[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#685713: marked as done ([kirkwood] decompressor doesn't disable l2 cache (need workaround for uboot bug#658904))

Your message dated Sat, 01 May 2021 05:39:21 -0700 (PDT)
with message-id <608d4bf9.1c69fb81.38188.b2ac@mx.google.com>
and subject line Closing this bug (BTS maintenance for src:linux bugs)
has caused the Debian Bug report #658759,
regarding [kirkwood] decompressor doesn't disable l2 cache (need workaround for uboot bug#658904)
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
658759: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=658759
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Subject: linux-image-3.2.0-0.bpo.2-kirkwood: fails to boot on SheevaPlug
Package: src:linux
Version: 3.2.20-1~bpo60+1 
Severity: important

*** Please type your report below this line ***

Linux version 3.2.0-0.bpo.2-kirkwood fails to boot on the SheevaPlug.

The kernel and initramfs are loaded from a USB stick.

Here's what I'm doing in u-boot:

==
Marvell>> usb start
(Re)start USB...
USB:   Register 10011 NbrPorts 1
USB EHCI 1.00
scanning bus for devices... 4 USB Device(s) found
       scanning bus for storage devices... 2 Storage Device(s) found
Marvell>> ext2load usb 0:1 0x900000 /uImage
Loading file "/uImage" from usb device 0:1 (usbda1)
1624808 bytes read
Marvell>> ext2load usb 0:1 0xe00000 /uInitrd
Loading file "/uInitrd" from usb device 0:1 (usbda1)
3097319 bytes read
Marvell>> bootm 0x900000 0xe00000
## Booting kernel from Legacy Image at 00900000 ...
   Image Name:   Debian kernel
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1624744 Bytes = 1.5 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 00e00000 ...
   Image Name:   Debian ramdisk
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    3097255 Bytes = 3 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.

==

And nothing happens.

-- Package-specific info:
** Kernel log: boot messages should be attached


-- System Information:
Debian Release: 6.0.5
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: armel (armv5tel)

Kernel: Linux 2.6.39-bpo.2-kirkwood
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.2.0-0.bpo.2-kirkwood depends on:
ii  debconf [debconf-2.0]       1.5.36.1     Debian configuration management sy
ii  initramfs-tools [linux-init 0.99~bpo60+1 tools for generating an initramfs
ii  linux-base                  3.4~bpo60+1  Linux image base package
ii  module-init-tools           3.12-2       tools for managing Linux kernel mo

Versions of packages linux-image-3.2.0-0.bpo.2-kirkwood recommends:
pn  firmware-linux-free           <none>     (no description available)
pn  uboot-mkimage                 <none>     (no description available)

Versions of packages linux-image-3.2.0-0.bpo.2-kirkwood suggests:
pn  fdutils                       <none>     (no description available)
pn  linux-doc-3.2                 <none>     (no description available)

Versions of packages linux-image-3.2.0-0.bpo.2-kirkwood is related to:
pn  firmware-atheros              <none>     (no description available)
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-brcm80211            <none>     (no description available)
pn  firmware-intelwimax           <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
pn  firmware-libertas             <none>     (no description available)
pn  firmware-linux                <none>     (no description available)
pn  firmware-linux-nonfree        <none>     (no description available)
pn  firmware-myricom              <none>     (no description available)
pn  firmware-netxen               <none>     (no description available)
pn  firmware-qlogic               <none>     (no description available)
pn  firmware-ralink               <none>     (no description available)
pn  firmware-realtek              <none>     (no description available)
pn  xen-hypervisor                <none>     (no description available)

-- debconf information:
  linux-image-3.2.0-0.bpo.2-kirkwood/postinst/missing-firmware-3.2.0-0.bpo.2-kirkwood:
  linux-image-3.2.0-0.bpo.2-kirkwood/postinst/ignoring-ramdisk:
  linux-image-3.2.0-0.bpo.2-kirkwood/prerm/removing-running-kernel-3.2.0-0.bpo.2-kirkwood: true
  linux-image-3.2.0-0.bpo.2-kirkwood/postinst/depmod-error-initrd-3.2.0-0.bpo.2-kirkwood: false

--- End Message ---
--- Begin Message --- 
Hi

This bug was filed for a very old kernel or the bug is old itself
without resolution.

If you can reproduce it with

- the current version in unstable/testing
- the latest kernel from backports

please reopen the bug, see https://www.debian.org/Bugs/server-control
for details.

Regards,
Salvatore

--- End Message ---
Reply to: