[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#902799: [kwin-x11] Regression: Does not start (crashes repeatedly)



Package: kwin-x11
Version: 4:5.13.1-1
Severity: grave

--- Please enter the report below this line. ---
I am writing this on a machine that's been downgraded back to 5.12.5-1, where kwin works fine.

kwin_x11 doesn't seem to have a verbose output option. I'll try to capture a useful log,
but in the meantime, this update needs to be blocked from getting into testing unless
I'm literally the only person that is experiencing this.

--- System information. ---
Architecture: Kernel:       Linux 4.17.0-trunk-amd64

--- Package information. ---
Depends                                   (Version) | Installed
===================================================-+-==========================
kwin-common                          (= 4:5.12.5-1) | 4:5.12.5-1
libkwinglutils11                     (= 4:5.12.5-1) | 4:5.12.5-1
libkwinxrenderutils11                (= 4:5.12.5-1) | 4:5.12.5-1
libc6                                     (>= 2.14) | libepoxy0                                  (>= 1.0) | libgcc1
     (>= 1:3.4) | libkf5configcore5                       (>= 4.97.0) | libkf5coreaddons5                       (>= 5.11.0) | libkf5crash5
                      (>= 4.96.0) | libkf5i18n5                             (>= 4.97.0) | libkf5quickaddons5                      (>= 5.26.0) |
libkf5waylandserver5                  (>= 4:5.22.0) | libkf5windowsystem5                     (>= 4.96.0) | libkwineffects11          (>=
4:5.1.95+git20150122) | libqt5core5a                            (>= 5.10.0) | libqt5gui5                              (>= 5.9.0~) |
libqt5widgets5                          (>= 5.9.0~) | libqt5x11extras5                         (>= 5.6.0) | libstdc++6
         (>= 5) | libx11-6                                            | libxcb-composite0                                   | libxcb-cursor0
                      (>= 0.0.99) | libxcb-keysyms1                          (>= 0.4.0) | libxcb-randr0                              (>= 1.3) |
libxcb-render0                                      | libxcb-shape0                                       | libxcb-xfixes0
                | libxcb1                                    (>= 1.6) | libxi6                              (>= 2:1.5.99.2) |

Package's Recommends field is empty.

Package's Suggests field is empty.

--- graphics card ----
# lspci -v -s 01:00.0
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Baffin [Polaris11] (rev cf) (prog-if 00 [VGA controller])
        Subsystem: Gigabyte Technology Co., Ltd Baffin [Radeon RX 550 640SP / RX 560] (Radeon RX 560)
        Flags: bus master, fast devsel, latency 0, IRQ 53
        Memory at 900000000 (64-bit, prefetchable) [size=4G]
        Memory at 880000000 (64-bit, prefetchable) [size=2M]
        I/O ports at e000 [size=256]
        Memory at f7c00000 (32-bit, non-prefetchable) [size=256K]
        Expansion ROM at 000c0000 [disabled] [size=128K]
        Capabilities: [48] Vendor Specific Information: Len=08 <?>
        Capabilities: [50] Power Management version 3
        Capabilities: [58] Express Legacy Endpoint, MSI 00
        Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
        Capabilities: [150] Advanced Error Reporting
        Capabilities: [200] #15
        Capabilities: [270] #19
        Capabilities: [2b0] Address Translation Service (ATS)
        Capabilities: [2c0] Page Request Interface (PRI)
        Capabilities: [2d0] Process Address Space ID (PASID)
        Capabilities: [320] Latency Tolerance Reporting
        Capabilities: [328] Alternative Routing-ID Interpretation (ARI)
        Capabilities: [370] L1 PM Substates
        Kernel driver in use: amdgpu
        Kernel modules: amdgpu


Reply to: