/75dpi/:unscaled"
~        FontPath        "/usr/lib/X11/fonts/Type1"
~        FontPath        "/usr/lib/X11/fonts/Speedo"
~        FontPath        "/usr/lib/X11/fonts/100dpi"
~        FontPath        "/usr/lib/X11/fonts/75dpi"
EndSection

Section "Module"
~        Load    "GLcore"
~        Load    "bitmap"
~        Load    "dbe"
~        Load    "ddc"
~        Load    "dri"
~        Load    "extmod"
~        Load    "freetype"
~        Load    "glx"
~        Load    "int10"
~        Load    "pex5"
~        Load    "record"
~        Load    "speedo"
~        Load    "type1"
~        Load    "vbe"
~        Load    "xie"
EndSection

Section "InputDevice"
~        Identifier      "Generic Keyboard"
~        Driver          "keyboard"
~        Option          "CoreKeyboard"
~        Option          "XkbRules"      "xfree86"
~        Option          "XkbModel"      "pc104"
~        Option          "XkbLayout"     "de_CH"
~        Option          "XkbVariant"    "CH"
EndSection

Section "InputDevice"
~        Identifier      "Configured Mouse"
~        Driver          "mouse"
~        Option          "CorePointer"
~        Option          "Device"                "/dev/gpmdata"
~        Option          "Protocol"              "ImPS/2"
~        Option          "Emulate3Buttons"       "true"
~        Option          "ZAxisMapping"          "4 5"
EndSection

Section "InputDevice"
~        Identifier      "Generic Mouse"
~        Driver          "mouse"
~        Option          "SendCoreEvents"        "true"
~        Option          "Device"                "/dev/input/mice"
~        Option          "Protocol"              "ImPS/2"
~        Option          "Emulate3Buttons"       "true"
~        Option          "ZAxisMapping"          "4 5"
EndSection

Section "Device"
~        Identifier      "Standardgrafikkarte"
~        Driver          "ati"
~        Option          "UseFBDev"              "true"
EndSection

Section "Monitor"
~        Identifier      "Standardbildschirm"
~        HorizSync       30-57
~        VertRefresh     43-72
~        Option          "DPMS"
EndSection

Section "Screen"
~        Identifier      "Default Screen"
~        Device          "Standardgrafikkarte"
~        Monitor         "Standardbildschirm"
~        DefaultDepth    24
~        SubSection "Display"
~                Depth           1
~                Modes           "1024x768"
~        EndSubSection
~        SubSection "Display"
~                Depth           4
~                Modes           "1024x768"
~        EndSubSection
~        SubSection "Display"
~                Depth           8
~                Modes           "1024x768"
~        EndSubSection
~        SubSection "Display"
~                Depth           15
~                Modes           "1024x768"
~        EndSubSection
~        SubSection "Display"
~                Depth           16
~                Modes           "1024x768"
~        EndSubSection
~        SubSection "Display"
~                Depth           24
~                Modes           "1024x768"
~        EndSubSection
EndSection

Section "ServerLayout"
~        Identifier      "Default Layout"
~        Screen          "Default Screen"
~        InputDevice     "Generic Keyboard"
~        InputDevice     "Configured Mouse"
~        InputDevice     "Generic Mouse"
EndSection

Section "DRI"
~        Mode    0666
EndSection

### END DEBCONF SECTION


-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (MingW32)

iD8DBQFCAjov1EXMUTKVE5URAt+VAJ453eymmEZ8/K9x0gDbhw25i81a4QCeMHEC
QNR5d0J3eBOsDwHioNlm7DQ=
=wbMw
-----END PGP SIGNATURE-----



Reply to: