Slink -> Potato 2000-01-21 upgrade report.
The other night, I upgraded a machine at PSU (Portland State
University) from mostly `slink' (with some updated packages from
`potato') to `potato'. I ran the entire upgrade from a
gnome-terminal over an `ssh' connection. It went very well.
I used terminal flow control (C-s and C-q) to stop and start the
output during installation, so that I could paste error messages into
an editor, to take note of them. Here is that (annotated) file, for
the curious. I have not gotten around to looking at the bug pages
and filing bug reports on unreported problems yet; I will try and
take some time for that this week.
8<---------------------------------------------------------------------->8
Unpacking smbclient (from .../smbclient_2.0.6-2_i386.deb) ...
dpkg: error processing /var/cache/apt/archives/smbclient_2.0.6-2_i386.deb (--unpack):
trying to overwrite `/usr/bin/smbclient', which is also in package samba
dpkg-deb: subprocess paste killed by signal (Broken pipe)
LILO, the LInux LOader, sets up your system to boot Linux directly
from your hard disk, without the need for a boot floppy.
Use of uninitialized value at /usr/sbin/liloconfig line 65, <FSTAB> chunk 3.
Use of uninitialized value at /usr/sbin/liloconfig line 65, <FSTAB> chunk 11.
Use of uninitialized value at /usr/sbin/liloconfig line 65, <FSTAB> chunk 19.
Use of uninitialized value at /usr/sbin/liloconfig line 65, <FSTAB> chunk 23.
You already have a LILO configuration in the file /etc/lilo.conf
Checking your /etc/lilo.conf for incompatible options...
Install a boot block using your current LILO configuration? [Yes]
WARNING: Even if lilo runs successfully, see /usr/doc/lilo/INCOMPAT.gz
for changes in the usage of the /etc/lilo.conf file.
If needed: edit /etc/lilo.conf and rerun '/sbin/lilo -v'
Running lilo...
LILO version 21, Copyright 1992-1998 Werner Almesberger
Reading boot sector from /dev/sda3
Merging with /boot/boot.b
Boot image: /boot/vmlinuz
Added Linux *
Boot image: /boot/vmlinuz.old
Added LinuxOLD
/boot/boot.0803 exists - no backup copy made.
Writing boot sector.
dhelp_parse: can't open /usr/share/doc/HTML/default/index.html
dhelp_parse: can't write index
warning: error occured during execution of /usr/sbin/dhelp_parse -a at /usr/sbin/install-docs line 258.
* fvwm2 couldn't find /etc/menu-methods/fvwm2 for a chmod. I had to
touch that file in order to get it to --remove.
For more information, contact Branden Robinson <branden@debian.org>.
Warning: register-window-manager and the /etc/X11/window-managers file will
soon become obsolete; window managers should instead use the
update-alternatives command and register themselves as an "x-window-manager".
For more information, contact Branden Robinson <branden@debian.org>.
Unpacking replacement kdebase ...
dpkg: error processing /var/cache/apt/archives/kdebase_4%3a1.1.2-19990906-1_i386.deb (--unpack):
trying to overwrite `/usr/bin/kthememgr', which is also in package kthememgr
dpkg-deb: subprocess paste killed by signal (Broken pipe)
wallpapers directory already exists...not creating.
dpkg: regarding .../archives/rman_3.0.8-1_i386.deb containing rman:
kdebase conflicts with rman
rman (version 3.0.8-1) is to be installed.
dpkg: error processing /var/cache/apt/archives/rman_3.0.8-1_i386.deb (--unpack):
conflicting packages - not installing rman
* Octave re-installed; I will need to repack the locally compiled one,
this time with a point number on the debian version.
Preparing to replace octave 2.0.15-1 (using .../octave_2.0.15-1_i386.deb) ...
remove/octave: Ignoring emacsen flavour emacs
remove/octave: Purging byte-compiled files for flavour emacs20
Unpacking replacement octave ...
Preparing to replace octave-headers 2.0.15-1 (using .../octave-headers_2.0.15-1_all.deb) ...
Unpacking replacement octave-headers ...
Checking if your system passwd, shadow and group files are correct...
Removing user "tape" (26)
Changing homedirectory of man to /var/cache/man
Changing homedirectory of postgres to /var/lib/postgres
Changing GECOS of backup to "backup".
Changing shell of backup to /bin/sh
Adding group "video" (44)
Would commit 6 changes
It looks like I need to make some changes to your system. Without those
changes some packages might not work correctly. The list of changes are
listed above. For more documentation on the Debian account policies
please read /usr/share/doc/base-passwd/README.
Should I update your system? [Y/n] Y
Reading passwd from /usr/share/base-passwd/passwd.master
Reading group from /usr/share/base-passwd/group.master
Reading passwd from /etc/passwd
Reading shadow from /etc/shadow
Reading group from /etc/group
Removing user "tape" (26)
Changing homedirectory of man to /var/cache/man
Changing homedirectory of postgres to /var/lib/postgres
Changing GECOS of backup to "backup".
Changing shell of backup to /bin/sh
Adding group "video" (44)
6 changes have been made, rewriting files
Writing passwd-file to /etc/passwd.upwd-write
Replacing "/etc/passwd" with "/etc/passwd.upwd-write"
Writing shadow-file to /etc/shadow.upwd-write
Replacing "/etc/shadow" with "/etc/shadow.upwd-write"
Writing group-file to /etc/group.upwd-write
Replacing "/etc/group" with "/etc/group.upwd-write"
Moving lib from /usr/lib/ssl to /etc/ssl
cp: `/usr/lib/ssl/lib' and `/etc/ssl/lib' are the same file
Moving certs from /usr/lib/ssl to /etc/ssl
cp: `/usr/lib/ssl/certs' and `/etc/ssl/certs' are the same file
Moving private from /usr/lib/ssl to /etc/ssl
cp: `/usr/lib/ssl/private' and `/etc/ssl/private' are the same file
Removeing obsolete link /usr/lib/ssl
* ^^^ The second time through, it installed fine.
Preparing to replace gv 1:3.5.8-11 (using .../gv_1%3a3.5.8-15_i386.deb) ...
Removing old MIME information...
Warning: 'install-mime' is obsolete -- use 'update-mime' instead (see man page)
- There is now nothing as 'view' for MIME type 'application/pdf'
- There is now nothing as 'view' for MIME type 'application/postscript'
- There is now nothing as 'view' for MIME type 'application/ghostview'
Unpacking replacement gv ...
dpkg - warning: while removing ftape-module-2.0.30, directory `/lib/modules/2.0.30' not empty so not removed.
No diversion `diversion of /lib/modules/2.0.30/misc/ftape.o to /lib/modules/2.0.30/misc/ftape.o.old by ftape-module-2.0.30', none removed
modprobe: kernel: QM_SYMBOLS: Function not implemented
dpkg: error processing ftape-module-2.0.30 (--remove):
subprocess post-removal script returned error exit status 1
Removing ftape-module-2.0.33 ...
No diversion `diversion of /lib/modules/=KVERS/misc/ftape.o to /lib/modules/2.0.33/misc/ftape.o.old by ftape-module-2.0.33', none removed
modprobe: kernel: QM_SYMBOLS: Function not implemented
dpkg: error processing ftape-module-2.0.33 (--remove):
subprocess post-removal script returned error exit status 1
Removing ftape-module-2.0.34 ...
No diversion `diversion of /lib/modules/=KVERS/misc/ftape.o to /lib/modules/2.0.34/misc/ftape.o.old by ftape-module-2.0.34', none removed
modprobe: kernel: QM_SYMBOLS: Function not implemented
dpkg: error processing ftape-module-2.0.34 (--remove):
subprocess post-removal script returned error exit status 1
Errors were encountered while processing:
ftape-module-2.0.30
ftape-module-2.0.33
ftape-module-2.0.34
E: Sub-process /usr/bin/dpkg returned an error code (1)
[status 100]
* ^^^ I fixed those by commenting off the `depmod -a' at the bottom of
the postrm scripts. The currently running kernel is compiled
staticly, without module support, "for security reasons" (eg:
heroin.c)
Preparing to replace libtool 1.2d-1 (using .../libtool_1.3.3-6_all.deb) ...
dhelp_parse: Warning - documents in /usr/doc are no longer supported!
Unpacking replacement libtool ...
* This is fixed too...
Preparing to replace modutils 2.1.121-18 (using .../modutils_2.3.9-2_i386.deb) ...
Removing `diversion of /usr/include/linux/kerneld.h to /usr/include/linux/kerneld.h.libc6 by modutils'
dpkg-divert: rename involves overwriting `/usr/include/linux/kerneld.h' with
different file `/usr/include/linux/kerneld.h.libc6', not allowed
WARNING: the configuration format for modutils has changed!
Your modutils configuration contains path statements. Since version 2.3.1
of modutils the syntax for this statement has changed. The section is
no longer automatically appended to the given path. To demonstrate: if
you have a statement like this:
path[fs]=/lib/modules/2.2.14
it should be replaced with this statement:
path[fs]=/lib/modules/2.2.14/fs
For more documentation on the syntax please see the modules.conf manpage.
Please press [ENTER] to continue
Saving KDOPT setting from /etc/init.d/kerneld ..
The modutils configurationfile /etc/conf.modules has been
renamed to /etc/modules.conf. I tried to rename the file,
but there is already a file called modules.conf present.
You will have to resolve this situation manually.
Removing obsoleted files:
Dpkg might ask you if you want the new configuration files in /etc/init.d.
This is generally a good idea, unless you have really changed any of these
files. The KDOPT setting in /etc/init.d/kerneld will be saved even if you
install a new version of this file.
Unpacking replacement modutils ...
dpkg: warning - unable to delete old file `/usr/man/man2': Directory not empty
* Will this affect anyone on cathcart?
Preparing to replace snns 4.1-3 (using .../archives/snns_4.2-2_i386.deb) ...
Unpacking replacement snns ...
Preparing to replace imagemagick 4.0.4-3 (using .../imagemagick_4.2.8-4.1_i386.deb) ...
Warning: 'install-mime' is obsolete -- use 'update-mime' instead (see man page)
Stopping Secure Shell server: sshd.
Unpacking replacement ssh ...
I'm still on... How do they do that? Oh, I see. It forks and
creates a new session group. So when the one in /var/run/sshd.pid is
stopped, the one I'm logged into stays running.
Removing ftape-module-2.0.30 ...
dpkg - warning: while removing ftape-module-2.0.30, directory `/lib/modules/2.0.30' not empty so not removed.
No diversion `diversion of /lib/modules/2.0.30/misc/ftape.o to /lib/modules/2.0.30/misc/ftape.o.old by ftape-module-2.0.30', none removed
Warning: modutils is reading from /etc/modules.conf and
ignoring /etc/conf.modules. The use of /etc/conf.modules is depreciated,
please remove /etc/conf.modules as soon as possible. Command
rm /etc/conf.modules
depmod: QM_MODULES: Function not implemented
dpkg: error processing ftape-module-2.0.30 (--remove):
subprocess post-removal script returned error exit status 255
Errors were encountered while processing:
ftape-module-2.0.30
E: Sub-process /usr/bin/dpkg returned an error code (1)
[status 100]
* Now removed...
Setting up iplogger (1.1-7) ...
Starting IP paranoia daemons: tcplogd icmplogd.
Registering PAM documentation...dhelp_parse: can't open /usr/share/doc/HTML/default/index.html
dhelp_parse: can't write index
warning: error occured during execution of /usr/sbin/dhelp_parse -a at /usr/sbin/install-docs line 258.
dhelp_parse: can't open /usr/share/doc/HTML/default/index.html
dhelp_parse: can't write index
warning: error occured during execution of /usr/sbin/dhelp_parse -d at /usr/sbin/install-docs line 218.
dhelp_parse: can't open /usr/share/doc/HTML/default/index.html
dhelp_parse: can't write index
warning: error occured during execution of /usr/sbin/dhelp_parse -a at /usr/sbin/install-docs line 258.
dhelp_parse: can't open /usr/share/doc/HTML/default/index.html
dhelp_parse: can't write index
warning: error occured during execution of /usr/sbin/dhelp_parse -d at /usr/sbin/install-docs line 218.
dhelp_parse: can't open /usr/share/doc/HTML/default/index.html
dhelp_parse: can't write index
warning: error occured during execution of /usr/sbin/dhelp_parse -a at /usr/sbin/install-docs line 258.
done.
* Needs to be restarted by hand.
Setting up gpm (1.17.8-13) ...
Installing new version of config file /etc/init.d/gpm ...
Stopping mouse interface server: gpm.
$DISPLAY set and gpm not repeating; starting non-repeating gpm within X can cause problems. Not starting gpm.
Setting up metamail (2.7-33) ...
Warning: 'install-mime' is obsolete -- use 'update-mime' instead (see man page)
Warning: 'install-mime' is obsolete -- use 'update-mime' instead (see man page)
Warning: 'install-mime' is obsolete -- use 'update-mime' instead (see man page)
* Might need to run `pilotconfig' to set the /dev/pilot link.
Setting up dump (0.4b12-1) ...
WARNING:
Be careful who you put in group 'disk', since this
may give access to files that only root should be
allowed to access.
On this computer, group 'disk' includes the following person(s):
backup,andreas,karlheg
Ensuring /var/lib/dumpdates is writeable by group disk.
* Do we need to be in group `disk' for any real reason?
Setting up modutils (2.3.9-2) ...
Installing new version of config file /etc/modutils/aliases ...
Installing new version of config file /etc/modutils/paths ...
WARNING: you already have an /etc/modules.conf file which has not
been generated by update-modules. Debian now uses a new system which
uses multiple files in the /etc/modutils directory. See the manpage
for update-modules for more information on this setup.
