[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#810821: marked as done (linux-image-3.16.0-4-amd64: BCM5720 with tg3 module: transmit timed out and then resetting.)



Your message dated Sun, 02 May 2021 17:26:23 +0200
with message-id <E1ldDyx-001MkR-8g@hullmann.westfalen.local>
and subject line Closing this bug
has caused the Debian Bug report #810821,
regarding linux-image-3.16.0-4-amd64: BCM5720 with tg3 module: transmit timed out and then resetting.
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
810821: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=810821
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: src:linux
Version: 3.16.7-ckt20-1+deb8u2
Severity: important

Dear Maintainer,


This "bug" disappear when I set "tso off" like this:

  ethtool -K eth3 tso off


*** Reporter, please consider answering these questions, where appropriate ***

   * What led up to the situation?

Xen with network bridge + TSO ON.


   * What exactly did you do (or not do) that was effective (or
     ineffective)?

Normal Xen DomU TCP/IP communication: maybe a high volume network traffic...

   * What was the outcome of this action?

Ethernet interface shutdown and bridge shutdown. (see log)

   * What outcome did you expect instead?

No ethernet shutdown with TSO ON.


*** End of the template - remove these template lines ***


-- Package-specific info:
** Version:
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt20-1+deb8u2 (2016-01-02)

** Command line:
placeholder root=/dev/mapper/vg0-system ro quiet

** Tainted: W (512)
 * Taint on warning.

** Kernel log:

[45587.040797] ------------[ cut here ]------------
[45587.040817] WARNING: CPU: 0 PID: 0 at /build/linux-iKyi1u/linux-3.16.7-ckt20/net/sched/sch_generic.c:264 dev_watchdog+0x236/0x240()
[45587.040821] NETDEV WATCHDOG: eth3 (tg3): transmit queue 0 timed out
[45587.040824] Modules linked in: ipmi_si mpt3sas mpt2sas raid_class scsi_transport_sas mptctl mptbase tun xen_netback xen_blkback dell_rbu binfmt_misc xen_gntdev xen_evtchn xenfs xen_privcmd nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc ipmi_devintf iTCO_wdt iTCO_vendor_support x86_pkg_temp_thermal intel_powerclamp intel_rapl coretemp crc32_pclmul dcdbas aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd pcspkr joydev evdev ttm drm_kms_helper drm i2c_algo_bit i2c_core lpc_ich mfd_core mei_me mei ipmi_msghandler wmi acpi_power_meter processor thermal_sys shpchp button 8021q garp mrp bridge stp llc autofs4 ext4 crc16 mbcache jbd2 dm_mod sg sd_mod crc_t10dif crct10dif_generic sr_mod cdrom hid_generic usbhid hid crct10dif_pclmul crct10dif_common crc32c_intel ehci_pci ehci_hcd
[45587.040881]  usbcore usb_common ahci libahci libata tg3 ptp pps_core libphy megaraid_sas scsi_mod [last unloaded: ipmi_si]
[45587.040894] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.16.0-4-amd64 #1 Debian 3.16.7-ckt20-1+deb8u2
[45587.040896] Hardware name: Dell Inc. PowerEdge R630/0CNCJW, BIOS 1.3.6 06/03/2015
[45587.040898]  0000000000000009 ffffffff8150dacf ffff88017ba03e28 ffffffff810677d7
[45587.040902]  0000000000000000 ffff88017ba03e78 0000000000000005 0000000000000000
[45587.040905]  ffff8800023ce000 ffffffff8106783c ffffffff81778e70 ffffffff00000030
[45587.040909] Call Trace:
[45587.040911]  <IRQ>  [<ffffffff8150dacf>] ? dump_stack+0x41/0x51
[45587.040925]  [<ffffffff810677d7>] ? warn_slowpath_common+0x77/0x90
[45587.040930]  [<ffffffff8106783c>] ? warn_slowpath_fmt+0x4c/0x50
[45587.040936]  [<ffffffff81074817>] ? mod_timer+0x127/0x1e0
[45587.040944]  [<ffffffff814409a6>] ? dev_watchdog+0x236/0x240
[45587.040948]  [<ffffffff81440770>] ? dev_graft_qdisc+0x70/0x70
[45587.040953]  [<ffffffff81072b81>] ? call_timer_fn+0x31/0x100
[45587.040957]  [<ffffffff81440770>] ? dev_graft_qdisc+0x70/0x70
[45587.040962]  [<ffffffff810741b9>] ? run_timer_softirq+0x209/0x2f0
[45587.040965]  [<ffffffff8106c681>] ? __do_softirq+0xf1/0x290
[45587.040969]  [<ffffffff8106ca55>] ? irq_exit+0x95/0xa0
[45587.040976]  [<ffffffff81359d15>] ? xen_evtchn_do_upcall+0x35/0x50
[45587.040980]  [<ffffffff8151595e>] ? xen_do_hypervisor_callback+0x1e/0x30
[45587.040981]  <EOI>  [<ffffffff810013aa>] ? xen_hypercall_sched_op+0xa/0x20
[45587.040989]  [<ffffffff810013aa>] ? xen_hypercall_sched_op+0xa/0x20
[45587.040994]  [<ffffffff81009e7c>] ? xen_safe_halt+0xc/0x20
[45587.041000]  [<ffffffff8101c8c9>] ? default_idle+0x19/0xb0
[45587.041006]  [<ffffffff810a8120>] ? cpu_startup_entry+0x340/0x400
[45587.041011]  [<ffffffff81903076>] ? start_kernel+0x497/0x4a2
[45587.041015]  [<ffffffff81902a04>] ? set_init_arg+0x4e/0x4e
[45587.041020]  [<ffffffff81904f69>] ? xen_start_kernel+0x569/0x573
[45587.041022] ---[ end trace 0051dbe846306114 ]---
[45587.041027] tg3 0000:02:00.1 eth3: transmit timed out, resetting
[45588.300555] tg3 0000:02:00.1 eth3: 0x00000000: 0x165f14e4, 0x00100406, 0x02000000, 0x00800000
[45588.300599] tg3 0000:02:00.1 eth3: 0x00000010: 0x91a0000c, 0x00000000, 0x91a1000c, 0x00000000
... etc ...
[45588.354071] tg3 0000:02:00.1 eth3: 0x00007020: 0x00000000, 0x00000000, 0x00000406, 0x10004000
[45588.354142] tg3 0000:02:00.1 eth3: 0x00007030: 0x000e0000, 0x00004c88, 0x00170030, 0x00000000
[45588.354220] tg3 0000:02:00.1 eth3: 0: Host status block [00000001:000000c9:(0000:0018:0000):(0000:011d)]
[45588.354292] tg3 0000:02:00.1 eth3: 0: NAPI info [000000c9:000000c9:(013f:011d:01ff):0000:(043e:0000:0000:0000)]
[45588.354366] tg3 0000:02:00.1 eth3: 1: Host status block [00000001:00000083:(0000:0000:0000):(0a93:0000)]
[45588.354438] tg3 0000:02:00.1 eth3: 1: NAPI info [00000083:00000083:(0000:0000:01ff):0a93:(0293:0293:0000:0000)]
[45588.354512] tg3 0000:02:00.1 eth3: 2: Host status block [00000001:000000f3:(092c:0000:0000):(0000:0000)]
[45588.354584] tg3 0000:02:00.1 eth3: 2: NAPI info [000000bf:000000bf:(0000:0000:01ff):08e3:(00e3:00e3:0000:0000)]
[45588.354711] [sched_delayed] sched: RT throttling activated
[45588.458708] tg3 0000:02:00.1: tg3_stop_block timed out, ofs=1400 enable_bit=2
[45588.559004] tg3 0000:02:00.1: tg3_stop_block timed out, ofs=c00 enable_bit=2
[45588.626879] tg3 0000:02:00.1 eth3: Link is down


** Model information
sys_vendor: Dell Inc.
product_name: PowerEdge R630
product_version: 
chassis_vendor: Dell Inc.
chassis_version: 
bios_vendor: Dell Inc.
bios_version: 1.3.6
board_vendor: Dell Inc.
board_name: 0CNCJW
board_version: A05

** Loaded modules:
ipmi_si
mpt3sas
mpt2sas
raid_class
scsi_transport_sas
mptctl
mptbase
tun
xen_netback
xen_blkback
dell_rbu
binfmt_misc
xen_gntdev
xen_evtchn
xenfs
xen_privcmd
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
ipmi_devintf
iTCO_wdt
iTCO_vendor_support
x86_pkg_temp_thermal
intel_powerclamp
intel_rapl
coretemp
crc32_pclmul
dcdbas
aesni_intel
aes_x86_64
lrw
gf128mul
glue_helper
ablk_helper
cryptd
pcspkr
joydev
evdev
ttm
drm_kms_helper
drm
i2c_algo_bit
i2c_core
lpc_ich
mfd_core
mei_me
mei
ipmi_msghandler
wmi
acpi_power_meter
processor
thermal_sys
shpchp
button
8021q
garp
mrp
bridge
stp
llc
autofs4
ext4
crc16
mbcache
jbd2
dm_mod
sg
sd_mod
crc_t10dif
crct10dif_generic
sr_mod
cdrom
hid_generic
usbhid
hid
crct10dif_pclmul
crct10dif_common
crc32c_intel
ehci_pci
ehci_hcd
usbcore
usb_common
ahci
libahci
libata
tg3
ptp
pps_core
libphy
megaraid_sas
scsi_mod

** PCI devices:

... snip ...

01:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f]
	Subsystem: Dell Device [1028:1f5b]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 41
	Region 0: Memory at 91b30000 (64-bit, prefetchable) [size=64K]
	Region 2: Memory at 91b40000 (64-bit, prefetchable) [size=64K]
	Region 4: Memory at 91b50000 (64-bit, prefetchable) [size=64K]
	Expansion ROM at 92000000 [disabled] [size=256K]
	Capabilities: <access denied>
	Kernel driver in use: tg3

01:00.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f]
	Subsystem: Dell Device [1028:1f5b]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 45
	Region 0: Memory at 91b00000 (64-bit, prefetchable) [size=64K]
	Region 2: Memory at 91b10000 (64-bit, prefetchable) [size=64K]
	Region 4: Memory at 91b20000 (64-bit, prefetchable) [size=64K]
	Expansion ROM at 92040000 [disabled] [size=256K]
	Capabilities: <access denied>
	Kernel driver in use: tg3

02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f]
	Subsystem: Dell Device [1028:1f5b]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 40
	Region 0: Memory at 91a30000 (64-bit, prefetchable) [size=64K]
	Region 2: Memory at 91a40000 (64-bit, prefetchable) [size=64K]
	Region 4: Memory at 91a50000 (64-bit, prefetchable) [size=64K]
	Expansion ROM at 91f00000 [disabled] [size=256K]
	Capabilities: <access denied>
	Kernel driver in use: tg3

02:00.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f]
	Subsystem: Dell Device [1028:1f5b]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 44
	Region 0: Memory at 91a00000 (64-bit, prefetchable) [size=64K]
	Region 2: Memory at 91a10000 (64-bit, prefetchable) [size=64K]
	Region 4: Memory at 91a20000 (64-bit, prefetchable) [size=64K]
	Expansion ROM at 91f40000 [disabled] [size=256K]
	Capabilities: <access denied>
	Kernel driver in use: tg3

... snip ...



-- System Information:
Debian Release: 8.2
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 3.16.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages linux-image-3.16.0-4-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.56
ii  initramfs-tools [linux-initramfs-tool]  0.120
ii  kmod                                    18-3
ii  linux-base                              3.5

Versions of packages linux-image-3.16.0-4-amd64 recommends:
ii  firmware-linux-free  3.3
ii  irqbalance           1.0.6-3

Versions of packages linux-image-3.16.0-4-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.02~beta2-22+deb8u1
pn  linux-doc-3.16          <none>

Versions of packages linux-image-3.16.0-4-amd64 is related to:
pn  firmware-atheros                           <none>
pn  firmware-bnx2                              <none>
pn  firmware-bnx2x                             <none>
pn  firmware-brcm80211                         <none>
pn  firmware-intelwimax                        <none>
pn  firmware-ipw2x00                           <none>
pn  firmware-ivtv                              <none>
pn  firmware-iwlwifi                           <none>
pn  firmware-libertas                          <none>
pn  firmware-linux                             <none>
ii  firmware-linux-nonfree                     0.43
pn  firmware-myricom                           <none>
pn  firmware-netxen                            <none>
pn  firmware-qlogic                            <none>
pn  firmware-ralink                            <none>
pn  firmware-realtek                           <none>
ii  xen-hypervisor-4.4-amd64 [xen-hypervisor]  4.4.1-9+deb8u3

-- debconf information:
  linux-image-3.16.0-4-amd64/postinst/mips-initrd-3.16.0-4-amd64:
  linux-image-3.16.0-4-amd64/postinst/depmod-error-initrd-3.16.0-4-amd64: false
  linux-image-3.16.0-4-amd64/prerm/removing-running-kernel-3.16.0-4-amd64: true

--- End Message ---
--- Begin Message ---
This bug was filed for a very old kernel. If you can reproduce it with
- the current version in unstable/testing
- the latest kernel from buster.backports
please reopen the bug, see https://www.debian.org/Bugs/server-control

--- End Message ---

Reply to: