--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: e1000 WARNING and INFO: task kworker blocked for more than ..
- From: Edward Allcutt <edward@allcutt.me.uk>
- Date: Sun, 25 Mar 2012 08:36:52 +0100
- Message-id: <20120325073651.2248.49164.reportbug@jago.allcutt.me.uk>
Package: linux-2.6
Version: 3.2.12-1
Severity: important
Just updated linux kernel from 3.2.9-1 to 3.2.12-1. On ifup, after a seemingly successful
DHCP REQUEST+ACK networking completely fell over. The "no IPv6 routers" log line is notable
since there is working native IPv6 here. The first noticable symptom however was DNS
requests failing.
Subsequently, netlink requests seemed to hang: "ip address show" blocked indefinitely. Rebooting
blocked after the usual "Rebooting the system" message, there were some task hung warnings and
I forced it to reboot with sysrq.
I've fallen back to the previous ABI kernel, so the Kernel: line below is wrong. Manually added
kernel logs since reportbug can't read them as normal user. Obviously missing messages after
klogd was killed.
It gets interesting from 360 onwards, I started the reboot before 480.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-2-486 (Debian 3.2.12-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-1) ) #1 Tue Mar 20 18:45:21 UTC 2012
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001f6e0000 (usable)
[ 0.000000] BIOS-e820: 000000001f6e0000 - 000000001f6f7000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001f6f7000 - 000000001f6f9000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001f700000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI present.
[ 0.000000] DMI: IBM 2386H6G/2386H6G, BIOS 1UETD3WW (2.08 ) 12/21/2006
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x1f6e0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DBFFF uncachable
[ 0.000000] DC000-DFFFF write-back
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 01FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] Base memory trampoline at [c009c000] 9c000 size 12288
[ 0.000000] init_memory_mapping: 0000000000000000-000000001f6e0000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 001f400000 page 2M
[ 0.000000] 001f400000 - 001f6e0000 page 4k
[ 0.000000] kernel direct mapping tables up to 1f6e0000 @ 17fb000-1800000
[ 0.000000] RAMDISK: 1e6b6000 - 1efbc000
[ 0.000000] ACPI: RSDP 000f6d10 00024 (v02 IBM )
[ 0.000000] ACPI: XSDT 1f6e7e57 00054 (v01 IBM TP-1U 00002080 LTP 00000000)
[ 0.000000] ACPI: FACP 1f6e7f00 000F4 (v03 IBM TP-1U 00002080 IBM 00000001)
[ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20110623/tbfadt-529)
[ 0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20110623/tbfadt-560)
[ 0.000000] ACPI: DSDT 1f6e80e7 0ECE9 (v01 IBM TP-1U 00002080 MSFT 0100000E)
[ 0.000000] ACPI: FACS 1f6f8000 00040
[ 0.000000] ACPI: SSDT 1f6e80b4 00033 (v01 IBM TP-1U 00002080 MSFT 0100000E)
[ 0.000000] ACPI: ECDT 1f6f6dd0 00052 (v01 IBM TP-1U 00002080 IBM 00000001)
[ 0.000000] ACPI: TCPA 1f6f6e22 00032 (v01 IBM TP-1U 00002080 PTL 00000001)
[ 0.000000] ACPI: APIC 1f6f6e54 0005A (v01 IBM TP-1U 00002080 IBM 00000001)
[ 0.000000] ACPI: BOOT 1f6f6fd8 00028 (v01 IBM TP-1U 00002080 LTP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 502MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1f6e0000
[ 0.000000] low ram: 0 - 1f6e0000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001f6e0
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001f6e0
[ 0.000000] On node 0 totalpages: 128623
[ 0.000000] free_area_init_node: node 0, pgdat c13cb578, node_mem_map df2ef200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 974 pages used for memmap
[ 0.000000] Normal zone: 123666 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 127617
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-486 root=UUID=43c39ab8-a297-45d5-a2f6-4fd419c58689 ro quiet
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 495872k/514944k available (2589k kernel code, 18620k reserved, 1325k data, 448k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffa1000 - 0xfffff000 ( 376 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xdfee0000 - 0xff7fe000 ( 505 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf6e0000 ( 502 MB)
[ 0.000000] .init : 0xc13d3000 - 0xc1443000 ( 448 kB)
[ 0.000000] .data : 0xc128766c - 0xc13d2e00 (1325 kB)
[ 0.000000] .text : 0xc1000000 - 0xc128766c (2589 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=de008000 soft=de00a000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1395.666 MHz processor.
[ 0.008003] Calibrating delay loop (skipped), value calculated using timer frequency.. 2791.33 BogoMIPS (lpj=5582664)
[ 0.008009] pid_max: default: 32768 minimum: 301
[ 0.012039] Security Framework initialized
[ 0.012047] AppArmor: AppArmor disabled by boot time parameter
[ 0.012064] Mount-cache hash table entries: 512
[ 0.012200] Initializing cgroup subsys cpuacct
[ 0.012205] Initializing cgroup subsys memory
[ 0.012216] Initializing cgroup subsys devices
[ 0.012220] Initializing cgroup subsys freezer
[ 0.012223] Initializing cgroup subsys net_cls
[ 0.012226] Initializing cgroup subsys blkio
[ 0.012236] Initializing cgroup subsys perf_event
[ 0.012267] Disabled fast string operations
[ 0.012287] CPU: Intel(R) Pentium(R) M processor 1.40GHz stepping 06
[ 0.012906] ACPI: Core revision 20110623
[ 0.024055] Performance Events: p6 PMU driver.
[ 0.024063] ... version: 0
[ 0.024066] ... bit width: 32
[ 0.024069] ... generic registers: 2
[ 0.024071] ... value mask: 00000000ffffffff
[ 0.024074] ... max period: 000000007fffffff
[ 0.024077] ... fixed-purpose events: 0
[ 0.024079] ... event mask: 0000000000000003
[ 0.024261] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.024286] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.024617] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068003] devtmpfs: initialized
[ 0.068003] PM: Registering ACPI NVS region at 1f6f7000 (8192 bytes)
[ 0.068003] print_constraints: dummy:
[ 0.068003] NET: Registered protocol family 16
[ 0.068003] EISA bus registered
[ 0.068003] ACPI: bus type pci registered
[ 0.068003] PCI: PCI BIOS revision 2.10 entry at 0xfd8c8, last bus=5
[ 0.068003] PCI: Using configuration type 1 for base access
[ 0.068003] bio: create slab <bio-0> at 0
[ 0.068003] ACPI: Added _OSI(Module Device)
[ 0.068003] ACPI: Added _OSI(Processor Device)
[ 0.068003] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.068003] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.068003] ACPI: EC: EC description table is found, configuring boot EC
[ 0.202914] ACPI: Interpreter enabled
[ 0.202924] ACPI: (supports S0 S3 S4 S5)
[ 0.202954] ACPI: Using IOAPIC for interrupt routing
[ 0.205452] ACPI: Power Resource [PUBS] (on)
[ 0.209140] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.213373] ACPI: ACPI Dock Station Driver: 5 docks/bays found
[ 0.213377] HEST: Table not found.
[ 0.213384] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.213878] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.214860] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.214865] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.214870] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.214875] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[ 0.214879] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.214884] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.214889] pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xfebfffff] (ignored)
[ 0.214905] pci 0000:00:00.0: [8086:3580] type 0 class 0x000600
[ 0.214953] pci 0000:00:00.1: [8086:3584] type 0 class 0x000880
[ 0.214998] pci 0000:00:00.3: [8086:3585] type 0 class 0x000880
[ 0.215048] pci 0000:00:02.0: [8086:3582] type 0 class 0x000300
[ 0.215060] pci 0000:00:02.0: reg 10: [mem 0xe0000000-0xe7ffffff pref]
[ 0.215068] pci 0000:00:02.0: reg 14: [mem 0xd0000000-0xd007ffff]
[ 0.215076] pci 0000:00:02.0: reg 18: [io 0x1800-0x1807]
[ 0.215108] pci 0000:00:02.0: supports D1
[ 0.215121] pci 0000:00:02.1: [8086:3582] type 0 class 0x000380
[ 0.215132] pci 0000:00:02.1: reg 10: [mem 0xe8000000-0xefffffff pref]
[ 0.215140] pci 0000:00:02.1: reg 14: [mem 0xd0080000-0xd00fffff]
[ 0.215175] pci 0000:00:02.1: supports D1
[ 0.215219] pci 0000:00:1d.0: [8086:24c2] type 0 class 0x000c03
[ 0.216034] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
[ 0.216069] pci 0000:00:1d.1: [8086:24c4] type 0 class 0x000c03
[ 0.216112] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
[ 0.216147] pci 0000:00:1d.2: [8086:24c7] type 0 class 0x000c03
[ 0.216189] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
[ 0.216234] pci 0000:00:1d.7: [8086:24cd] type 0 class 0x000c03
[ 0.216255] pci 0000:00:1d.7: reg 10: [mem 0xd0100000-0xd01003ff]
[ 0.216343] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.216350] pci 0000:00:1d.7: PME# disabled
[ 0.216368] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.216412] pci 0000:00:1f.0: [8086:24cc] type 0 class 0x000601
[ 0.216475] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH4 ACPI/GPIO/TCO
[ 0.216482] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH4 GPIO
[ 0.216501] pci 0000:00:1f.1: [8086:24ca] type 0 class 0x000101
[ 0.216515] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.216526] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.216537] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.216548] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.216558] pci 0000:00:1f.1: reg 20: [io 0x1810-0x181f]
[ 0.216569] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
[ 0.216599] pci 0000:00:1f.3: [8086:24c3] type 0 class 0x000c05
[ 0.216641] pci 0000:00:1f.3: reg 20: [io 0x1880-0x189f]
[ 0.216680] pci 0000:00:1f.5: [8086:24c5] type 0 class 0x000401
[ 0.216695] pci 0000:00:1f.5: reg 10: [io 0x1c00-0x1cff]
[ 0.216705] pci 0000:00:1f.5: reg 14: [io 0x18c0-0x18ff]
[ 0.216716] pci 0000:00:1f.5: reg 18: [mem 0xd0100c00-0xd0100dff]
[ 0.216726] pci 0000:00:1f.5: reg 1c: [mem 0xd0100800-0xd01008ff]
[ 0.216769] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.216774] pci 0000:00:1f.5: PME# disabled
[ 0.216791] pci 0000:00:1f.6: [8086:24c6] type 0 class 0x000703
[ 0.216806] pci 0000:00:1f.6: reg 10: [io 0x2400-0x24ff]
[ 0.216816] pci 0000:00:1f.6: reg 14: [io 0x2000-0x207f]
[ 0.216871] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.216877] pci 0000:00:1f.6: PME# disabled
[ 0.216906] pci 0000:02:00.0: [1180:0476] type 2 class 0x000607
[ 0.216923] pci 0000:02:00.0: reg 10: [mem 0xb0000000-0xb0000fff]
[ 0.216947] pci 0000:02:00.0: supports D1 D2
[ 0.216951] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.216956] pci 0000:02:00.0: PME# disabled
[ 0.216973] pci 0000:02:00.1: [1180:0822] type 0 class 0x000805
[ 0.216989] pci 0000:02:00.1: reg 10: [mem 0xd0221000-0xd02210ff]
[ 0.217051] pci 0000:02:00.1: supports D1 D2
[ 0.217054] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.217060] pci 0000:02:00.1: PME# disabled
[ 0.217086] pci 0000:02:01.0: [8086:1077] type 0 class 0x000200
[ 0.217104] pci 0000:02:01.0: reg 10: [mem 0xd0200000-0xd021ffff]
[ 0.217122] pci 0000:02:01.0: reg 18: [io 0x7000-0x703f]
[ 0.217182] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
[ 0.217187] pci 0000:02:01.0: PME# disabled
[ 0.217206] pci 0000:02:02.0: [8086:4220] type 0 class 0x000280
[ 0.217223] pci 0000:02:02.0: reg 10: [mem 0xd0220000-0xd0220fff]
[ 0.217289] pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
[ 0.217295] pci 0000:02:02.0: PME# disabled
[ 0.217330] pci 0000:00:1e.0: PCI bridge to [bus 02-05] (subtractive decode)
[ 0.217337] pci 0000:00:1e.0: bridge window [io 0x3000-0x7fff]
[ 0.217343] pci 0000:00:1e.0: bridge window [mem 0xd0200000-0xdfffffff]
[ 0.217349] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff pref]
[ 0.217353] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.217358] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.217396] pci_bus 0000:00: on NUMA node 0
[ 0.217401] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.217519] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.217634] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.222085] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.222202] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.222317] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.222431] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.222545] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.222659] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.222749] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.222865] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.222993] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.223003] vgaarb: loaded
[ 0.223006] vgaarb: bridge control possible 0000:00:02.0
[ 0.223070] PCI: Using ACPI for IRQ routing
[ 0.223156] PCI: pci_cache_line_size set to 64 bytes
[ 0.223220] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 0.223224] reserve RAM buffer: 000000001f6e0000 - 000000001fffffff
[ 0.225243] pnp: PnP ACPI init
[ 0.225264] ACPI: bus type pnp registered
[ 0.225901] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.225906] pnp 00:00: [mem 0x000c0000-0x000c3fff]
[ 0.225909] pnp 00:00: [mem 0x000c4000-0x000c7fff]
[ 0.225913] pnp 00:00: [mem 0x000c8000-0x000cbfff]
[ 0.225917] pnp 00:00: [mem 0x000cc000-0x000cffff]
[ 0.225921] pnp 00:00: [mem 0x000d0000-0x000cffff disabled]
[ 0.225925] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled]
[ 0.225929] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled]
[ 0.225932] pnp 00:00: [mem 0x000dc000-0x000dffff]
[ 0.225936] pnp 00:00: [mem 0x000e0000-0x000e3fff]
[ 0.225940] pnp 00:00: [mem 0x000e4000-0x000e7fff]
[ 0.225943] pnp 00:00: [mem 0x000e8000-0x000ebfff]
[ 0.225947] pnp 00:00: [mem 0x000ec000-0x000effff]
[ 0.225951] pnp 00:00: [mem 0x000f0000-0x000fffff]
[ 0.225954] pnp 00:00: [mem 0x00100000-0x01fdffff]
[ 0.225958] pnp 00:00: [mem 0xfec00000-0xffffffff]
[ 0.226038] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.226044] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.226049] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.226053] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.226058] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
[ 0.226063] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.226068] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.226073] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.226078] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.226083] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.226088] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.226093] system 00:00: [mem 0x00100000-0x01fdffff] could not be reserved
[ 0.226098] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.226103] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.226582] pnp 00:01: [bus 00-ff]
[ 0.226586] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.226590] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.226594] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.226598] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.226602] pnp 00:01: [mem 0x000c0000-0x000c3fff window]
[ 0.226606] pnp 00:01: [mem 0x000c4000-0x000c7fff window]
[ 0.226610] pnp 00:01: [mem 0x000c8000-0x000cbfff window]
[ 0.226614] pnp 00:01: [mem 0x000cc000-0x000cffff window]
[ 0.226618] pnp 00:01: [mem 0x000d0000-0x000d3fff window]
[ 0.226622] pnp 00:01: [mem 0x000d4000-0x000d7fff window]
[ 0.226626] pnp 00:01: [mem 0x000d8000-0x000dbfff window]
[ 0.226630] pnp 00:01: [mem 0x000dc000-0x000dffff window]
[ 0.226634] pnp 00:01: [mem 0x000e0000-0x000e3fff window]
[ 0.226638] pnp 00:01: [mem 0x000e4000-0x000e7fff window]
[ 0.226641] pnp 00:01: [mem 0x000e8000-0x000ebfff window]
[ 0.226645] pnp 00:01: [mem 0x000ec000-0x000effff window]
[ 0.226649] pnp 00:01: [mem 0x000f0000-0x000fffff window]
[ 0.226653] pnp 00:01: [mem 0x20000000-0xfebfffff window]
[ 0.226657] pnp 00:01: [mem 0x00000000 window]
[ 0.226711] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.226737] pnp 00:02: [io 0x0010-0x001f]
[ 0.226741] pnp 00:02: [io 0x0090-0x009f]
[ 0.226744] pnp 00:02: [io 0x0024-0x0025]
[ 0.226748] pnp 00:02: [io 0x0028-0x0029]
[ 0.226751] pnp 00:02: [io 0x002c-0x002d]
[ 0.226754] pnp 00:02: [io 0x0030-0x0031]
[ 0.226758] pnp 00:02: [io 0x0034-0x0035]
[ 0.226761] pnp 00:02: [io 0x0038-0x0039]
[ 0.226765] pnp 00:02: [io 0x003c-0x003d]
[ 0.226768] pnp 00:02: [io 0x00a4-0x00a5]
[ 0.226771] pnp 00:02: [io 0x00a8-0x00a9]
[ 0.226779] pnp 00:02: [io 0x00ac-0x00ad]
[ 0.226783] pnp 00:02: [io 0x00b0-0x00b5]
[ 0.226786] pnp 00:02: [io 0x00b8-0x00b9]
[ 0.226789] pnp 00:02: [io 0x00bc-0x00bd]
[ 0.226793] pnp 00:02: [io 0x004e-0x004f]
[ 0.226796] pnp 00:02: [io 0x0050-0x0053]
[ 0.226800] pnp 00:02: [io 0x0072-0x0077]
[ 0.226803] pnp 00:02: [io 0x002e-0x002f]
[ 0.226807] pnp 00:02: [io 0x1000-0x107f]
[ 0.226810] pnp 00:02: [io 0x1180-0x11bf]
[ 0.226813] pnp 00:02: [io 0x15e0-0x15ef]
[ 0.226817] pnp 00:02: [io 0x1600-0x167f]
[ 0.226820] pnp 00:02: [io 0x1680-0x169f]
[ 0.226915] system 00:02: [io 0x1000-0x107f] has been reserved
[ 0.226921] system 00:02: [io 0x1180-0x11bf] has been reserved
[ 0.226925] system 00:02: [io 0x15e0-0x15ef] has been reserved
[ 0.226930] system 00:02: [io 0x1600-0x167f] has been reserved
[ 0.226935] system 00:02: [io 0x1680-0x169f] has been reserved
[ 0.226939] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.226961] pnp 00:03: [io 0x0000-0x000f]
[ 0.226964] pnp 00:03: [io 0x0080-0x008f]
[ 0.226968] pnp 00:03: [io 0x00c0-0x00df]
[ 0.226972] pnp 00:03: [dma 4]
[ 0.227012] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.227026] pnp 00:04: [io 0x0061]
[ 0.227066] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.227080] pnp 00:05: [io 0x00f0]
[ 0.227093] pnp 00:05: [irq 13]
[ 0.227136] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.227151] pnp 00:06: [io 0x0070-0x0071]
[ 0.227157] pnp 00:06: [irq 8]
[ 0.227199] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.227214] pnp 00:07: [io 0x0060]
[ 0.227218] pnp 00:07: [io 0x0064]
[ 0.227224] pnp 00:07: [irq 1]
[ 0.227267] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.227284] pnp 00:08: [irq 12]
[ 0.227328] pnp 00:08: Plug and Play ACPI device, IDs IBM3780 PNP0f13 (active)
[ 0.227725] pnp 00:09: Plug and Play ACPI device, IDs IBM0071 PNP0511 (disabled)
[ 0.228550] pnp: PnP ACPI: found 10 devices
[ 0.228553] ACPI: ACPI bus type pnp unregistered
[ 0.228557] PnPBIOS: Disabled by ACPI PNP
[ 0.266046] Switching to clocksource acpi_pm
[ 0.266062] PCI: max bus depth: 2 pci_try_num: 3
[ 0.266081] pci 0000:00:1f.1: BAR 5: assigned [mem 0x20000000-0x200003ff]
[ 0.266090] pci 0000:00:1f.1: BAR 5: set to [mem 0x20000000-0x200003ff] (PCI address [0x20000000-0x200003ff])
[ 0.266098] pci 0000:02:00.0: BAR 16: assigned [mem 0xd4000000-0xd7ffffff]
[ 0.266103] pci 0000:02:00.0: BAR 15: assigned [mem 0xf0000000-0xf3ffffff pref]
[ 0.266107] pci 0000:02:00.0: BAR 14: assigned [io 0x3000-0x30ff]
[ 0.266112] pci 0000:02:00.0: BAR 13: assigned [io 0x3400-0x34ff]
[ 0.266116] pci 0000:02:00.0: CardBus bridge to [bus 03-04]
[ 0.266120] pci 0000:02:00.0: bridge window [io 0x3400-0x34ff]
[ 0.266126] pci 0000:02:00.0: bridge window [io 0x3000-0x30ff]
[ 0.266132] pci 0000:02:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref]
[ 0.266138] pci 0000:02:00.0: bridge window [mem 0xd4000000-0xd7ffffff]
[ 0.266143] pci 0000:00:1e.0: PCI bridge to [bus 02-05]
[ 0.266148] pci 0000:00:1e.0: bridge window [io 0x3000-0x7fff]
[ 0.266155] pci 0000:00:1e.0: bridge window [mem 0xd0200000-0xdfffffff]
[ 0.266161] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff pref]
[ 0.266176] pci 0000:00:1e.0: setting latency timer to 64
[ 0.266194] pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.266200] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.266204] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.266209] pci_bus 0000:02: resource 0 [io 0x3000-0x7fff]
[ 0.266213] pci_bus 0000:02: resource 1 [mem 0xd0200000-0xdfffffff]
[ 0.266217] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf7ffffff pref]
[ 0.266221] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.266225] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[ 0.266229] pci_bus 0000:03: resource 0 [io 0x3400-0x34ff]
[ 0.266233] pci_bus 0000:03: resource 1 [io 0x3000-0x30ff]
[ 0.266237] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf3ffffff pref]
[ 0.266241] pci_bus 0000:03: resource 3 [mem 0xd4000000-0xd7ffffff]
[ 0.266285] NET: Registered protocol family 2
[ 0.266352] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.266583] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.266709] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.266776] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.266780] TCP reno registered
[ 0.266784] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.266791] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.266861] NET: Registered protocol family 1
[ 0.266881] pci 0000:00:02.0: Boot video device
[ 0.266892] pci 0000:00:1d.0: power state changed by ACPI to D0
[ 0.266897] pci 0000:00:1d.0: power state changed by ACPI to D0
[ 0.266904] pci 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.266921] pci 0000:00:1d.0: PCI INT A disabled
[ 0.266928] pci 0000:00:1d.1: power state changed by ACPI to D0
[ 0.266933] pci 0000:00:1d.1: power state changed by ACPI to D0
[ 0.266944] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.266960] pci 0000:00:1d.1: PCI INT B disabled
[ 0.266971] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.266986] pci 0000:00:1d.2: PCI INT C disabled
[ 0.266994] pci 0000:00:1d.7: power state changed by ACPI to D0
[ 0.267000] pci 0000:00:1d.7: power state changed by ACPI to D0
[ 0.267010] pci 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.267033] pci 0000:00:1d.7: PCI INT D disabled
[ 0.267061] PCI: CLS 32 bytes, default 64
[ 0.267129] Unpacking initramfs...
[ 0.714827] Freeing initrd memory: 9240k freed
[ 0.724155] Simple Boot Flag at 0x35 set to 0x1
[ 0.725088] audit: initializing netlink socket (disabled)
[ 0.725110] type=2000 audit(1332658812.720:1): initialized
[ 0.747813] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.747952] VFS: Disk quotas dquot_6.5.2
[ 0.747982] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.748107] msgmni has been set to 986
[ 0.748313] alg: No test for stdrng (krng)
[ 0.748348] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.748353] io scheduler noop registered
[ 0.748356] io scheduler deadline registered
[ 0.748366] io scheduler cfq registered (default)
[ 0.748540] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.748575] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.748578] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.748827] acpiphp: Slot [1] registered
[ 0.749039] ERST: Table is not found!
[ 0.749042] GHES: HEST is not enabled!
[ 0.749062] isapnp: Scanning for PnP cards...
[ 1.101834] isapnp: No Plug & Play device found
[ 1.101917] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.102437] serial 0000:00:1f.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.102463] serial 0000:00:1f.6: PCI INT B disabled
[ 1.102597] Linux agpgart interface v0.103
[ 1.102710] agpgart-intel 0000:00:00.0: Intel 855GM Chipset
[ 1.102732] agpgart-intel 0000:00:00.0: detected gtt size: 131072K total, 131072K mappable
[ 1.103113] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.103291] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
[ 1.103524] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.109637] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.109647] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.109823] mousedev: PS/2 mouse device common for all mice
[ 1.109883] rtc_cmos 00:06: RTC can wake from S4
[ 1.110001] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.110021] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 1.110092] EISA: Probing bus 0 at eisa.0
[ 1.110100] Cannot allocate resource for EISA slot 1
[ 1.110105] Cannot allocate resource for EISA slot 2
[ 1.110108] Cannot allocate resource for EISA slot 3
[ 1.110112] Cannot allocate resource for EISA slot 4
[ 1.110115] Cannot allocate resource for EISA slot 5
[ 1.110118] Cannot allocate resource for EISA slot 6
[ 1.110121] Cannot allocate resource for EISA slot 7
[ 1.110127] EISA: Detected 0 cards.
[ 1.110131] cpuidle: using governor ladder
[ 1.110134] cpuidle: using governor menu
[ 1.110424] TCP cubic registered
[ 1.110454] NET: Registered protocol family 10
[ 1.111091] Mobile IPv6
[ 1.111094] NET: Registered protocol family 17
[ 1.111106] Registering the dns_resolver key type
[ 1.111123] Using IPI Shortcut mode
[ 1.111247] PM: Hibernation image not present or could not be loaded.
[ 1.111262] registered taskstats version 1
[ 1.111580] rtc_cmos 00:06: setting system clock to 2012-03-25 07:00:13 UTC (1332658813)
[ 1.111645] Initializing network drop monitor service
[ 1.111772] Freeing unused kernel memory: 448k freed
[ 1.112049] Write protecting the kernel text: 2592k
[ 1.112076] Write protecting the kernel read-only data: 1060k
[ 1.113491] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.132157] udevd[42]: starting version 175
[ 1.219819] usbcore: registered new interface driver usbfs
[ 1.219862] usbcore: registered new interface driver hub
[ 1.242560] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 1.242566] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 1.242633] e1000 0000:02:01.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.259484] SCSI subsystem initialized
[ 1.260098] usbcore: registered new device driver usb
[ 1.260847] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.260894] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 1.260900] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 1.260913] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 1.260935] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.260940] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.260968] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.261001] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.264889] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.283733] sdhci: Secure Digital Host Controller Interface driver
[ 1.283738] sdhci: Copyright(c) Pierre Ossman
[ 1.530412] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.530416] ACPI: Thermal Zone [THM0] (34 C)
[ 1.538923] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0100000
[ 1.549116] libata version 3.00 loaded.
[ 1.556515] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.556574] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.556579] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.556583] usb usb1: Product: EHCI Host Controller
[ 1.556587] usb usb1: Manufacturer: Linux 3.2.0-2-486 ehci_hcd
[ 1.556590] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.557338] hub 1-0:1.0: USB hub found
[ 1.557346] hub 1-0:1.0: 6 ports detected
[ 1.557457] ata_piix 0000:00:1f.1: version 2.13
[ 1.557472] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 1.557483] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.557528] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.559183] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.562116] scsi0 : ata_piix
[ 1.566235] scsi1 : ata_piix
[ 1.566921] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 1.566927] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 1.567002] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 1.567007] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 1.567016] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.567028] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.567033] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.567052] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.567086] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820
[ 1.567137] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.567142] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.567146] usb usb2: Product: UHCI Host Controller
[ 1.567149] usb usb2: Manufacturer: Linux 3.2.0-2-486 uhci_hcd
[ 1.567153] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.567316] hub 2-0:1.0: USB hub found
[ 1.567324] hub 2-0:1.0: 2 ports detected
[ 1.567415] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[ 1.567420] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[ 1.567427] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.567437] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.567442] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.567452] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.567479] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 1.567520] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.567524] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.567528] usb usb3: Product: UHCI Host Controller
[ 1.567532] usb usb3: Manufacturer: Linux 3.2.0-2-486 uhci_hcd
[ 1.567535] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.567689] hub 3-0:1.0: USB hub found
[ 1.567695] hub 3-0:1.0: 2 ports detected
[ 1.567791] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.567800] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.567805] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.567815] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.567841] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 1.567883] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.567888] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.567892] usb usb4: Product: UHCI Host Controller
[ 1.567895] usb usb4: Manufacturer: Linux 3.2.0-2-486 uhci_hcd
[ 1.567898] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.568072] hub 4-0:1.0: USB hub found
[ 1.568078] hub 4-0:1.0: 2 ports detected
[ 1.732370] ata1.00: ATA-5: HITACHI_DK13FA-40B, 00MCA0B4, max UDMA/100
[ 1.732375] ata1.00: 78140160 sectors, multi 16: LBA
[ 1.740242] ata1.00: configured for UDMA/100
[ 1.740396] scsi 0:0:0:0: Direct-Access ATA HITACHI_DK13FA-4 00MC PQ: 0 ANSI: 5
[ 1.744514] Refined TSC clocksource calibration: 1395.471 MHz.
[ 1.744524] Switching to clocksource tsc
[ 1.750283] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 1.750353] sd 0:0:0:0: [sda] Write Protect is off
[ 1.750357] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.750387] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.758596] e1000 0000:02:01.0: eth0: (PCI:33MHz:32-bit) 00:0a:e4:2a:6b:b1
[ 1.758604] e1000 0000:02:01.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.758630] sdhci-pci 0000:02:00.1: SDHCI controller found [1180:0822] (rev 13)
[ 1.758648] sdhci-pci 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.759672] sdhci-pci 0000:02:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.759698] mmc0: no vmmc regulator found
[ 1.760773] Registered led device: mmc0::
[ 1.763050] mmc0: SDHCI controller on PCI [0000:02:00.1] using DMA
[ 1.907184] sda: sda1 sda2
[ 1.907652] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.155882] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[ 2.449600] usb 4-1: New USB device found, idVendor=1668, idProduct=2441
[ 2.449605] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[ 2.449610] usb 4-1: SerialNumber: 〳㈴〱〳㈱㜴
[ 2.664409] JFS: nTxBlock = 3949, nTxLock = 31597
[ 7.208524] udevd[238]: starting version 175
[ 9.525726] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input1
[ 9.525738] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 9.528208] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 9.542803] ACPI: Lid Switch [LID]
[ 9.542902] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 9.542911] ACPI: Sleep Button [SLPB]
[ 9.543265] Marking TSC unstable due to TSC halts in idle
[ 9.543279] ACPI: acpi_idle registered with cpuidle
[ 9.544311] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 9.544318] ACPI: Power Button [PWRF]
[ 9.546421] Switching to clocksource acpi_pm
[ 9.547052] ACPI: Battery Slot [BAT0] (battery present)
[ 9.549019] ACPI: AC Adapter [AC] (on-line)
[ 10.158108] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.173564] Non-volatile memory driver v1.3
[ 10.649497] intel_rng: FWH not detected
[ 10.957397] iTCO_vendor_support: vendor-support=0
[ 10.972587] lib80211: common routines for IEEE802.11 drivers
[ 10.972591] lib80211_crypt: registered algorithm 'NULL'
[ 11.227462] psmouse serio1: hgpk: ID: 10 00 64
[ 11.432689] cfg80211: Calling CRDA to update world regulatory domain
[ 11.457901] [drm] Initialized drm 1.1.0 20060810
[ 11.484064] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 11.498307] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input5
[ 11.825649] i915 0000:00:02.0: power state changed by ACPI to D0
[ 11.825657] i915 0000:00:02.0: power state changed by ACPI to D0
[ 11.825667] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.825675] i915 0000:00:02.0: setting latency timer to 64
[ 11.828396] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 11.828401] [drm] Driver supports precise vblank timestamp query.
[ 11.828495] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 11.992380] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 11.992384] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 11.992387] thinkpad_acpi: ThinkPad BIOS 1UETD3WW (2.08 ), EC 1UHTB2WW-1.62
[ 11.992391] thinkpad_acpi: IBM ThinkPad X40, model 2386H6G
[ 11.992849] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 12.000099] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 12.001311] Registered led device: tpacpi::thinklight
[ 12.001368] Registered led device: tpacpi::power
[ 12.001402] Registered led device: tpacpi::standby
[ 12.007035] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 12.009447] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[ 12.036713] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 12.036823] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
[ 12.037631] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.138885] [drm] initialized overlay support
[ 12.212879] libipw: 802.11 data/management/control stack, git-1.1.13
[ 12.212883] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 12.331883] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 12.331888] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 12.332032] ipw2200 0000:02:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 12.332054] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 12.350830] fbcon: inteldrmfb (fb0) is primary device
[ 12.353655] [drm] Changing LVDS panel from (+hsync, +vsync) to (-hsync, -vsync)
[ 12.749506] Console: switching to colour frame buffer device 128x48
[ 12.756227] fb0: inteldrmfb frame buffer device
[ 12.756230] drm: registered panic notifier
[ 12.757535] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 12.757586] snd_intel8x0 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 12.757623] snd_intel8x0 0000:00:1f.5: setting latency timer to 64
[ 13.332997] cfg80211: failed to add phy80211 symlink to netdev!
[ 13.333188] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
[ 13.680031] intel8x0_measure_ac97_clock: measured 55428 usecs (2670 samples)
[ 13.680035] intel8x0: clocking to 48000
[ 13.681686] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 14.324653] cfg80211: World regulatory domain updated:
[ 14.324659] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 14.324664] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.324669] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.324673] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.324677] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.324682] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.895450] Adding 984308k swap on /dev/sda2. Priority:-1 extents:1 across:984308k
[ 34.769821] fsck.jfs: sending ioctl 1261 to a partition!
[ 34.769826] fsck.jfs: sending ioctl 1261 to a partition!
[ 34.811171] fsck.jfs: sending ioctl 1261 to a partition!
[ 34.811175] fsck.jfs: sending ioctl 1261 to a partition!
[ 34.886944] fsck.jfs: sending ioctl 1261 to a partition!
[ 34.886948] fsck.jfs: sending ioctl 1261 to a partition!
[ 36.465693] thinkpad_ec: thinkpad_ec 0.41 loaded.
[ 36.466747] tp_smapi 0.41 loading...
[ 36.467530] tp_smapi successfully loaded (smapi_port=0xb2).
[ 36.589024] P-state transition latency capped at 20 uS
[ 41.457876] fuse init (API version 7.17)
[ 63.116058] smapi smapi: set_real_thresh: set start to 39 for bat=0
[ 63.341471] smapi smapi: set_real_thresh: set stop to 70 for bat=0
[ 63.564063] smapi smapi: set_real_thresh: set start to 39 for bat=1
[ 63.788042] smapi smapi: set_real_thresh: set stop to 70 for bat=1
[ 227.427799] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 227.429897] e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
[ 227.430035] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 229.014305] e1000: eth0 changing MTU from 1500 to 1492
[ 238.000027] eth0: no IPv6 routers present
[ 336.372151] ------------[ cut here ]------------
[ 336.372191] WARNING: at /build/buildd-linux-2.6_3.2.12-1-i386-naqH8d/linux-2.6-3.2.12/debian/build/source_i386_none/drivers/net/ethernet/intel/e1000/e1000_main.c:1447 e1000_close+0x23/0x7f [e1000]()
[ 336.372201] Hardware name: 2386H6G
[ 336.372205] Modules linked in: fuse acpi_cpufreq mperf tp_smapi(O) thinkpad_ec(O) ipw2200 libipw i2c_i801 iTCO_wdt thinkpad_acpi snd_intel8x0 i915 snd_ac97_codec drm_kms_helper drm cfg80211 i2c_algo_bit psmouse lib80211 rfkill iTCO_vendor_support i2c_core rng_core ac97_bus serio_raw snd_pcm_oss snd_mixer_oss nvram shpchp evdev snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq ac processor button battery video snd_timer snd_seq_device snd soundcore snd_page_alloc jfs sd_mod crc_t10dif ata_generic uhci_hcd ata_piix libata sdhci_pci sdhci thermal thermal_sys ehci_hcd scsi_mod mmc_core e1000 usbcore usb_common [last unloaded: scsi_wait_scan]
[ 336.372309] Pid: 2133, comm: ip Tainted: G O 3.2.0-2-486 #1
[ 336.372314] Call Trace:
[ 336.372330] [<c1022d4c>] ? warn_slowpath_common+0x68/0x79
[ 336.372347] [<e010f1f6>] ? e1000_close+0x23/0x7f [e1000]
[ 336.372356] [<c1022d6a>] ? warn_slowpath_null+0xd/0x10
[ 336.372372] [<e010f1f6>] ? e1000_close+0x23/0x7f [e1000]
[ 336.372383] [<c11ed839>] ? __dev_close_many+0x6b/0x89
[ 336.372392] [<c11ed875>] ? __dev_close+0x1e/0x2e
[ 336.372400] [<c11f0cb6>] ? __dev_change_flags+0x8d/0x100
[ 336.372408] [<c11f0d88>] ? dev_change_flags+0x10/0x3b
[ 336.372418] [<c11f8f0f>] ? do_setlink+0x25f/0x668
[ 336.372429] [<c11f9bd0>] ? rtnl_newlink+0x224/0x43c
[ 336.372438] [<c11f9a4b>] ? rtnl_newlink+0x9f/0x43c
[ 336.372450] [<c1284c1a>] ? spurious_fault+0x95/0x95
[ 336.372459] [<c11f99ac>] ? rtnl_configure_link+0x61/0x61
[ 336.372468] [<c11f97fa>] ? rtnetlink_rcv_msg+0x1f9/0x208
[ 336.372477] [<c11f9601>] ? __rtnl_unlock+0xa/0xa
[ 336.372487] [<c1207f9a>] ? netlink_rcv_skb+0x2f/0x70
[ 336.372496] [<c11f8bb6>] ? rtnetlink_rcv+0x16/0x1c
[ 336.372504] [<c1207bec>] ? netlink_unicast+0xc0/0x115
[ 336.372513] [<c1207e18>] ? netlink_sendmsg+0x1d7/0x203
[ 336.372523] [<c11e21a9>] ? sock_sendmsg+0xa7/0xc1
[ 336.372535] [<c1019147>] ? kmap_atomic_prot+0x29/0xa9
[ 336.372546] [<c107bc2c>] ? get_page_from_freelist+0x2f3/0x359
[ 336.372557] [<c1134e90>] ? _copy_from_user+0x28/0x47
[ 336.372567] [<c1281cbd>] ? _cond_resched+0x5/0x18
[ 336.372575] [<c1134e90>] ? _copy_from_user+0x28/0x47
[ 336.372583] [<c11e9fcf>] ? verify_iovec+0x3d/0x76
[ 336.372591] [<c11e258e>] ? __sys_sendmsg+0x16d/0x201
[ 336.372599] [<c11e1fef>] ? sock_sendmsg_nosec+0xc2/0xc2
[ 336.372609] [<c1081987>] ? page_evictable+0xb/0x6d
[ 336.372618] [<c107e5bd>] ? __lru_cache_add+0x19/0x45
[ 336.372627] [<c108b3ac>] ? do_wp_page.isra.60+0x447/0x492
[ 336.372636] [<c108c883>] ? handle_pte_fault+0x5c4/0x63a
[ 336.372646] [<c10389db>] ? hrtimer_forward+0x118/0x130
[ 336.372654] [<c108c9b0>] ? handle_mm_fault+0xb7/0xc9
[ 336.372663] [<c11e3ba5>] ? sys_sendmsg+0x2e/0x49
[ 336.372671] [<c11e406c>] ? sys_socketcall+0x186/0x1da
[ 336.372680] [<c1284c1a>] ? spurious_fault+0x95/0x95
[ 336.372688] [<c1286763>] ? sysenter_do_call+0x12/0x28
[ 336.372695] ---[ end trace 69dbde1272bcd052 ]---
[ 360.744041] INFO: task kworker/0:2:23 blocked for more than 120 seconds.
[ 360.744052] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 360.744062] kworker/0:2 D 535fb6c4 0 23 2 0x00000000
[ 360.744075] dc5577f0 00000046 62822120 535fb6c4 00000035 dc5577f0 dc55781c 00028c52
[ 360.744095] 62545a60 00000002 62822120 00000002 fffd73ae ffffffff dc55781c c13a11ec
[ 360.744113] 00000000 00000001 c13a11ec dc55743c dc557444 c13a11ac c101b71f 7fffffff
[ 360.744131] Call Trace:
[ 360.744149] [<c101b71f>] ? set_next_entity+0x29/0x51
[ 360.744164] [<c1281f83>] ? schedule_timeout+0x1f/0xa5
[ 360.744175] [<c1281c63>] ? __schedule+0x384/0x3a5
[ 360.744187] [<c1281d3c>] ? wait_for_common+0x6c/0xbe
[ 360.744200] [<c101e062>] ? try_to_wake_up+0x70/0x70
[ 360.744214] [<c10327fb>] ? wait_on_work+0xb6/0xda
[ 360.744226] [<c1031d61>] ? worker_set_flags+0x7a/0x7a
[ 360.744238] [<c1033256>] ? __cancel_work_timer+0x86/0xb5
[ 360.744268] [<e010c554>] ? e1000_down_and_stop+0x15/0x37 [e1000]
[ 360.744290] [<e010ed08>] ? e1000_down+0xc4/0x10a [e1000]
[ 360.744312] [<e0110e75>] ? e1000_reset_task+0x40/0x55 [e1000]
[ 360.744324] [<c1032fdf>] ? process_one_work+0xfb/0x1dc
[ 360.744346] [<e0110e35>] ? e1000_change_mtu+0x123/0x123 [e1000]
[ 360.744359] [<c10338e9>] ? worker_thread+0xa3/0x11a
[ 360.744371] [<c1033846>] ? manage_workers.isra.33+0x18a/0x18a
[ 360.744382] [<c1035d86>] ? kthread+0x62/0x67
[ 360.744393] [<c1035d24>] ? flush_kthread_worker+0x73/0x73
[ 360.744406] [<c1286d46>] ? kernel_thread_helper+0x6/0xd
[ 480.744046] INFO: task kworker/0:2:23 blocked for more than 120 seconds.
[ 480.744056] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 480.744065] kworker/0:2 D 535fb6c4 0 23 2 0x00000000
[ 480.744079] dc5577f0 00000046 62822120 535fb6c4 00000035 dc5577f0 dc55781c 00028c52
[ 480.744099] 62545a60 00000002 62822120 00000002 fffd73ae ffffffff dc55781c c13a11ec
[ 480.744117] 00000000 00000001 c13a11ec dc55743c dc557444 c13a11ac c101b71f 7fffffff
[ 480.744135] Call Trace:
[ 480.744157] [<c101b71f>] ? set_next_entity+0x29/0x51
[ 480.744173] [<c1281f83>] ? schedule_timeout+0x1f/0xa5
[ 480.744185] [<c1281c63>] ? __schedule+0x384/0x3a5
[ 480.744197] [<c1281d3c>] ? wait_for_common+0x6c/0xbe
[ 480.744209] [<c101e062>] ? try_to_wake_up+0x70/0x70
[ 480.744224] [<c10327fb>] ? wait_on_work+0xb6/0xda
[ 480.744235] [<c1031d61>] ? worker_set_flags+0x7a/0x7a
[ 480.744248] [<c1033256>] ? __cancel_work_timer+0x86/0xb5
[ 480.744285] [<e010c554>] ? e1000_down_and_stop+0x15/0x37 [e1000]
[ 480.744307] [<e010ed08>] ? e1000_down+0xc4/0x10a [e1000]
[ 480.744329] [<e0110e75>] ? e1000_reset_task+0x40/0x55 [e1000]
[ 480.744341] [<c1032fdf>] ? process_one_work+0xfb/0x1dc
[ 480.744363] [<e0110e35>] ? e1000_change_mtu+0x123/0x123 [e1000]
[ 480.744376] [<c10338e9>] ? worker_thread+0xa3/0x11a
[ 480.744388] [<c1033846>] ? manage_workers.isra.33+0x18a/0x18a
[ 480.744399] [<c1035d86>] ? kthread+0x62/0x67
[ 480.744410] [<c1035d24>] ? flush_kthread_worker+0x73/0x73
[ 480.744423] [<c1286d46>] ? kernel_thread_helper+0x6/0xd
[ 480.744441] INFO: task ntpd:1358 blocked for more than 120 seconds.
[ 480.744449] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 480.744457] ntpd D bfd60970 0 1358 1 0x00000004
[ 480.744470] dc5a07f0 00000086 3b9aca00 bfd60970 bfd60970 dc5a07f0 00000200 c10075b9
[ 480.744488] ffff037f ffff0320 ffffffff 0805f3c6 051d0073 0810efb8 0000007b 00000000
[ 480.744506] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 c13c635c
[ 480.744523] Call Trace:
[ 480.744535] [<c10075b9>] ? save_i387_fxsave+0x60/0x72
[ 480.744549] [<c1282262>] ? __mutex_lock_common.isra.7+0x76/0xae
[ 480.744562] [<c12821ea>] ? mutex_lock+0x13/0x15
[ 480.744573] [<c11f10b3>] ? dev_ioctl+0x2b/0x58a
[ 480.744585] [<c11e4f7f>] ? sk_prot_alloc+0xf6/0xf6
[ 480.744598] [<c10f3b1a>] ? security_sk_alloc+0xd/0xf
[ 480.744609] [<c11e4f7f>] ? sk_prot_alloc+0xf6/0xf6
[ 480.744621] [<c109d08d>] ? kmem_cache_alloc+0x39/0x89
[ 480.744634] [<c122960f>] ? udp_seq_start+0x29/0x29
[ 480.744644] [<c122ee2e>] ? inet_ioctl+0x94/0x97
[ 480.744654] [<c11e23b1>] ? sock_ioctl+0x1b4/0x1db
[ 480.744664] [<c11e21fd>] ? might_fault+0x5/0x5
[ 480.744676] [<c10ae68b>] ? do_vfs_ioctl+0x462/0x499
[ 480.744686] [<c11e2702>] ? sock_alloc_file+0x95/0xeb
[ 480.744697] [<c11e2771>] ? sock_map_fd+0x19/0x1e
[ 480.744707] [<c11e31b2>] ? sys_socket+0x41/0x55
[ 480.744718] [<c10ae706>] ? sys_ioctl+0x44/0x66
[ 480.744729] [<c1286763>] ? sysenter_do_call+0x12/0x28
-- Package-specific info:
** Kernel log: boot messages should be attached
** Model information
not available
** Network interface configuration:
not available
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (900, 'testing'), (800, 'unstable'), (700, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-1-486
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-2-486 depends on:
ii debconf [debconf-2.0] 1.5.41
ii initramfs-tools [linux-initramfs-tool] 0.101
ii linux-base 3.5
ii module-init-tools 3.16-1
Versions of packages linux-image-3.2.0-2-486 recommends:
ii firmware-linux-free 3
Versions of packages linux-image-3.2.0-2-486 suggests:
pn grub-pc 1.99-17
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-2-486 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 0.35
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-2-486/postinst/depmod-error-initrd-3.2.0-2-486: false
linux-image-3.2.0-2-486/postinst/ignoring-ramdisk:
linux-image-3.2.0-2-486/postinst/missing-firmware-3.2.0-2-486:
linux-image-3.2.0-2-486/prerm/removing-running-kernel-3.2.0-2-486: true
--- End Message ---