Please check all changes you made in /etc/modules.conf and either
apply them to the provided files in /etc/modutils or add your own
files there. Then run update-modules.
* DQS runs. I wonder if it works?
Local localhost localhost NONE NONE
Starting /usr/sbin/qmaster...
time=948439901 DQS_INFO_0484 common_dir/host_file not found - making ../SRC/dqs_setup.c 1132 /usr/sbin/qmaster cathcart.sysc.pdx.edu
time=948439901 DQS_ERROR_0485 "cathcart.sysc.pdx.edu" not found in HOST_LIST - adding ../SRC/dqs_setup.c 1137 /usr/sbin/qmaster cathcart.sysc.pdx.edu
time=948439901 DQS_ERROR_0486 "localhost" not found in HOST_LIST - adding ../SRC/dqs_setup.c 1146 /usr/sbin/qmaster cathcart.sysc.pdx.edu
time=948439901 DQS_INFO_0004 adding "cathcart" to Host_has as an alias for "cathcart.sysc.pdx.edu" ../SRC/dqs_add_del.c 198 /usr/sbin/qmaster cathcart.sysc.pdx.edu
time=948439901 DQS_INFO_0004 adding "cc" to Host_has as an alias for "cathcart.sysc.pdx.edu" ../SRC/dqs_add_del.c 198 /usr/sbin/qmaster cathcart.sysc.pdx.edu
time=948439901 DQS_INFO_0487 common_dir/man_file not found - making ../SRC/dqs_setup.c 1166 /usr/sbin/qmaster cathcart.sysc.pdx.edu
time=948439901 DQS_INFO_0490 common_dir/op_file not found - making ../SRC/dqs_setup.c 1207 /usr/sbin/qmaster cathcart.sysc.pdx.edu
time=948439901 DQS_ERROR_0349 error: unable to open common_dir/generic_queue for reading ../SRC/dqs_queue.c 342 /usr/sbin/qmaster cathcart.sysc.pdx.edu
time=948439901 DQS_INFO_0494 writing generic queue configuration "common_dir/generic_queue" ../SRC/dqs_setup.c 1342 /usr/sbin/qmaster cathcart.sysc.pdx.edu
Starting /usr/sbin/dqs_execd...
* Fixed when I ran down the /etc/ directory.
You have an old-style 0setserial entry. The configuration
mechanism has changed completely from 2.14.
Renaming your old /etc/rc.boot/0setserial to 0setserial.pre-2.15
This release uses serial.conf in /etc/ to configure the ports
When you shutdown or halt your machine, your current settings should
be automatically stored, providing you do not have either
a multiport or a hayes device (edit /etc/serial.conf by hand).
Attention PCMCIA users - pcmcia has its own configuration for
pcmcia serial-type devices, which is not compatible with setserial.
I have attempted to compensate for this, but if you have problems
read /usr/doc/setserial/README.debian.gz
Note that if you edit serial.conf, remember to remove completely
the AUTOSAVE line from the file.
Do you want the automatic serial port configuration (recommended) (YES/no): YES
Configuring setserial automatically
Saving state of known serial devices...
backing up serial.conf
done.
setserial thought the following about your system...
###AUTOSAVE###
/dev/ttyS0 uart 16550A port 0x03f8 irq 4 spd_normal skip_test
/dev/ttyS1 uart 16550A port 0x02f8 irq 3 spd_normal skip_test
Error: the current /etc/modules.conf is not automatically generated.
Use "update-modules force" to force (re)generation.
WARNING - Tried to install the module management code to support
the serial.o module being loaded and unloaded dynamically by
kerneld (or its equivalent). update-modules failed to allow
its installation. There may be something non-standard about your
module configuration. I suggest you try running
/sbin/update-modules on your own.
Hit return to continue
* Removed. We don't need `cfs'.
Setting up cfs (1.3.3-5) ...
Configure cfs now [Y/n]? y
Use default Cryptographic Filesystem Configuration [Y/n]? n
Enter server mount point [/.cfsfs]
Enter client mount point [/crypt]
Old directories and not automatically removed.
Please remove by hand.
Creating directory /.cfsfs
Creating directory /crypt
Restarting nfs-server
Starting /usr/sbin/cfsd...
cfs ready [26719]
Use "cfsconfig" to (re)configure at a future date.
* Need to tell Andreas that igerman, translate and ding are installed.
Setting up acroread (4.0-1) ...
Warning: 'install-mime' is obsolete -- use 'update-mime' instead (see man page)
- Added new action 'view' for MIME type 'application/pdf'
Setting up amanda-client (2.4.1p1-10) ...
You need to update ~backup/.amandahosts to include an entry that allows
access by user 'backup' on your amanda server host.
--
To UNSUBSCRIBE, email to debian-testing-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to: