Re: Debian Squeeze - XEN und PCI Passthrough
Nachtrag:
From: "Daniel Bauer"
[...]
Meiner Meinung nach funktioniert die Übergabe, nur mit dem IRQ klappt es nicht ...
Muß ich noch etwas beachten, da das Board zwar VT, aber nicht VT-IO beherscht?
Diese Meldungen kommen in der dom0 via dmesg:
Das kommt beim Start der dom0:
[ 69.524898] pciback 0000:02:01.0: seizing device
[ 69.532796] pciback 0000:02:01.0: enabling device (0101 -> 0103)
[ 69.540459] pciback 0000:02:01.0: PCI IRQ 24 -> rerouted to legacy IRQ 16
[ 69.548086] xen: registering gsi 16 triggering 0 polarity 1
[ 69.548092] Already setup the GSI :16
[ 69.555687] pciback 0000:02:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 69.563402] pciback 0000:02:01.0: PCI IRQ 16 -> rerouted to legacy IRQ 16
[ 69.571062] pciback 0000:02:01.0: PCI INT A disabled
[ 69.578766] xen-pciback: backend is passthrough
Das kommt beim Starten der domU:
[ 1547.462035] xen-blkback:ring-ref 9, event-channel 14, protocol 1 (x86_64-abi)
[ 1547.968407] xen-blkback:ring-ref 770, event-channel 16, protocol 1 (x86_64-abi)
[ 1551.861569] pciback 0000:02:01.0: enabling device (0000 -> 0003)
[ 1551.899879] pciback 0000:02:01.0: PCI IRQ 16 -> rerouted to legacy IRQ 16
[ 1551.908032] xen: registering gsi 16 triggering 0 polarity 1
[ 1551.908038] Already setup the GSI :16
[ 1551.916215] pciback 0000:02:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1556.699794] xen-pciback[0000:02:01.0] IRQ line is not shared with other domains. Turning ISR off
Und das beim Beenden der domU:
[ 1574.417274] pciback 0000:02:01.0: PCI IRQ 16 -> rerouted to legacy IRQ 16
[ 1574.426264] pciback 0000:02:01.0: PCI INT A disabled
THX
Daniel
Reply to: