What may be the problem.after the last step shown above nothing is coming.it stopped there.Dear team,Im using serial console only,no monitor ,no keyboard are connected to it.After giving console=ttyS0 in boot command it is working fine but still getting problem as shown below..
Running diagnostic script obdiag/normal
Sun Fire V890, No Keyboard
Copyright 2006 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.22.24, 8192 MB memory installed, Serial #72026096.
Ethernet address 0:14:4f:4b:7:f0, Host ID: 844b07f0.
Testing /pci@8,600000/network@1
Testing /pci@8,600000/SUNW,qlc@2
Testing /pci@9,700000/ebus@1/i2c@1,2e
Testing /pci@9,700000/ebus@1/i2c@1,30
Testing /pci@9,700000/ebus@1/i2c@1,50002e
Testing /pci@9,700000/ebus@1/i2c@1,500030
Testing /pci@9,700000/ebus@1/bbc@1,0
Testing /pci@9,700000/ebus@1/bbc@1,500000
Testing /pci@8,700000/ide@1
Testing /pci@9,700000/network@1,1
Testing /pci@9,700000/usb@1,3
Testing /pci@9,700000/ebus@1/gpio@1,300600
Testing /pci@9,700000/ebus@1/pmc@1,300700
Testing /pci@9,700000/ebus@1/rtc@1,300070
{2} ok
{2} ok
{2} ok boot disk /boot/vmlinuz root=/dev/sda2 console=ttyS0
Resetting ...Rebooting with command: boot disk /boot/vmlinuz root=/dev/sda2 console=ttyS0
Enabling system bus....... Done
Initializing CPUs......... Done
Initializing boot memory.. Done
Initializing OpenBoot
Probing system devices
ChassisSerialNumber 0638AM1097
Probing I/O buses
screen not found.
keyboard not found.
Keyboard not present. Using ttya for input and output.
Probing system devices
ChassisSerialNumber 0638AM1097
Probing I/O buses
Sun Fire V890, No Keyboard
Copyright 2006 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.22.24, 8192 MB memory installed, Serial #72026096.
Ethernet address 0:14:4f:4b:7:f0, Host ID: 844b07f0.
Boot device: /pci@8,600000/SUNW,qlc@2/fp@0,0/disk@0,0 File and args: /boot/vmlinuz root=/dev/sda2 console=ttyS0 video=atyfb:off fb=false
SILO Version 1.4.14
Allocated 64 Megs of memory at 0x40000000 for kernel
Uncompressing image...
Loaded kernel version 3.2.57[ 0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 4.22.24 2006/12/08 10:07'[ 0.000000] PROM: Built device tree with 117446 bytes of memory.
[ 0.000000] PROMLIB: Root node compatible:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-sparc64-smp (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.57-3
[ 0.000000] bootconsole [earlyprom0] enabled
[ 0.000000] ARCH: SUN4U
[ 0.000000] Ethernet address: 00:14:4f:4b:07:f0
[ 0.000000] Kernel: Using 2 locked TLB entries for main kernel image.
[ 0.000000] Remapping the kernel... done.
[ 0.000000] OF stdout device is: /pci@9,700000/ebus@1/serial@1,400000:a[ 0.000000] Kernel command line: root=/dev/sda2 console=ttyS0 video=atyfb:off fb=false
[ 0.000000] Top of RAM: 0xa1ffb14000, Total RAM: 0x1ffb02000
[ 0.000000] Memory hole size: 655360MB
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x05000000 -> 0x050ffd8a
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x05000000 -> 0x050ff7ff
[ 0.000000] 0: 0x050ff800 -> 0x050ffd73
[ 0.000000] 0: 0x050ffd7b -> 0x050ffd8a
[ 0.000000] Booting Linux...
[ 0.000000] CPU CAPS: [flush,stbar,swap,muldiv,v9,ultra3,mul32,div32]
[ 0.000000] CPU CAPS: [v8plus,popc,vis,vis2]
[ 0.000000] PERCPU: Embedded 6 pages/cpu @fffff8a004c00000 s20416 r8192 d20544 u1048576
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1039749[ 0.000000] Memory: 8298752k available (3592k kernel code, 1480k data, 232k init) [fffff80000000000,000000a1ffb14000]
[ 0.000000] PID hash table entries: 4096 (order: 2, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 10, 8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 9, 4194304 bytes)
[ 33.458033] Calibrating delay using timer specific routine.. 19.99 BogoMIPS (lpj=39994)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:255
[ 0.000000] clocksource: mult[64000000] shift[24]
[ 0.000000] clockevent: mult[28f5c29] shift[32]
[ 0.000000] Console: colour dummy device 80x25
[ 33.552108] pid_max: default: 32768 minimum: 301
[ 33.607406] Security Framework initialized
[ 33.656289] AppArmor: AppArmor disabled by boot time parameter
[ 33.726109] Mount-cache hash table entries: 512
[ 33.780614] Initializing cgroup subsys cpuacct
[ 33.833381] Initializing cgroup subsys memory
[ 33.885468] Initializing cgroup subsys devices
[ 33.938577] Initializing cgroup subsys freezer
[ 33.991703] Initializing cgroup subsys net_cls
[ 34.044830] Initializing cgroup subsys blkio
[ 34.095882] Initializing cgroup subsys perf_event
[ 34.152273] Performance events: Supported PMU type is 'ultra4+'
[ 34.224042] CPU 0: synchronized TICK with master CPU (last diff -1 cycles, maxerr 8 cycles)
[ 34.323467] CPU 16: synchronized TICK with master CPU (last diff 0 cycles, maxerr 8 cycles)
[ 34.423219] CPU 18: synchronized TICK with master CPU (last diff 0 cycles, maxerr 0 cycles)
[ 34.423249] Brought up 4 CPUs
[ 34.558397] Testing NMI watchdog ... OK.
[ 34.684248] devtmpfs: initialized
[ 34.723534] print_constraints: dummy:
[ 34.768002] NET: Registered protocol family 16
[ 34.824694] /pci@8,700000: SCHIZO PCI Bus Module ver[7:0]
[ 34.887463] /pci@8,700000: PCI IO[7ffef000000] MEM[7fe00000000]
[ 34.961945] PCI: Scanning PBM /pci@8,700000
[ 35.010617] /pci@8,600000: SCHIZO PCI Bus Module ver[7:0]
[ 35.074758] /pci@8,600000: PCI IO[7ffed000000] MEM[7fd00000000]
[ 35.149239] PCI: Scanning PBM /pci@8,600000
[ 35.197703] /pci@8,600000: PCI Error, primary error type[Master Abort]
[ 35.197740] /pci@9,700000: SCHIZO PCI Bus Module ver[7:0]
[ 35.197747] /pci@9,700000: PCI IO[7ffeb000000] MEM[7fc00000000]
[ 35.201434] PCI: Scanning PBM /pci@9,700000
[ 35.202596] /pci@9,600000: SCHIZO PCI Bus Module ver[7:0]
[ 35.202604] /pci@9,600000: PCI IO[7ffe9000000] MEM[7fb00000000]
[ 35.206292] PCI: Scanning PBM /pci@9,600000
[ 35.646434] /pci@8,600000: bytemask[0003] was_block(0) space(Memory)
[ 35.722477] /pci@8,600000: PCI AFAR [00000000004000c0]
[ 35.783936] /pci@8,600000: PCI Secondary errors [(Master Abort)]
[ 35.855832] Unable to handle kernel NULL pointer dereference
[ 35.923522] tsk->{mm,active_mm}->context = 0000000000000000
[ 35.990191] tsk->{mm,active_mm}->pgd = fffff8a000961690
[ 36.052694] \|/ ____ \|/
[ 36.052696] "@'/ .. \`@"
[ 36.052698] /_| \__/ |_\
[ 36.052699] \__U_/
[ 36.228741] swapper/0(0): Oops [#1]
[ 36.270409] TSTATE: 0000004411e01602 TPC: 000000000043d04c TNPC: 000000000043d050 Y: 00000000 Not tainted
[ 36.388128] TPC: <schizo_pcierr_intr+0x12c/0x400>
[ 36.444370] g0: 0000000000000000 g1: 0000000000000000 g2: 00060002010b003f g3: 0000000000000000
[ 36.548540] g4: fffff8a1ff0d58a0 g5: fffff8a0042cc000 g6: fffff8a1ff0f4000 g7: 0000000000000000
[ 36.652710] o0: 00000000008e4f30 o1: fffff8a004c04148 o2: 0000000000000006 o3: fffff8a1ffac3c7e
[ 36.756880] o4: 0000000000000014 o5: 000000000000000e sp: fffff8a1ffac33c1 ret_pc: 0000000000000000
[ 36.865214] RPC: < (null)>
[ 36.906883] l0: 0000000000890000 l1: 0000000011001601 l2: 000000000042ae20 l3: 0000000000000400
[ 37.011053] l4: 0000000000000000 l5: 0000000000000000 l6: 0000000000000000 l7: 0000000000000008
[ 37.115223] i0: 0000000000000000 i1: fffff8a1ff15e800 i2: 0000000000000001 i3: 00000000004000c0
[ 37.219392] i4: 0000000000000000 i5: 0000000000000000 i6: fffff8a1ffac3481 i7: 00000000004af244
[ 37.323569] I7: <handle_irq_event_percpu+0x78/0x204>
[ 37.382937] Call Trace:
[ 37.412106] [00000000004af244] handle_irq_event_percpu+0x78/0x204
[ 37.486065] [00000000004af3fc] handle_irq_event+0x2c/0x58
[ 37.551696] [00000000004b1c38] handle_fasteoi_irq+0xc0/0x118
[ 37.620444] [00000000004aeab0] generic_handle_irq+0x38/0x48
[ 37.688160] [000000000042a8ac] handler_irq+0xb0/0xe4
[ 37.748576] [00000000004208b4] tl0_irq5+0x14/0x20
[ 37.805871] [00000000005f60b0] find_next_bit+0x10/0xa8
[ 37.868376] [00000000004381d8] touch_nmi_watchdog+0x70/0x90
[ 37.936079] [000000000042ad7c] cpu_idle+0x4c/0x118
[ 37.994418] [00000000009265e8] after_lock_tlb+0x1b4/0x1cc
[ 38.060038] [0000000000000000] (null)
[ 38.115249] Disabling lock debugging due to kernel taint
[ 38.178794] Caller[00000000004af244]: handle_irq_event_percpu+0x78/0x204
[ 38.259003] Caller[00000000004af3fc]: handle_irq_event+0x2c/0x58
[ 38.330880] Caller[00000000004b1c38]: handle_fasteoi_irq+0xc0/0x118
[ 38.405883] Caller[00000000004aeab0]: generic_handle_irq+0x38/0x48
[ 38.479843] Caller[000000000042a8ac]: handler_irq+0xb0/0xe4
[ 38.546511] Caller[00000000004208b4]: tl0_irq5+0x14/0x20
[ 38.610055] Caller[00000000005f6134]: find_next_bit+0x94/0xa8
[ 38.678807] Caller[00000000004381d8]: touch_nmi_watchdog+0x70/0x90
[ 38.752767] Caller[000000000042ad7c]: cpu_idle+0x4c/0x118
[ 38.817352] Caller[00000000009265e8]: after_lock_tlb+0x1b4/0x1cc
[ 38.889227] Caller[0000000000000000]: (null)
[ 38.950686] Instruction DUMP: 94102006 9607a7fd c2586038 <d0586010> 40070e8c d2006038 d417a7fd 0300001e 82106100
[ 39.079859] Kernel panic - not syncing: Aiee, killing interrupt handler!
[ 39.160068] Call Trace:
[ 39.189242] [0000000000468560] do_exit+0x94/0x748
[ 39.246531] [0000000000427694] die_if_kernel+0x2a0/0x2c8
[ 39.311119] [0000000000783a44] unhandled_fault+0x8c/0x98
[ 39.375700] [0000000000784150] do_sparc64_fault+0x700/0x7a4
[ 39.443411] [00000000004079a8] sparc64_realfault_common+0x10/0x20
[ 39.517371] [000000000043d04c] schizo_pcierr_intr+0x12c/0x400
[ 39.587165] [00000000004af244] handle_irq_event_percpu+0x78/0x204
[ 39.661124] [00000000004af3fc] handle_irq_event+0x2c/0x58
[ 39.726751] [00000000004b1c38] handle_fasteoi_irq+0xc0/0x118
[ 39.795502] [00000000004aeab0] generic_handle_irq+0x38/0x48
[ 39.863214] [000000000042a8ac] handler_irq+0xb0/0xe4
[ 39.923632] [00000000004208b4] tl0_irq5+0x14/0x20
[ 39.980925] [00000000005f60b0] find_next_bit+0x10/0xa8
[ 40.043426] [00000000004381d8] touch_nmi_watchdog+0x70/0x90
[ 40.111136] [000000000042ad7c] cpu_idle+0x4c/0x118
[ 40.169472] [00000000009265e8] after_lock_tlb+0x1b4/0x1cc
[ 40.235100] Press Stop-A (L1-A) to return to the boot prom
[ 40.300819] sched: RT throttling activated
[ 40.349806] bio: create slab <bio-0> at 0
[ 40.397884] vgaarb: loaded
[ 40.430433] /pci@9,700000/ebus@1/rtc@1,300070: RTC regs at 0x7fc7e300070
[ 40.510503] Switching to clocksource stick
[ 65.102669] BUG: soft lockup - CPU#2 stuck for 21s! [migration/2:6]
[ 65.175872] Modules linked in:
[ 65.212334] TSTATE: 0000009980001600 TPC: 00000000004a51d0 TNPC: 00000000004a51d4 Y: 00000000 Tainted: G D
[ 65.341516] TPC: <stop_machine_cpu_stop+0x60/0x108>
[ 65.399837] g0: 0000000000000000 g1: 0000000000000001 g2: 0000000000000100 g3: 00000000008a7740
[ 65.504007] g4: fffff8a1ff09d880 g5: fffff8a0043cc000 g6: fffff8a1ff0c0000 g7: 0000000000000004
[ 65.608176] o0: 0000000000000003 o1: fffff8a1ff08fc7c o2: 0000000000000001 o3: 0000000000000001
[ 65.712347] o4: 0000000000000000 o5: 0000000000000000 sp: fffff8a1ff0c3481 ret_pc: 00000000004a5220
[ 65.820682] RPC: <stop_machine_cpu_stop+0xb0/0x108>
[ 65.879017] l0: fffff8a1ff085860 l1: 0000000000000002 l2: 000000000093a2c0 l3: 0000000000000400
[ 65.983186] l4: 0000000000000010 l5: 00000000009743a8 l6: 000000000093a2c0 l7: 0000000000000200
[ 66.087356] i0: fffff8a1ff08fc58 i1: fffff8a1ff08fc7c i2: 0000000000000000 i3: 0000000000000001
[ 66.191525] i4: 0000000000000000 i5: 0000000000000000 i6: fffff8a1ff0c3531 i7: 00000000004a5358
[ 66.295696] I7: <cpu_stopper_thread+0xa0/0x128>
[ 66.349861] Call Trace:
[ 66.379032] [00000000004a5358] cpu_stopper_thread+0xa0/0x128
[ 66.447786] [00000000004813f8] kthread+0x5c/0x70
[ 66.504041] [000000000042a9cc] kernel_thread+0x30/0x48
[ 66.566535] [0000000000481734] kthreadd+0xe0/0x124
[ 66.642799] BUG: soft lockup - CPU#16 stuck for 23s! [migration/16:12]
[ 66.687612] BUG: soft lockup - CPU#18 stuck for 23s! [migration/18:16]
[ 66.687617] Modules linked in:
[ 66.687622] TSTATE: 0000009980001600 TPC: 00000000004a51d0 TNPC: 00000000004a51d4 Y: 00000000 Tainted: G D
[ 66.687632] TPC: <stop_machine_cpu_stop+0x60/0x108>
[ 66.687636] g0: 0000000000000000 g1: 0000000000000001 g2: 0000000000000100 g3: 00000000008a7740
[ 66.687641] g4: fffff8a1ff10ecc0 g5: fffff8a0045cc000 g6: fffff8a1ff134000 g7: 0000000000000003
[ 66.687646] o0: 0000000000000002 o1: fffff8a1ff08fc7c o2: 0000000000000002 o3: 0000000000001000
[ 66.687652] o4: 0000000000000000 o5: 0000000000000000 sp: fffff8a1ff137481 ret_pc: 00000000004a5220
[ 66.687658] RPC: <stop_machine_cpu_stop+0xb0/0x108>
[ 66.687662] l0: fffff8a1ff11f8e0 l1: 0000000000000b4c l2: 0000000000934cc0 l3: 0000000000890000
[ 66.687668] l4: 0000000000890080 l5: 00000000008210f8 l6: 0000000000934140 l7: fffff8a1ff13d820
[ 66.687673] i0: fffff8a1ff08fc58 i1: fffff8a1ff08fc7c i2: 0000000000000000 i3: 0000000000000001
[ 66.687678] i4: 0000000000000000 i5: 0000000000000000 i6: fffff8a1ff137531 i7: 00000000004a5358
[ 66.687685] I7: <cpu_stopper_thread+0xa0/0x128>
[ 66.687688] Call Trace:
[ 66.687692] [00000000004a5358] cpu_stopper_thread+0xa0/0x128
[ 66.687697] [00000000004813f8] kthread+0x5c/0x70
[ 66.687702] [000000000042a9cc] kernel_thread+0x30/0x48
[ 66.687707] [0000000000481734] kthreadd+0xe0/0x124
[ 68.246267] Modules linked in:
[ 68.282728] TSTATE: 0000009980001600 TPC: 00000000004a51d0 TNPC: 00000000004a51d4 Y: 00000000 Tainted: G D
[ 68.411905] TPC: <stop_machine_cpu_stop+0x60/0x108>
[ 68.470233] g0: 0000000000000000 g1: 0000000000000001 g2: 0000000000000100 g3: 00000000008a7740
[ 68.574401] g4: fffff8a1ff0d4ca0 g5: fffff8a0044cc000 g6: fffff8a1ff0fc000 g7: 0000000000000002
[ 68.678571] o0: 0000000000000001 o1: fffff8a1ff08fc7c o2: 0000000000000001 o3: 000000000078a000
[ 68.782740] o4: 0000000000000000 o5: 0000000000000000 sp: fffff8a1ff0ff481 ret_pc: 00000000004a5220
[ 68.891078] RPC: <stop_machine_cpu_stop+0xb0/0x108>
[ 68.949411] l0: fffff8a1ff10f8c0 l1: 0000000000974450 l2: 0000000000200200 l3: fffff8a1ffab7e50
[ 69.053581] l4: 0000000000890080 l5: 0000000000000081 l6: fffff8a1ff105420 l7: fffff8a1ff105820
[ 69.157750] i0: fffff8a1ff08fc58 i1: fffff8a1ff08fc7c i2: 0000000000000000 i3: 0000000000000001
[ 69.261920] i4: 0000000000000000 i5: 0000000000000000 i6: fffff8a1ff0ff531 i7: 00000000004a5358
[ 69.366092] I7: <cpu_stopper_thread+0xa0/0x128>
[ 69.420257] Call Trace:
[ 69.449427] [00000000004a5358] cpu_stopper_thread+0xa0/0x128
[ 69.518179] [00000000004813f8] kthread+0x5c/0x70
[ 69.574430] [000000000042a9cc] kernel_thread+0x30/0x48
[ 69.636930] [0000000000481734] kthreadd+0xe0/0x124
On Sat, Jul 12, 2014 at 1:07 AM, Hartwig Atrops <Hartwig.Atrops@arcor.de> wrote:
Hi.
Just out of my mind, I did not check:
On Friday 11 July 2014 19:57:13 shyam prasad wrote:
> Dear Berckel,
>
> The below error i am getting after the installation.
>
>
>
> lqqqqqqqu [!!] Install the SILO boot loader on a hard disk tqqqqqqqqk
> x x
> x Installation step failed x
> x An installation step failed. You can try to run the failing item x
> x again from the menu, or skip it and choose something else. The x
> x failing step is: Install the SILO boot loader on a hard disk x
> x x
> x <Continue> x
> x x
> mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj
>
>
>
>
>
>
> <Tab> moves; <Space> selects; <Enter> activates buttons
>
> What could be the problem.How to resolve it.
If you are using a keybord and a monitor attached to the machine you try to
install, you can switch to a text console / shell via ALT-F1 or ALT-F2.
Somewhere on your disk you should find the configuration file named
silo.conf. After installation, it's in /boot, but I don't know by mind where
the disk is mounted during installation.
I would check this file (does it look reasonable?). Then run silo manually
(chroot into the system? ). Hopefully, you will get better error messages.
If you are using a serial console: no idea.
Regards,
Hartwig
Archive: [🔎] 201407112137.58209.Hartwig.Atrops@arcor.de" target="_blank">https://lists.debian.org/[🔎] 201407112137.58209.Hartwig.Atrops@arcor.de
--
To UNSUBSCRIBE, email to debian-sparc-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
--
with regards,
k shyam prasad,
JTO,bbmp noc,
bangalore.