Re: IrDA
In article <3B9D5711.7030406@twmi.rr.com>
tallison1@twmi.rr.com writes:
>> and syslog says:
>> executing: '/sbin/modprobe irda0'
>> nsc-ircc, Found chip at base=0x2e
>> nsc-ircc, driver loaded (Dag Brattle)
>> nsc-ircc_open(), can't get iobase of 0x2f8
>> + /lib/modules/2.2.19/misc/nsc-ircc.o: init_module: Device or resource busy
>> + /lib/modules/2.2.19/misc/nsc-ircc.o: insmod
>> /lib/modules/2.2.19/misc/nsc-ircc.o failed
It should be nsc-ircc UART emulation probrem.
Could you try the following commands?
# setserial /dev/ttyS1 uart none port 0x02f8
# /etc/init.d/irda start
--
NOKUBI Takatsugu
E-mail: knok@daionet.gr.jp
knok@namazu.org / knok@debian.org
Reply to:
- References:
- IrDA
- From: Tom Allison <tallison1@twmi.rr.com>