--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.4-trunk-686-pae: lirc / devinput remote control, only avery second keypress is recognised vs. sids 3.2 kernel where everything is ok
- From: Michael Schmitt <tcwardrobe@gmail.com>
- Date: Sat, 16 Jun 2012 16:26:24 +0200
- Message-id: <20120616142624.11863.63977.reportbug@ganymed.tcw.local>
Package: linux-2.6
Version: 3.4.1-1~experimental.1
Severity: normal
Dear Maintainers,
with the current kernel from experimental only every second keypress is
recognized on my ir remote control. Reboot to kernel 3.2 from sid, all back to
normal.
I have no idea how the kernel could be responsible there... ok, a weird bug in
the responsible kernel module for the remote, but somehow I doubt that.
If you need any lirc configs or logfiles give me a note, as right now I don't
think my lirc config does help much here.
regards
Michael
-- Package-specific info:
** Version:
Linux version 3.4-trunk-686-pae (Debian 3.4.1-1~experimental.1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-7) ) #1 SMP Wed Jun 6 15:11:31 UTC 2012
** Command line:
BOOT_IMAGE=/vmlinuz-3.4-trunk-686-pae root=UUID=a6f2436e-3ce5-411a-b013-0c345db5cf50 ro quiet
** Tainted: PO (4097)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.
** Kernel log:
[ 47.500683] IR LIRC bridge handler initialized
[ 47.540454] Bluetooth: Core ver 2.16
[ 47.540454] NET: Registered protocol family 31
[ 47.540454] Bluetooth: HCI device and connection manager initialized
[ 47.540454] Bluetooth: HCI socket layer initialized
[ 47.540454] Bluetooth: L2CAP socket layer initialized
[ 47.540454] Bluetooth: SCO socket layer initialized
[ 47.590889] usbcore: registered new interface driver btusb
[ 47.636053] mceusb 2-8:1.0: Registered FIC eHome Infrared Transceiver with mce emulator interface version 1
[ 47.636059] mceusb 2-8:1.0: 2 tx ports (0x1 cabled) and 2 rx sensors (0x1 active)
[ 47.636140] usbcore: registered new interface driver mceusb
[ 49.497914] kvm: Nested Virtualization enabled
[ 51.735525] Adding 1951804k swap on /dev/md1. Priority:-1 extents:1 across:1951804k
[ 52.240161] scsi_verify_blk_ioctl: 104 callbacks suppressed
[ 52.240166] mdadm: sending ioctl 1261 to a partition!
[ 52.240170] mdadm: sending ioctl 1261 to a partition!
[ 52.324368] EXT3-fs (md2): using internal journal
[ 53.013612] loop: module loaded
[ 53.043855] mdadm: sending ioctl 800c0910 to a partition!
[ 53.043860] mdadm: sending ioctl 800c0910 to a partition!
[ 53.043869] mdadm: sending ioctl 1261 to a partition!
[ 53.043872] mdadm: sending ioctl 1261 to a partition!
[ 53.049907] mdadm: sending ioctl 1261 to a partition!
[ 53.049912] mdadm: sending ioctl 1261 to a partition!
[ 53.050304] mdadm: sending ioctl 1261 to a partition!
[ 53.050307] mdadm: sending ioctl 1261 to a partition!
[ 56.858772] kjournald starting. Commit interval 5 seconds
[ 56.920109] EXT3-fs (md0): using internal journal
[ 56.920114] EXT3-fs (md0): mounted filesystem with ordered data mode
[ 57.932062] usb 1-1: new high-speed USB device number 7 using ehci_hcd
[ 58.065315] usb 1-1: New USB device found, idVendor=0cf3, idProduct=7015
[ 58.065320] usb 1-1: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[ 58.065324] usb 1-1: Product: UB95
[ 58.065327] usb 1-1: Manufacturer: ATHEROS
[ 58.065329] usb 1-1: SerialNumber: 12345
[ 58.400248] cfg80211: Calling CRDA to update world regulatory domain
[ 58.608067] usb 1-1: ath9k_htc: Firmware htc_7010.fw requested
[ 58.608144] usbcore: registered new interface driver ath9k_htc
[ 58.827307] usb 1-1: ath9k_htc: Transferred FW: htc_7010.fw, size: 72992
[ 58.888815] ath9k_htc 1-1:1.0: ath9k_htc: HTC initialized with 45 credits
[ 59.015800] ath9k_htc 1-1:1.0: ath9k_htc: FW Version: 1.3
[ 59.015804] ath: EEPROM regdomain: 0x809c
[ 59.015807] ath: EEPROM indicates we should expect a country code
[ 59.015810] ath: doing EEPROM country->regdmn map search
[ 59.015812] ath: country maps to regdmn code: 0x52
[ 59.015815] ath: Country alpha2 being used: CN
[ 59.015817] ath: Regpair used: 0x52
[ 59.236055] ieee80211 phy0: Atheros AR9287 Rev:2
[ 59.236966] Registered led device: ath9k_htc-phy0
[ 59.485046] cfg80211: World regulatory domain updated:
[ 59.485051] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 59.485056] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 59.485060] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 59.485064] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 59.485068] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 59.485071] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 59.485323] cfg80211: Calling CRDA for country: CN
[ 59.500271] cfg80211: Regulatory domain changed to country: CN
[ 59.500276] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 59.500280] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 59.500283] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[ 59.724226] udevd[421]: renamed network interface wlan0 to wlan2
[ 60.009392] RPC: Registered named UNIX socket transport module.
[ 60.009392] RPC: Registered udp transport module.
[ 60.009392] RPC: Registered tcp transport module.
[ 60.009392] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 60.301034] FS-Cache: Loaded
[ 60.392679] NFS: Registering the id_resolver key type
[ 60.392704] FS-Cache: Netfs 'nfs' registered for caching
[ 60.412034] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 61.081976] fuse init (API version 7.18)
[ 65.818825] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input14
[ 67.644452] apm: BIOS not found.
[ 68.804143] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 68.804148] Bluetooth: BNEP filters: protocol multicast
[ 68.957801] Bluetooth: RFCOMM TTY layer initialized
[ 68.957801] Bluetooth: RFCOMM socket layer initialized
[ 68.957801] Bluetooth: RFCOMM ver 1.11
[ 69.025813] lp: driver loaded but no devices found
[ 69.139106] ppdev: user-space parallel port driver
[ 72.839311] ADDRCONF(NETDEV_UP): wlan2: link is not ready
[ 72.853437] forcedeth 0000:00:14.0: eth1: no link during initialization
[ 72.854812] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 75.308847] wlan2: authenticate with bc:05:43:ca:20:97
[ 75.408948] wlan2: send auth to bc:05:43:ca:20:97 (try 1/3)
[ 75.411945] wlan2: authenticated
[ 75.464034] wlan2: associate with bc:05:43:ca:20:97 (try 1/3)
[ 75.468099] wlan2: RX AssocResp from bc:05:43:ca:20:97 (capab=0x431 status=0 aid=2)
[ 75.468103] wlan2: associated
[ 75.523492] ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready
[ 78.100115] Ebtables v2.0 registered
[ 78.453578] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 78.590719] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 78.696344] NET: Registered protocol family 3
[ 78.870931] NET: Registered protocol family 6
[ 78.952464] NET: Registered protocol family 11
[ 79.422886] NET: Registered protocol family 4
[ 79.481004] NET: Registered protocol family 5
[ 86.208016] wlan2: no IPv6 routers present
[ 105.212468] colord[3215]: segfault at 8 ip 08052674 sp bff9d790 error 4 in colord[8048000+20000]
** Model information
not available
** Loaded modules:
appletalk
ipx
p8023
rose
netrom
ax25
ip6table_filter
ip6_tables
iptable_filter
ip_tables
ebtable_nat
ebtables
x_tables
cpufreq_conservative
cpufreq_userspace
cpufreq_powersave
cpufreq_stats
cryptd
aes_i586
aes_generic
parport_pc
ppdev
lp
parport
rfcomm
bnep
binfmt_misc
uinput
fuse
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
arc4
ath9k_htc
ath9k_common
ath9k_hw
ath
mac80211
cfg80211
dm_crypt
loop
firewire_sbp2
kvm_amd
kvm
btusb
bluetooth
ir_lirc_codec
lirc_dev
ir_mce_kbd_decoder
ir_sanyo_decoder
ir_sony_decoder
ir_jvc_decoder
ir_rc6_decoder
ir_rc5_decoder
ir_nec_decoder
rc_rc6_mce
rfkill
crc16
mceusb
rc_core
snd_hda_codec_realtek
nvidia(PO)
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_page_alloc
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
joydev
snd_seq
powernow_k8
snd_seq_device
snd_timer
nv_tco
mperf
i2c_nforce2
snd
soundcore
psmouse
evdev
i2c_core
pcspkr
serio_raw
k8temp
ac
battery
video
power_supply
processor
button
ext3
mbcache
jbd
dm_mod
raid1
md_mod
sd_mod
crc_t10dif
sr_mod
cdrom
ata_generic
pata_amd
sata_nv
ohci_hcd
firewire_ohci
libata
firewire_core
crc_itu_t
ehci_hcd
scsi_mod
forcedeth
usbcore
usb_common
thermal
fan
thermal_sys
** PCI devices:
00:00.0 RAM memory [0500]: NVIDIA Corporation C51 Host Bridge [10de:02f7] (rev a2)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:00.1 RAM memory [0500]: NVIDIA Corporation C51 Memory Controller 0 [10de:02fa] (rev a2)
Subsystem: Fujitsu Technology Solutions Device [1734:10d4]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx-
00:00.2 RAM memory [0500]: NVIDIA Corporation C51 Memory Controller 1 [10de:02fe] (rev a2)
Subsystem: Fujitsu Technology Solutions Device [1734:10d4]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:00.3 RAM memory [0500]: NVIDIA Corporation C51 Memory Controller 5 [10de:02f8] (rev a2)
Subsystem: Fujitsu Technology Solutions Device [1734:10d4]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:00.4 RAM memory [0500]: NVIDIA Corporation C51 Memory Controller 4 [10de:02f9] (rev a2)
Subsystem: Fujitsu Technology Solutions Device [1734:10d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.5 RAM memory [0500]: NVIDIA Corporation C51 Host Bridge [10de:02ff] (rev a2)
Subsystem: Fujitsu Technology Solutions Device [1734:10d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:00.6 RAM memory [0500]: NVIDIA Corporation C51 Memory Controller 3 [10de:027f] (rev a2)
Subsystem: Fujitsu Technology Solutions Device [1734:10d4]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:00.7 RAM memory [0500]: NVIDIA Corporation C51 Memory Controller 2 [10de:027e] (rev a2)
Subsystem: Fujitsu Technology Solutions Device [1734:10d4]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:02.0 PCI bridge [0604]: NVIDIA Corporation C51 PCI Express Bridge [10de:02fc] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: c0200000-c03fffff
Prefetchable memory behind bridge: 00000000c3200000-00000000c33fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:03.0 PCI bridge [0604]: NVIDIA Corporation C51 PCI Express Bridge [10de:02fd] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 80000000-801fffff
Prefetchable memory behind bridge: 0000000080200000-00000000803fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:04.0 PCI bridge [0604]: NVIDIA Corporation C51 PCI Express Bridge [10de:02fb] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: c1000000-c2ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:09.0 RAM memory [0500]: NVIDIA Corporation MCP51 Host Bridge [10de:0270] (rev a2)
Subsystem: Fujitsu Technology Solutions Device [1734:10d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:0a.0 ISA bridge [0601]: NVIDIA Corporation MCP51 LPC Bridge [10de:0260] (rev a3)
Subsystem: NVIDIA Corporation Device [10de:cb84]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:0a.1 SMBus [0c05]: NVIDIA Corporation MCP51 SMBus [10de:0264] (rev a3)
Subsystem: Fujitsu Technology Solutions Device [1734:10d4]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 4: I/O ports at 3040 [size=64]
Region 5: I/O ports at 3000 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
00:0a.3 Co-processor [0b40]: NVIDIA Corporation MCP51 PMU [10de:0271] (rev a3)
Subsystem: Fujitsu Technology Solutions Device [1734:10d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 11
Region 0: Memory at c0040000 (32-bit, non-prefetchable) [size=256K]
00:0b.0 USB controller [0c03]: NVIDIA Corporation MCP51 USB Controller [10de:026d] (rev a3) (prog-if 10 [OHCI])
Subsystem: NVIDIA Corporation Device [10de:cb84]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at c0004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:0b.1 USB controller [0c03]: NVIDIA Corporation MCP51 USB Controller [10de:026e] (rev a3) (prog-if 20 [EHCI])
Subsystem: NVIDIA Corporation Device [10de:cb84]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 23
Region 0: Memory at c0005000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:0d.0 IDE interface [0101]: NVIDIA Corporation MCP51 IDE [10de:0265] (rev f1) (prog-if 8a [Master SecP PriP])
Subsystem: Fujitsu Technology Solutions Device [1734:10d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at 3080 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_amd
00:0e.0 IDE interface [0101]: NVIDIA Corporation MCP51 Serial ATA Controller [10de:0266] (rev f1) (prog-if 85 [Master SecO PriO])
Subsystem: Fujitsu Technology Solutions Device [1734:10d4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at 30b0 [size=8]
Region 1: I/O ports at 30a4 [size=4]
Region 2: I/O ports at 30a8 [size=8]
Region 3: I/O ports at 30a0 [size=4]
Region 4: I/O ports at 3090 [size=16]
Region 5: Memory at c0006000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
00:10.0 PCI bridge [0604]: NVIDIA Corporation MCP51 PCI Bridge [10de:026f] (rev a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=07, subordinate=07, sec-latency=64
I/O behind bridge: 00006000-00006fff
Memory behind bridge: c3000000-c30fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR+
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:10.1 Audio device [0403]: NVIDIA Corporation MCP51 High Definition Audio [10de:026c] (rev a2)
Subsystem: Fujitsu Technology Solutions Device [1734:10d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin B routed to IRQ 19
Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.0 Bridge [0680]: NVIDIA Corporation MCP51 Ethernet Controller [10de:0269] (rev a3)
Subsystem: Fujitsu Technology Solutions Device [1734:10d4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 17
Region 0: Memory at c0007000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 30b8 [size=8]
Capabilities: <access denied>
Kernel driver in use: forcedeth
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
05:00.0 VGA compatible controller [0300]: NVIDIA Corporation G73 [GeForce Go 7600] [10de:0398] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Fujitsu Technology Solutions Device [1734:10d4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c2000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at c1000000 (64-bit, non-prefetchable) [size=16M]
Region 5: I/O ports at 5000 [size=128]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: nvidia
07:06.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev c0) (prog-if 10 [OHCI])
Subsystem: Fujitsu Technology Solutions Device [1734:10d4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at c3000000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at 6000 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 001 Device 007: ID 0cf3:7015 Atheros Communications, Inc. TP-Link TL-WN821N v3 802.11n [Atheros AR7010+AR9287]
Bus 001 Device 004: ID 0bf8:100f Fujitsu Siemens Computers miniCard D2301 802.11bg Wireless Module [SiS 163U]
Bus 002 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 002 Device 003: ID 1509:9242 First International Computer, Inc. eHome Infrared Transceiver
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'stable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 3.4-trunk-686-pae (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.4-trunk-686-pae depends on:
ii debconf [debconf-2.0] 1.5.43
ii initramfs-tools [linux-initramfs-tool] 0.106
ii kmod 8-2
ii linux-base 3.5
ii module-init-tools 8-2
Versions of packages linux-image-3.4-trunk-686-pae recommends:
ii firmware-linux-free 3
ii libc6-i686 2.13-33
Versions of packages linux-image-3.4-trunk-686-pae suggests:
ii grub-pc 1.99-22.1
pn linux-doc-3.4 <none>
Versions of packages linux-image-3.4-trunk-686-pae is related to:
ii firmware-atheros 0.36
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.36
ii firmware-linux-nonfree 0.36
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-ralink 0.36
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information excluded
--- End Message ---