pcmcia vs. mvista rsync
hi,
i tried the mvista kernel i synced yesterday
(source.mvista.com::linuxppc_2_4_devel) but pcmcia doesn't work.
my old config.opts had this (probably not perfect but it worked)
include port 0x4000-0x40ff, port 0x4400-0x44ff
include memory 0x80000000-0x803ff000, memory 0xfd000000-0xfd3ff000
should lspci come up with new i/o ranges? i tried several different
combinations of i/o in pcmcia's config.opts but i when i insert a
card i always get the message
cs: unable to map card memory!
this is the actual difference:
--- lspci-2.4.5 Sat Sep 8 00:59:20 2001
+++ lspci-2.4.10 Sat Sep 8 01:07:40 2001
@@ -21,10 +21,10 @@
00:13.0 CardBus bridge: Texas Instruments PCI1211
Flags: bus master, medium devsel, latency 168, IRQ 22
Memory at 80880000 (32-bit, non-prefetchable) [size=4K]
- Bus: primary=00, secondary=01, subordinate=01, sec-latency=176
+ Bus: primary=00, secondary=01, subordinate=04, sec-latency=176
Memory window 0: fd000000-fd3ff000 (prefetchable)
Memory window 1: 80000000-803ff000
- I/O window 0: 00001000-000010ff
- I/O window 1: 00001400-000014ff
+ I/O window 0: 00004000-000040ff
+ I/O window 1: 00004400-000044ff
16-bit legacy interface ports at 0001
--
bcmidgle@sanluis.uccs.edu
Brad Midgley
Reply to: