[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#928397: linux-image-4.19.0-4-amd64: sky2 88E8040 network card does not detect link after hibernate



Package: src:linux
Version: 4.19.28-2
Severity: normal
Tags: upstream

Dear Maintainer,

After hibernation (using the power button on my laptop) my network card
does not detect link. It works fine in 4.9, it does not work in 4.19, it
still does not work in 5.1.0-rc7.

I bisected the kernel and this is the first bad commit:

commit bc976233a872c0f20f018fb1e89264a541584e25
Author: Thomas Gleixner <tglx@linutronix.de>
Date:   Fri Dec 29 10:47:22 2017 +0100

    genirq/msi, x86/vector: Prevent reservation mode for non maskable MSI

    The new reservation mode for interrupts assigns a dummy vector when the
    interrupt is allocated and assigns a real vector when the interrupt is
    requested. The reservation mode prevents vector pressure when
devices with
    a large amount of queues/interrupts are initialized, but only a minimal
    subset of those queues/interrupts is actually used.

    This mode has an issue with MSI interrupts which cannot be masked.
If the
    driver is not careful or the hardware emits an interrupt before the
device
    irq is requestd by the driver then the interrupt ends up on the dummy
    vector as a spurious interrupt which can cause malfunction of the
device or
    in the worst case a lockup of the machine.

    Change the logic for the reservation mode so that the early
activation of
    MSI interrupts checks whether:

     - the device is a PCI/MSI device
     - the reservation mode of the underlying irqdomain is activated
     - PCI/MSI masking is globally enabled
     - the PCI/MSI device uses either MSI-X, which supports masking, or
       MSI with the maskbit supported.

    If one of those conditions is false, then clear the reservation mode
flag
    in the irq data of the interrupt and invoke
irq_domain_activate_irq() with
    the reserve argument cleared. In the x86 vector code, clear the
can_reserve
    flag in the vector allocation data so a subsequent free_irq() won't
create
    the same situation again. The interrupt stays assigned to a real vector
    until pci_disable_msi() is invoked and all allocations are undone.

    Fixes: 4900be83602b ("x86/vector/msi: Switch to global reservation
mode")

Thanks,
Octavio.


-- Package-specific info:
** Version:
Linux version 4.19.0-4-amd64 (debian-kernel@lists.debian.org) (gcc
version 8.3.0 (Debian 8.3.0-2)) #1 SMP Debian 4.19.28-2 (2019-03-15)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.19.0-4-amd64
root=UUID=515d0602-7bc5-471d-92b8-9b5e655129c2 ro
memmap=0x10000$0x00135560000 memmap=0x10000$0x00175560000

** Not tainted

** Kernel log:
[  147.669537] smpboot: CPU 2 is now offline
[  147.693188] smpboot: CPU 3 is now offline
[  147.696387] PM: Creating hibernation image:
[  147.841906] PM: Need to copy 299141 pages
[  147.841911] PM: Normal pages needed: 299141 + 1024, available pages:
1745735
[  147.697007] PM: Restoring platform NVS memory
[  147.697197] ACPI: EC: EC started
[  147.697571] Enabling non-boot CPUs ...
[  147.697624] x86: Booting SMP configuration:
[  147.697625] smpboot: Booting Node 0 Processor 1 APIC 0x4
[  147.700198]  cache: parent cpu1 should not be sleeping
[  147.700563] CPU1 is up
[  147.700595] smpboot: Booting Node 0 Processor 2 APIC 0x1
[  147.703027]  cache: parent cpu2 should not be sleeping
[  147.703502] CPU2 is up
[  147.703535] smpboot: Booting Node 0 Processor 3 APIC 0x5
[  147.706000]  cache: parent cpu3 should not be sleeping
[  147.706422] CPU3 is up
[  147.708876] ACPI: Waking up from system sleep state S4
[  147.717775] ACPI: EC: interrupt unblocked
[  147.882229] usb usb1: root hub lost power or was reset
[  147.886234] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[  147.886261] usb usb2: root hub lost power or was reset
[  147.890243] ACPI: EC: event unblocked
[  147.890251] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[  147.891323] ath: phy0: ASPM enabled: 0x42
[  147.892583] sd 0:0:0:0: [sda] Starting disk
[  148.228697] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  148.228738] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  148.228774] ata5: SATA link down (SStatus 0 SControl 300)
[  148.234082] ata2.00: configured for UDMA/100
[  148.236704] ata1.00: configured for UDMA/133
[  148.241292] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[  148.253277] usb 2-1: reset high-speed USB device number 2 using ehci-pci
[  148.697316] usb 1-1.1: reset high-speed USB device number 3 using
ehci-pci
[  148.905347] usb 2-1.2: reset low-speed USB device number 3 using ehci-pci
[  149.281350] usb 2-1.4: reset high-speed USB device number 4 using
ehci-pci
[  149.393227] PM: Basic memory bitmaps freed
[  149.393240] OOM killer enabled.
[  149.393244] Restarting tasks ... done.
[  149.416137] video LNXVIDEO:02: Restoring backlight state
[  149.416576] PM: hibernation exit
[  149.570128] wlan0: authenticate with 00:26:5a:f5:6a:de
[  149.589614] wlan0: send auth to 00:26:5a:f5:6a:de (try 1/3)
[  149.590945] wlan0: aborting authentication with 00:26:5a:f5:6a:de by
local choice (Reason: 3=DEAUTH_LEAVING)
[  149.715702] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  149.719602] sky2 0000:06:00.0 eth0: enabling interface
[  149.720223] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  149.725161] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  149.740401] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  149.763422] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  149.833655] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  150.843131] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  151.403124] do_IRQ: 3.34 No irq handler for vector
[  151.839114] wlan0: authenticate with d0:54:2d:42:99:38
[  151.858977] wlan0: send auth to d0:54:2d:42:99:38 (try 1/3)
[  151.860650] wlan0: authenticated
[  151.861617] wlan0: associate with d0:54:2d:42:99:38 (try 1/3)
[  151.865408] wlan0: RX AssocResp from d0:54:2d:42:99:38 (capab=0x31
status=0 aid=1)
[  151.865551] wlan0: associated
[  151.873547] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  151.875234] ath: EEPROM regdomain: 0x809c
[  151.875237] ath: EEPROM indicates we should expect a country code
[  151.875238] ath: doing EEPROM country->regdmn map search
[  151.875239] ath: country maps to regdmn code: 0x52
[  151.875240] ath: Country alpha2 being used: CN
[  151.875241] ath: Regpair used: 0x52
[  151.875242] ath: regdomain 0x809c dynamically updated by country element
[  192.458595] pci 0000:00:1e.0: PCI bridge to [bus 08]
[  192.458605] pci 0000:00:1e.0:   bridge window [io  0x5000-0x5fff]
[  192.458615] pci 0000:00:1e.0:   bridge window [mem 0xf0100000-0xf02fffff]
[  192.458622] pci 0000:00:1e.0:   bridge window [mem
0xf0300000-0xf04fffff 64bit pref]
[  192.458722] pci_bus 0000:08: Allocating resources
[  192.458743] pci 0000:00:1e.0: PCI bridge to [bus 08]
[  192.458748] pci 0000:00:1e.0:   bridge window [io  0x5000-0x5fff]
[  192.458756] pci 0000:00:1e.0:   bridge window [mem 0xf0100000-0xf02fffff]
[  192.458763] pci 0000:00:1e.0:   bridge window [mem
0xf0300000-0xf04fffff 64bit pref]
[  192.459505] pci 0000:00:1e.0: PCI bridge to [bus 08]
[  192.459513] pci 0000:00:1e.0:   bridge window [io  0x5000-0x5fff]
[  192.459523] pci 0000:00:1e.0:   bridge window [mem 0xf0100000-0xf02fffff]
[  192.459530] pci 0000:00:1e.0:   bridge window [mem
0xf0300000-0xf04fffff 64bit pref]
[  192.459682] pci 0000:00:1e.0: PCI bridge to [bus 08]
[  192.459687] pci 0000:00:1e.0:   bridge window [io  0x5000-0x5fff]
[  192.459696] pci 0000:00:1e.0:   bridge window [mem 0xf0100000-0xf02fffff]
[  192.459702] pci 0000:00:1e.0:   bridge window [mem
0xf0300000-0xf04fffff 64bit pref]
[  192.459831] pci 0000:00:1e.0: PCI bridge to [bus 08]
[  192.459836] pci 0000:00:1e.0:   bridge window [io  0x5000-0x5fff]
[  192.459844] pci 0000:00:1e.0:   bridge window [mem 0xf0100000-0xf02fffff]
[  192.459851] pci 0000:00:1e.0:   bridge window [mem
0xf0300000-0xf04fffff 64bit pref]
[  192.459884] pci 0000:00:1e.0: PCI bridge to [bus 08]
[  192.459890] pci 0000:00:1e.0:   bridge window [io  0x5000-0x5fff]
[  192.459898] pci 0000:00:1e.0:   bridge window [mem 0xf0100000-0xf02fffff]
[  192.459905] pci 0000:00:1e.0:   bridge window [mem
0xf0300000-0xf04fffff 64bit pref]
[  192.460185] pci_bus 0000:02: Allocating resources
[  192.460218] pci_bus 0000:04: Allocating resources
[  192.460246] pci_bus 0000:06: Allocating resources
[  192.460293] pci 0000:00:1e.0: PCI bridge to [bus 08]
[  192.460301] pci 0000:00:1e.0:   bridge window [io  0x5000-0x5fff]
[  192.460313] pci 0000:00:1e.0:   bridge window [mem 0xf0100000-0xf02fffff]
[  192.460322] pci 0000:00:1e.0:   bridge window [mem
0xf0300000-0xf04fffff 64bit pref]

** Model information
sys_vendor: SAMSUNG ELECTRONICS CO., LTD.
product_name: R530/R730/R540
product_version: Not Applicable
chassis_vendor: SAMSUNG ELECTRONICS CO., LTD.
chassis_version: N/A
bios_vendor: Phoenix Technologies Ltd.
bios_version: 08JV.M029.20100621.hkk
board_vendor: SAMSUNG ELECTRONICS CO., LTD.
board_name: R530/R730/R540
board_version: Not Applicable

** Loaded modules:
ctr
ccm
fuse
nf_tables
cpufreq_conservative
cpufreq_powersave
cpufreq_userspace
nf_conntrack_netlink
nf_conntrack
nf_defrag_ipv6
nf_defrag_ipv4
libcrc32c
nfnetlink
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_v4l2
videobuf2_common
videodev
media
snd_hda_codec_hdmi
snd_hda_codec_realtek
snd_hda_codec_generic
snd_hda_intel
arc4
intel_powerclamp
snd_hda_codec
ath9k
kvm_intel
i915
snd_hda_core
ath9k_common
snd_hwdep
ath9k_hw
snd_pcm
kvm
drm_kms_helper
irqbypass
ath
mac80211
snd_timer
cfg80211
drm
joydev
intel_cstate
snd
sg
intel_uncore
soundcore
serio_raw
i2c_algo_bit
button
samsung_laptop
rfkill
evdev
iTCO_wdt
iTCO_vendor_support
intel_ips
pcspkr
battery
ac
video
pcc_cpufreq
acpi_cpufreq
binfmt_misc
coretemp
loop
parport_pc
ppdev
lp
parport
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
fscrypto
ecb
crypto_simd
cryptd
glue_helper
aes_x86_64
uas
usb_storage
sr_mod
cdrom
sd_mod
hid_generic
usbhid
hid
ahci
libahci
libata
psmouse
crc32c_intel
scsi_mod
ehci_pci
ehci_hcd
i2c_i801
lpc_ich
usbcore
sky2
fan
usb_common
thermal

** Network interface configuration:

auto lo
iface lo inet loopback

allow-hotplug eth0

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast
state DOWN group default qlen 1000
    link/ether e8:11:32:8d:86:49 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state
UP group default qlen 1000
    link/ether e0:ca:94:6c:f5:5e brd ff:ff:ff:ff:ff:ff
    inet 192.168.15.64/24 brd 192.168.15.255 scope global dynamic
noprefixroute wlan0
       valid_lft 215797sec preferred_lft 215797sec
    inet6 fe80::75c9:11b4:9023:1b05/64 scope link noprefixroute
       valid_lft forever preferred_lft forever

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes
  packets errs drop fifo colls carrier compressed
 wlan0:  405515     691    0    0    0     0          0         0
103911     609    0    0    0     0       0          0
  eth0:   29282     154    0    0    0     0          0         0
23425     215    0    0    0     0       0          0
    lo:   13878     182    0    0    0     0          0         0
13878     182    0    0    0     0       0          0

*** Protocol statistics:
Ip:
    Forwarding: 2
    1053 total packets received
    4 with invalid addresses
    0 forwarded
    0 incoming packets discarded
    1039 incoming packets delivered
    891 requests sent out
    34 outgoing packets dropped
Icmp:
    80 ICMP messages received
    0 input ICMP message failed
    ICMP input histogram:
        destination unreachable: 80
    80 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
        destination unreachable: 80
IcmpMsg:
        InType3: 80
        OutType3: 80
Tcp:
    22 active connection openings
    0 passive connection openings
    2 failed connection attempts
    5 connection resets received
    12 connections established
    561 segments received
    500 segments sent out
    0 segments retransmitted
    0 bad segments received
    14 resets sent
Udp:
    205 packets received
    80 packets to unknown port received
    0 packet receive errors
    303 packets sent
    0 receive buffer errors
    0 send buffer errors
    IgnoredMulti: 114
UdpLite:
TcpExt:
    1 packetes rejected in established connections because of timestamp
    22 delayed acks sent
    Quick ack mode was activated 1 times
    312 packet headers predicted
    84 acknowledgments not containing data payload received
    59 predicted acknowledgments
    TCPDSACKOldSent: 1
    2 connections reset due to unexpected data
    5 connections reset due to early user close
    TCPRcvCoalesce: 144
    TCPOFOQueue: 8
    TCPAutoCorking: 25
    TCPOrigDataSent: 156
    TCPKeepAlive: 22
    TCPDelivered: 173
IpExt:
    InMcastPkts: 77
    OutMcastPkts: 91
    InBcastPkts: 114
    OutBcastPkts: 14
    InOctets: 442747
    OutOctets: 100462
    InMcastOctets: 14557
    OutMcastOctets: 13365
    InBcastOctets: 18045
    OutBcastOctets: 882
    InNoECTPkts: 1054


** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM
Controller [8086:0044] (rev 02)
	Subsystem: Samsung Electronics Co Ltd R730 Laptop [144d:c06a]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:02.0 VGA compatible controller [0300]: Intel Corporation Core
Processor Integrated Graphics Controller [8086:0046] (rev 02) (prog-if
00 [VGA controller])
	Subsystem: Samsung Electronics Co Ltd R730 Laptop [144d:c06a]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 26
	Region 0: Memory at fc000000 (64-bit, non-prefetchable) [size=4M]
	Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at 1800 [size=8]
	[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: i915
	Kernel modules: i915

00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series
Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05) (prog-if 20
[EHCI])
	Subsystem: Samsung Electronics Co Ltd R730 Laptop [144d:c06a]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at fc906000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci

00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series
Chipset High Definition Audio [8086:3b56] (rev 05)
	Subsystem: Samsung Electronics Co Ltd R730 Laptop [144d:c06a]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 27
	Region 0: Memory at fc700000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series
Chipset PCI Express Root Port 1 [8086:3b42] (rev 05) (prog-if 00 [Normal
decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: fc500000-fc5fffff
	Prefetchable memory behind bridge: 00000000fca00000-00000000fcbfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series
Chipset PCI Express Root Port 3 [8086:3b46] (rev 05) (prog-if 00 [Normal
decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin C routed to IRQ 18
	Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: fc400000-fc4fffff
	Prefetchable memory behind bridge: 00000000fcc00000-00000000fcdfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series
Chipset PCI Express Root Port 4 [8086:3b48] (rev 05) (prog-if 00 [Normal
decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin D routed to IRQ 19
	Bus: primary=00, secondary=06, subordinate=07, sec-latency=0
	I/O behind bridge: 00004000-00004fff
	Memory behind bridge: fc600000-fc6fffff
	Prefetchable memory behind bridge: 00000000fce00000-00000000fcffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series
Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05) (prog-if 20
[EHCI])
	Subsystem: Samsung Electronics Co Ltd R730 Laptop [144d:c06a]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at fc906400 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev a5) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
	I/O behind bridge: 00005000-00005fff
	Memory behind bridge: f0100000-f02fffff
	Prefetchable memory behind bridge: 00000000f0300000-00000000f04fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation HM55 Chipset LPC Interface
Controller [8086:3b09] (rev 05)
	Subsystem: Samsung Electronics Co Ltd R730 Laptop [144d:c06a]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: lpc_ich
	Kernel modules: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series
Chipset 4 port SATA AHCI Controller [8086:3b29] (rev 05) (prog-if 01
[AHCI 1.0])
	Subsystem: Samsung Electronics Co Ltd R730 Laptop [144d:c06a]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 25
	Region 0: I/O ports at 1818 [size=8]
	Region 1: I/O ports at 180c [size=4]
	Region 2: I/O ports at 1810 [size=8]
	Region 3: I/O ports at 1808 [size=4]
	Region 4: I/O ports at 1820 [size=32]
	Region 5: Memory at fc905000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset
SMBus Controller [8086:3b30] (rev 05)
	Subsystem: Samsung Electronics Co Ltd R730 Laptop [144d:c06a]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at fc906800 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at 1840 [size=32]
	Kernel driver in use: i801_smbus
	Kernel modules: i2c_i801

00:1f.6 Signal processing controller [1180]: Intel Corporation 5
Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 05)
	Subsystem: Samsung Electronics Co Ltd R730 Laptop [144d:c06a]
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at fc704000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: intel ips
	Kernel modules: intel_ips

02:00.0 Network controller [0280]: Qualcomm Atheros AR9285 Wireless
Network Adapter (PCI-Express) [168c:002b] (rev 01)
	Subsystem: Askey Computer Corp. AR9285 Wireless Network Adapter
(PCI-Express) [144f:7167]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at fc500000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: ath9k
	Kernel modules: ath9k

06:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd.
88E8040 PCI-E Fast Ethernet Controller [11ab:4354]
	Subsystem: Samsung Electronics Co Ltd R730 Laptop [144d:c06a]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx+
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 24
	Region 0: Memory at fc600000 (64-bit, non-prefetchable) [size=16K]
	Region 2: I/O ports at 4000 [size=256]
	Capabilities: <access denied>
	Kernel driver in use: sky2
	Kernel modules: sky2

3f:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath
Architecture Generic Non-core Registers [8086:2c62] (rev 02)
	Subsystem: Intel Corporation Core Processor QuickPath Architecture
Generic Non-core Registers [8086:8086]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Latency: 0

3f:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath
Architecture System Address Decoder [8086:2d01] (rev 02)
	Subsystem: Intel Corporation Core Processor QuickPath Architecture
System Address Decoder [8086:8086]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Latency: 0

3f:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0
[8086:2d10] (rev 02)
	Subsystem: Intel Corporation Core Processor QPI Link 0 [8086:8086]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Latency: 0

3f:02.1 Host bridge [0600]: Intel Corporation 1st Generation Core i3/5/7
Processor QPI Physical 0 [8086:2d11] (rev 02)
	Subsystem: Intel Corporation 1st Generation Core i3/5/7 Processor QPI
Physical 0 [8086:8086]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Latency: 0

3f:02.2 Host bridge [0600]: Intel Corporation 1st Generation Core i3/5/7
Processor Reserved [8086:2d12] (rev 02)
	Subsystem: Intel Corporation 1st Generation Core i3/5/7 Processor
Reserved [8086:8086]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Latency: 0

3f:02.3 Host bridge [0600]: Intel Corporation 1st Generation Core i3/5/7
Processor Reserved [8086:2d13] (rev 02)
	Subsystem: Intel Corporation 1st Generation Core i3/5/7 Processor
Reserved [8086:8086]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Latency: 0


** USB devices:
Bus 002 Device 004: ID 058f:6335 Alcor Micro Corp. SD/MMC Card Reader
Bus 002 Device 003: ID 045e:00e1 Microsoft Corp. Wireless Laser Mouse
6000 Receiver
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 1210:25f4 DigiTech
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: buster/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1,
'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.19.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8),
LANGUAGE=en_US:en (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-4.19.0-4-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.133
ii  kmod                                    25-2
ii  linux-base                              4.5

Versions of packages linux-image-4.19.0-4-amd64 recommends:
ii  apparmor             2.13.2-7
ii  firmware-linux-free  3.4
ii  irqbalance           1.5.0-3

Versions of packages linux-image-4.19.0-4-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  extlinux                3:6.04~git20171011.af7e95c3+dfsg1-6
ii  grub-pc                 2.02+dfsg1-10
pn  linux-doc-4.19          <none>

Versions of packages linux-image-4.19.0-4-amd64 is related to:
pn  firmware-amd-graphics                      <none>
pn  firmware-atheros                           <none>
pn  firmware-bnx2                              <none>
pn  firmware-bnx2x                             <none>
pn  firmware-brcm80211                         <none>
pn  firmware-cavium                            <none>
pn  firmware-intel-sound                       <none>
pn  firmware-intelwimax                        <none>
pn  firmware-ipw2x00                           <none>
pn  firmware-ivtv                              <none>
pn  firmware-iwlwifi                           <none>
pn  firmware-libertas                          <none>
pn  firmware-linux-nonfree                     <none>
ii  firmware-misc-nonfree                      20190114-1
pn  firmware-myricom                           <none>
pn  firmware-netxen                            <none>
pn  firmware-qlogic                            <none>
ii  firmware-realtek                           20190114-1
pn  firmware-samsung                           <none>
pn  firmware-siano                             <none>
pn  firmware-ti-connectivity                   <none>
ii  xen-hypervisor-4.1-amd64 [xen-hypervisor]  4.1.4-4

-- no debconf information


Reply to: