RE: iSCSI Target (LIO)
Moin.
Danke erst mal, das ist der client teil, ich mein wenn ich ein linux als iscsi server nutze... iscsiadm gibt ja nur den client aus...
Gesendet von meinem Fujitsu LIFEBOOK E754
Mit freundlichen Grüßen
Dirk Laurenz
Principal Account Technology Consultant
Projektmanager
Sales Germany
FUJITSU
Hildesheimer Strasse 25, 30880 Laatzen, Deutschland
Tel.: +49 (511) 84 89 18 08
Mob.: +49 (170) 22 10 781
Fax: +49 (511) 84 89 25 18 08
E-mail: dirk.laurenz@ts.fujitsu.com
Web: ts.fujitsu.com
Firmenangaben: Fujitsu Technology Solutions GmbH / ts.fujitsu.com/imprint
Folgen Sie uns! Die Fujitsu Community
This communication contains information that is confidential, proprietary in nature and/or privileged. It is for the exclusive use of the intended recipient(s). If you are not the intended recipient(s) or the person responsible for delivering it to the intended recipient(s), please note that any form of dissemination, distribution or copying of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender and delete the original communication. Thank you for your cooperation.
Please be advised that neither Fujitsu, its affiliates, its employees or agents accept liability for any errors, omissions or damages caused by delays of receipt or by any virus infection in this message or its attachments, or which may otherwise arise as a result of this e-mail transmission.
-----Original Message-----
From: Martin Johannes Dauser <mdauser@cs.sbg.ac.at>
Sent: Thursday, September 19, 2019 10:35 AM
To: debian-user-german@lists.debian.org
Subject: Re: iSCSI Target (LIO)
Liste alle aktuellen Sessions:
# iscsiadm -m session
tcp: [1] 192.168.90.239:3260,1033 iqn.1992-08.com.netapp:sn.62a9975d35cf11e5abb600a0985789e1:vs.6 (non-flash)
------------------------------
Zeige iSCSI Database bezüglich eingeloggter Sessions:
# iscsiadm -m session -o show -P 3
iSCSI Transport Class version 2.0-870
version 6.2.0.874-10
Target: iqn.1992-08.com.netapp:sn.62a9975d35cf11e5abb600a0985789e1:vs.6 (non-flash)
Current Portal: 192.168.90.239:3260,1033
Persistent Portal: 192.168.90.239:3260,1033
**********
Interface:
**********
Iface Name: default
Iface Transport: tcp
Iface Initiatorname: iqn.1994-05.com.redhat:412deb1b2c62
Iface IPaddress: 192.168.4.4
Iface HWaddress: <empty>
Iface Netdev: <empty>
SID: 1
iSCSI Connection State: LOGGED IN
iSCSI Session State: LOGGED_IN
Internal iscsid Session State: NO CHANGE
*********
Timeouts:
*********
Recovery Timeout: 5
Target Reset Timeout: 30
LUN Reset Timeout: 30
Abort Timeout: 15
*****
CHAP:
*****
username: mink
password: ***********
username_in: <empty>
password_in: *****************
************************
Negotiated iSCSI params:
************************
HeaderDigest: None
DataDigest: None
MaxRecvDataSegmentLength: 262144
MaxXmitDataSegmentLength: 65536
FirstBurstLength: 65536
MaxBurstLength: 1048576
ImmediateData: Yes
InitialR2T: Yes
MaxOutstandingR2T: 1
************************
Attached SCSI devices:
************************
Host Number: 3 State: running
scsi3 Channel 00 Id 0 Lun: 0
Attached scsi disk sdb State: running
Current Portal: 192.168.90.240:3260,1030
Persistent Portal: 192.168.90.240:3260,1030
**********
Interface:
**********
Iface Name: default
Iface Transport: tcp
Iface Initiatorname: iqn.1994-05.com.redhat:412deb1b2c62
Iface IPaddress: 192.168.4.4
Iface HWaddress: <empty>
Iface Netdev: <empty>
SID: 2
iSCSI Connection State: LOGGED IN
iSCSI Session State: LOGGED_IN
Internal iscsid Session State: NO CHANGE
*********
Timeouts:
*********
Recovery Timeout: 5
Target Reset Timeout: 30
LUN Reset Timeout: 30
Abort Timeout: 15
*****
CHAP:
*****
username: mink
password: **************
username_in: <empty>
password_in: ****************
************************
Negotiated iSCSI params:
************************
HeaderDigest: None
DataDigest: None
MaxRecvDataSegmentLength: 262144
MaxXmitDataSegmentLength: 65536
FirstBurstLength: 65536
MaxBurstLength: 1048576
ImmediateData: Yes
InitialR2T: Yes
MaxOutstandingR2T: 1
************************
Attached SCSI devices:
************************
Host Number: 4 State: running
scsi4 Channel 00 Id 0 Lun: 0
Attached scsi disk sdc State: running
------------------------------
Liste LUNS, die verbunden sind auf:
# lsscsi
[0:0:0:0] disk VMware Virtual disk 1.0 /dev/sda [2:0:0:0] cd/dvd NECVMWar VMware IDE CDR10 1.00 /dev/sr0 [3:0:0:0] disk NETAPP LUN C-Mode 9400 /dev/sdb [4:0:0:0] disk NETAPP LUN C-Mode 9400 /dev/sdc
On Thu, 2019-09-19 at 07:57 +0000, dirk.laurenz@ts.fujitsu.com wrote:
> Moin,
>
> wie kann ich einfach feststellen, dass mein iSCSI Target läuft?
> Da es ja Teil des Kernels ist, kann ich ja kaum auf einen Prozess gucken.
>
> Gruß,
>
> Dirk
Reply to: