Bug#911152: linux-image-4.18.0-0.bpo.1-amd64: unable to write /dev/null in nspawn with options PrivateDevices=yes
Package: src:linux
Version: 4.18.6-1~bpo9+1
Severity: important
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this action?
* What outcome did you expect instead?
*** End of the template - remove these template lines ***
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
From: Said Chavkin <schavkin@gmail.com>
To: Debian Bug Tracking System <submit@bugs.debian.org>
Subject: linux-image-4.18.0-0.bpo.1-amd64: unable to write /dev/null in nspawn with options PrivateDevices=yes
X-Debbugs-Cc: schavkin@gmail.com
Package: src:linux
Version: 4.18.6-1~bpo9+1
Severity: important
Dear Maintainer,
I'm usign stretch + kernel from stretch-backports for to running nspawn containers. Containers are using plain debian stretch.
I've upgraded kernel from linux-image-4.17.0-0.bpo.3-amd64 to linux-image-4.18.0-0.bpo.1-amd64
I've seen next error with powerdns-recursor
Oct 15 07:02:14 nsr2 systemd[1]: Stopped PowerDNS Recursor.
Oct 15 07:02:14 nsr2 systemd[1]: pdns-recursor.service: Failed to set invocation ID on control group /system.slice/pdns-recursor.service, ignoring: Operation not permitted
Oct 15 07:02:14 nsr2 systemd[1]: Starting PowerDNS Recursor...
Oct 15 07:02:14 nsr2 pdns_recursor[476]: Oct 15 07:02:14 PowerDNS Recursor 4.0.4 (C) 2001-2016 PowerDNS.COM BV
Oct 15 07:02:14 nsr2 pdns_recursor[476]: Oct 15 07:02:14 Using 64-bits mode. Built using gcc 6.3.0 20170516.
Oct 15 07:02:14 nsr2 pdns_recursor[476]: Oct 15 07:02:14 PowerDNS comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it according to the terms of the GPL version 2.
Oct 15 07:02:14 nsr2 pdns_recursor[476]: Oct 15 07:02:14 Reading random entropy from '/dev/urandom'
Oct 15 07:02:14 nsr2 pdns_recursor[476]: Oct 15 07:02:14 Unable to open source of random '/dev/urandom': Permission denied
Oct 15 07:02:14 nsr2 systemd[1]: pdns-recursor.service: Main process exited, code=exited, status=1/FAILURE
Oct 15 07:02:14 nsr2 systemd[1]: Failed to start PowerDNS Recursor.
Oct 15 07:02:14 nsr2 systemd[1]: pdns-recursor.service: Unit entered failed state.
Oct 15 07:02:14 nsr2 systemd[1]: pdns-recursor.service: Failed with result 'exit-code'.
Oct 15 07:02:14 nsr2 systemd[1]: pdns-recursor.service: Service hold-off time over, scheduling restart.
Oct 15 07:02:14 nsr2 systemd[1]: Stopped PowerDNS Recursor.
Oct 15 07:02:14 nsr2 systemd[1]: pdns-recursor.service: Failed to set invocation ID on control group /system.slice/pdns-recursor.service, ignoring: Operation not permitted
Oct 15 07:02:14 nsr2 systemd[1]: Starting PowerDNS Recursor...
Instead I expected normal service starting like shown bellow
-- Reboot --
Oct 16 13:26:40 nsr2 systemd[1]: pdns-recursor.service: Failed to set invocation ID on control group /system.slice/pdns-recursor.service, ignoring: Operation not permitted
Oct 16 13:26:40 nsr2 systemd[1]: Starting PowerDNS Recursor...
Oct 16 13:26:45 nsr2 pdns_recursor[44]: Oct 16 13:26:45 PowerDNS Recursor 4.0.4 (C) 2001-2016 PowerDNS.COM BV
Oct 16 13:26:45 nsr2 pdns_recursor[44]: Oct 16 13:26:45 Using 64-bits mode. Built using gcc 6.3.0 20170516.
Oct 16 13:26:45 nsr2 pdns_recursor[44]: Oct 16 13:26:45 PowerDNS comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it according to the terms of the GPL version 2.
Oct 16 13:26:45 nsr2 pdns_recursor[44]: Oct 16 13:26:45 Reading random entropy from '/dev/urandom'
Oct 16 13:26:45 nsr2 pdns_recursor[44]: Oct 16 13:26:45 NOT using IPv6 for outgoing queries - set 'query-local-address6=::' to enable
Oct 16 13:26:45 nsr2 pdns_recursor[44]: Oct 16 13:26:45 Only allowing queries from: 172.16.0.0/23
Oct 16 13:26:45 nsr2 pdns_recursor[44]: Oct 16 13:26:45 Will not send queries to: 127.0.0.0/8, 10.0.0.0/8, 100.64.0.0/10, 169.254.0.0/16, 192.168.0.0/16, 0.0.0.0/8, 192.0.0.0/24, 192.0.2.0/24, 198.51.100.0/24, 20
Oct 16 13:26:45 nsr2 pdns_recursor[44]: Oct 16 13:26:45 PowerDNS Recursor itself will distribute queries over threads
Oct 16 13:26:45 nsr2 pdns_recursor[44]: Oct 16 13:26:45 Reading zone forwarding information from '/etc/powerdns/lan-zones'
Oct 16 13:26:46 nsr2 pdns_recursor[44]: Oct 16 13:26:46 Done parsing 3 forwarding instructions from file '/etc/powerdns/lan-zones'
Oct 16 13:26:46 nsr2 pdns_recursor[44]: Oct 16 13:26:46 Inserting rfc 1918 private space zones
Oct 16 13:26:46 nsr2 pdns_recursor[44]: Oct 16 13:26:46 Listening for UDP queries on 172.16.0.4:53
Oct 16 13:26:46 nsr2 pdns_recursor[44]: Oct 16 13:26:46 Enabled TCP data-ready filter for (slight) DoS protection
Oct 16 13:26:46 nsr2 pdns_recursor[44]: Oct 16 13:26:46 Listening for TCP queries on 172.16.0.4:53
Oct 16 13:26:46 nsr2 pdns_recursor[44]: Oct 16 13:26:46 Insufficient number of filedescriptors available for max-mthreads*threads setting! (4096 < 4121), reducing max-mthreads to 2035
Oct 16 13:26:47 nsr2 pdns_recursor[44]: Oct 16 13:26:47 Set effective group id to 110
Oct 16 13:26:47 nsr2 pdns_recursor[44]: Oct 16 13:26:47 Set effective user id to 106
Oct 16 13:26:47 nsr2 pdns_recursor[44]: Oct 16 13:26:47 Launching 3 threads
Oct 16 13:26:47 nsr2 systemd[1]: Started PowerDNS Recursor.
Oct 16 13:26:47 nsr2 pdns_recursor[44]: Oct 16 13:26:47 Done priming cache with root hints
Oct 16 13:26:47 nsr2 pdns_recursor[44]: Oct 16 13:26:47 Done priming cache with root hints
Oct 16 13:26:47 nsr2 pdns_recursor[44]: Oct 16 13:26:47 Enabled 'epoll' multiplexer
Oct 16 13:30:08 nsr2 systemd[1]: Stopping PowerDNS Recursor...
Oct 16 13:30:08 nsr2 systemd[1]: Stopped PowerDNS Recursor.
-- Reboot --
I've investigate, that error appears caused by options PrivateDevices=true
I've create new container with debootstrap and test it with previous versions of the kernel
All kernels except linux-image-4.17.0-0.bpo.3-amd64 works fine.
said@kvm00:~$ uname -a
Linux kvm00 4.18.0-0.bpo.1-amd64 #1 SMP Debian 4.18.6-1~bpo9+1 (2018-09-13) x86_64 GNU/Linux
said@kvm00:~$ sudo machinectl start cnt.test.lan
said@kvm00:~$ sudo machinectl shell cnt.test.lan /bin/bash -l
Connected to machine cnt.test.lan. Press ^] three times within 1s to exit session.
root@cnt:~# echo >/dev/null
root@cnt:~# systemd-run -p PrivateDevices=yes -t /bin/bash
Running as unit: run-r7e508ba84eb547188a67e99308f2127b.service
Press ^] three times within 1s to disconnect TTY.
root@cnt:/# echo >/dev/null
bash: /dev/null: Permission denied
root@cnt:/# exit
root@cnt:~# logout
Connection to machine cnt.test.lan terminated.
said@kvm00:~$ sudo machinectl poweroff cnt.test.lan
said@kvm00:~$
said@kvm00:~$ uname -a
Linux kvm00 4.17.0-0.bpo.3-amd64 #1 SMP Debian 4.17.17-1~bpo9+1 (2018-08-27) x86_64 GNU/Linux
said@kvm00:~$ sudo machinectl start cnt.test.lan
said@kvm00:~$ sudo machinectl shell cnt.test.lan /bin/bash -l
Connected to machine cnt.test.lan. Press ^] three times within 1s to exit session.
root@cnt:~# echo >/dev/null
root@cnt:~# systemd-run -p PrivateDevices=yes -t /bin/bash
Running as unit: run-re418f45a89e5418aa79c54d42a4f5c83.service
Press ^] three times within 1s to disconnect TTY.
root@cnt:/# echo >/dev/null
root@cnt:/# exit
root@cnt:~# logout
Connection to machine cnt.test.lan terminated.
said@kvm00:~$ sudo machinectl poweroff cnt.test.lan
said@kvm00:~$
said@kvm00:~$ uname -a
Linux kvm00 4.17.0-0.bpo.1-amd64 #1 SMP Debian 4.17.8-1~bpo9+1 (2018-07-23) x86_64 GNU/Linux
said@kvm00:~$ sudo machinectl start cnt.test.lan
said@kvm00:~$ sudo machinectl shell cnt.test.lan /bin/bash -l
Connected to machine cnt.test.lan. Press ^] three times within 1s to exit session.
root@cnt:~# echo >/dev/null
root@cnt:~# systemd-run -p PrivateDevices=yes -t /bin/bash
Running as unit: run-rea5da6871c72422bacdd517624ea7b6a.service
Press ^] three times within 1s to disconnect TTY.
root@cnt:/# echo >/dev/null
root@cnt:/# exit
root@cnt:~# logout
Connection to machine cnt.test.lan terminated.
said@kvm00:~$ sudo machinectl poweroff cnt.test.lan
said@kvm00:~$
said@kvm00:~$ uname -a
Linux kvm00 4.9.0-8-amd64 #1 SMP Debian 4.9.110-3+deb9u6 (2018-10-08) x86_64 GNU/Linux
said@kvm00:~$ sudo machinectl start cnt.test.lan
said@kvm00:~$ sudo machinectl shell cnt.test.lan /bin/bash -l
Connected to machine cnt.test.lan. Press ^] three times within 1s to exit session.
root@cnt:~# echo >/dev/null
root@cnt:~# systemd-run -p PrivateDevices=yes -t /bin/bash
Running as unit: run-r5887c7e86e5a4ae9b4663fe5eb82be5f.service
Press ^] three times within 1s to disconnect TTY.
root@cnt:/# echo >/dev/null
root@cnt:/# exit
root@cnt:~# logout
Connection to machine cnt.test.lan terminated.
said@kvm00:~$ sudo machinectl poweroff cnt.test.lan
said@kvm00:~$
-- Package-specific info:
** Version:
Linux version 4.18.0-0.bpo.1-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 SMP Debian 4.18.6-1~bpo9+1 (2018-09-13)
** Command line:
BOOT_IMAGE=/vmlinuz-4.18.0-0.bpo.1-amd64 root=/dev/mapper/vg00-root ro systemd.unified_cgroup_hierarchy=true swapaccount=1 quiet
** Not tainted
** Kernel log:
[ 4.584718] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 4.739364] EXT4-fs (dm-3): re-mounted. Opts: errors=remount-ro
[ 4.863918] systemd-journald[317]: Received request to flush runtime journal from PID 1
[ 5.739442] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 5.739449] ACPI: Power Button [PWRB]
[ 5.739485] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 5.739492] ACPI: Power Button [PWRF]
[ 6.014989] EFI Variables Facility v0.08 2004-May-17
[ 6.021787] pstore: Registered efi as persistent store backend
[ 6.070581] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.070603] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 6.092162] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 6.116373] parport_pc 00:05: reported by Plug and Play ACPI
[ 6.116425] parport0: PC-style at 0x378, irq 5 [PCSPP]
[ 6.227651] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 6.227653] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 6.227653] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 6.227654] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 6.227654] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 6.267378] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 6.322920] iTCO_vendor_support: vendor-support=0
[ 6.324365] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 6.324407] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[ 6.324497] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.338091] ppdev: user-space parallel port driver
[ 6.385912] 8021q: 802.1Q VLAN Support v1.8
[ 6.395047] asus_wmi: ASUS WMI generic driver loaded
[ 6.407743] asus_wmi: Initialization: 0x0
[ 6.407769] asus_wmi: BIOS WMI version: 0.9
[ 6.407809] asus_wmi: SFUN value: 0x0
[ 6.408097] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input7
[ 6.408179] asus_wmi: Number of fans: 1
[ 6.551649] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
[ 6.551782] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 6.563684] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-2.fw
[ 6.627074] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 6.627076] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.627077] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 6.627078] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 6.627079] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0
[ 6.627080] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 6.627081] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 6.627082] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 6.627083] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 6.634089] r8169 0000:03:00.0 enp3s0: link down
[ 6.634090] r8169 0000:03:00.0 enp3s0: link down
[ 6.634147] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 6.634194] IPv6: ADDRCONF(NETDEV_UP): enp3s0.2560: link is not ready
[ 6.634242] IPv6: ADDRCONF(NETDEV_UP): enp3s0.2561: link is not ready
[ 6.634289] IPv6: ADDRCONF(NETDEV_UP): enp3s0.3584: link is not ready
[ 6.634336] IPv6: ADDRCONF(NETDEV_UP): enp3s0.3585: link is not ready
[ 6.634384] IPv6: ADDRCONF(NETDEV_UP): enp3s0.4094: link is not ready
[ 6.649210] [drm] Replacing VGA console driver
[ 6.649954] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 6.649955] [drm] Driver supports precise vblank timestamp query.
[ 6.650123] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.655107] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0
[ 6.656099] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 6.656236] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 6.656342] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 6.670036] [drm] Cannot find any crtc or sizes
[ 6.673556] [drm] Cannot find any crtc or sizes
[ 6.677041] [drm] Cannot find any crtc or sizes
[ 6.704903] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
[ 6.704953] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[ 6.704999] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[ 6.705043] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[ 6.705088] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[ 6.934577] device enp3s0 entered promiscuous mode
[ 6.934733] IPv6: ADDRCONF(NETDEV_UP): mv2560: link is not ready
[ 6.936540] IPv6: ADDRCONF(NETDEV_UP): mv4094: link is not ready
[ 6.938904] IPv6: ADDRCONF(NETDEV_UP): mv3584: link is not ready
[ 6.985057] IPv6: ADDRCONF(NETDEV_UP): mv3585: link is not ready
[ 6.987114] intel_rapl: Found RAPL domain package
[ 6.987115] intel_rapl: Found RAPL domain core
[ 6.987115] intel_rapl: Found RAPL domain uncore
[ 6.987116] intel_rapl: Found RAPL domain dram
[ 7.005882] IPv6: ADDRCONF(NETDEV_UP): mv2561: link is not ready
[ 7.145402] Adding 2097148k swap on /dev/mapper/vg00-swap. Priority:-2 extents:1 across:2097148k FS
[ 7.290621] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.411125] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 7.648750] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 7.648816] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 7.648874] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[ 7.648931] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
[ 7.648983] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
[ 8.189258] r8169 0000:03:00.0 enp3s0: link up
[ 8.189266] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 8.189356] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0.2560: link becomes ready
[ 8.189377] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0.2561: link becomes ready
[ 8.189395] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0.3584: link becomes ready
[ 8.189415] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0.3585: link becomes ready
[ 8.189432] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0.4094: link becomes ready
[ 8.189470] IPv6: ADDRCONF(NETDEV_CHANGE): mv2560: link becomes ready
[ 8.189490] IPv6: ADDRCONF(NETDEV_CHANGE): mv2561: link becomes ready
[ 8.189507] IPv6: ADDRCONF(NETDEV_CHANGE): mv3584: link becomes ready
[ 8.189524] IPv6: ADDRCONF(NETDEV_CHANGE): mv3585: link becomes ready
[ 8.189542] IPv6: ADDRCONF(NETDEV_CHANGE): mv4094: link becomes ready
[ 36.583122] random: crng init done
[ 36.583124] random: 7 urandom warning(s) missed due to ratelimiting
** Model information
sys_vendor: ASUS
product_name: All Series
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 3602
board_vendor: ASUSTeK COMPUTER INC.
board_name: B85M-G
board_version: Rev X.0x
** Loaded modules:
nft_nat
nft_chain_nat_ipv4
nf_conntrack_ipv4
nf_defrag_ipv4
nf_nat_ipv4
nf_nat
nf_conntrack
nf_tables
nfnetlink
nls_ascii
nls_cp437
vfat
fat
intel_rapl
x86_pkg_temp_thermal
intel_powerclamp
macvlan
coretemp
snd_hda_codec_hdmi
kvm_intel
kvm
i915
snd_hda_codec_realtek
snd_hda_codec_generic
snd_hda_intel
snd_hda_codec
snd_hda_core
irqbypass
snd_hwdep
snd_pcm
crct10dif_pclmul
snd_timer
crc32_pclmul
eeepc_wmi
ghash_clmulni_intel
asus_wmi
8021q
snd
sparse_keymap
garp
mrp
stp
rfkill
llc
ppdev
wmi_bmof
iTCO_wdt
iTCO_vendor_support
soundcore
intel_cstate
intel_uncore
intel_rapl_perf
drm_kms_helper
drm
wmi
parport_pc
lpc_ich
joydev
evdev
pcspkr
mei_me
sg
mei
efi_pstore
efivars
video
parport
i2c_algo_bit
pcc_cpufreq
button
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
fscrypto
ecb
btrfs
xor
zstd_decompress
zstd_compress
xxhash
raid6_pq
libcrc32c
crc32c_generic
hid_generic
usbhid
hid
dm_mod
sd_mod
crc32c_intel
r8169
mii
ahci
libahci
aesni_intel
aes_x86_64
xhci_pci
crypto_simd
libata
ehci_pci
cryptd
glue_helper
ehci_hcd
xhci_hcd
scsi_mod
i2c_i801
usbcore
usb_common
fan
thermal
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4th Gen Core Processor DRAM Controller [8086:0c00] (rev 06)
Subsystem: ASUSTeK Computer Inc. 4th Gen Core Processor DRAM Controller [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: hsw_uncore
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller [8086:0c01] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller [0300]: Intel Corporation 4th Generation Core Processor Family Integrated Graphics Controller [8086:041e] (rev 06) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. 4th Generation Core Processor Family Integrated Graphics Controller [1043:8534]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 29
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06)
Subsystem: ASUSTeK Computer Inc. Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 30
Region 0: Memory at f7d14000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] (rev 05) (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. 8 Series/C220 Series Chipset Family USB xHCI [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 26
Region 0: Memory at f7d00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04)
Subsystem: ASUSTeK Computer Inc. 8 Series/C220 Series Chipset Family MEI Controller [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 27
Region 0: Memory at f7d1e000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 [8086:8c2d] (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. 8 Series/C220 Series Chipset Family USB EHCI [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at f7d1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 05)
Subsystem: ASUSTeK Computer Inc. 8 Series/C220 Series Chipset High Definition Audio Controller [1043:8576]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f7d10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8086:8c10] (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: df200000-df3fffff
Prefetchable memory behind bridge: 00000000df400000-00000000df5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 [8086:8c14] (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 [8086:8c26] (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. 8 Series/C220 Series Chipset Family USB EHCI [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7d1b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge [0601]: Intel Corporation B85 Express LPC Controller [8086:8c50] (rev 05)
Subsystem: ASUSTeK Computer Inc. B85 Express LPC Controller [1043:8534]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c02] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [1043:8534]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 24
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7d1a000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] (rev 05)
Subsystem: ASUSTeK Computer Inc. 8 Series/C220 Series Chipset Family SMBus Controller [1043:8534]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7d19000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c)
Subsystem: ASUSTeK Computer Inc. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [1043:8554]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Region 0: I/O ports at e000 [size=256]
Region 2: Memory at f7c00000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at f0000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
** USB devices:
Bus 003 Device 002: ID 8087:8000 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 003: ID 046d:c31c Logitech, Inc. Keyboard K120
Bus 002 Device 002: ID 1a86:8070 QinHeng Electronics
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 9.5
APT prefers stable
APT policy: (990, 'stable'), (500, 'stable-updates'), (500, 'proposed-updates')
Architecture: amd64 (x86_64)
Kernel: Linux 4.18.0-0.bpo.1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.18.0-0.bpo.1-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.130
ii kmod 23-2
ii linux-base 4.5
Versions of packages linux-image-4.18.0-0.bpo.1-amd64 recommends:
ii apparmor 2.11.0-3+deb9u2
ii firmware-linux-free 3.4
ii irqbalance 1.1.0-2.3
Versions of packages linux-image-4.18.0-0.bpo.1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-efi-amd64 2.02~beta3-5
pn linux-doc-4.18 <none>
Versions of packages linux-image-4.18.0-0.bpo.1-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20161130-3
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- debconf-show failed
-- Package-specific info:
** Version:
Linux version 4.18.0-0.bpo.1-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 SMP Debian 4.18.6-1~bpo9+1 (2018-09-13)
** Command line:
BOOT_IMAGE=/vmlinuz-4.18.0-0.bpo.1-amd64 root=/dev/mapper/vg00-root ro systemd.unified_cgroup_hierarchy=true swapaccount=1 quiet
** Not tainted
** Kernel log:
[ 4.910140] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 5.068117] EXT4-fs (dm-3): re-mounted. Opts: errors=remount-ro
[ 5.098916] systemd-journald[315]: Received request to flush runtime journal from PID 1
[ 6.184374] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 6.184384] ACPI: Power Button [PWRB]
[ 6.184435] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 6.184444] ACPI: Power Button [PWRF]
[ 6.322363] EFI Variables Facility v0.08 2004-May-17
[ 6.328164] pstore: Registered efi as persistent store backend
[ 6.354277] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 6.470222] parport_pc 00:05: reported by Plug and Play ACPI
[ 6.470281] parport0: PC-style at 0x378, irq 5 [PCSPP]
[ 6.481559] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 6.481560] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 6.481561] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 6.481561] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 6.481562] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 6.620905] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.620937] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 6.623071] [drm] Replacing VGA console driver
[ 6.623834] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 6.623835] [drm] Driver supports precise vblank timestamp query.
[ 6.624031] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.626755] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0
[ 6.627613] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 6.627791] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 6.642019] [drm] Cannot find any crtc or sizes
[ 6.645504] [drm] Cannot find any crtc or sizes
[ 6.648976] [drm] Cannot find any crtc or sizes
[ 6.667877] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 6.810022] iTCO_vendor_support: vendor-support=0
[ 6.810547] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 6.810578] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[ 6.810666] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.816886] ppdev: user-space parallel port driver
[ 7.057324] asus_wmi: ASUS WMI generic driver loaded
[ 7.086488] asus_wmi: Initialization: 0x0
[ 7.086515] asus_wmi: BIOS WMI version: 0.9
[ 7.086556] asus_wmi: SFUN value: 0x0
[ 7.086819] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input8
[ 7.086897] asus_wmi: Number of fans: 1
[ 7.156665] 8021q: 802.1Q VLAN Support v1.8
[ 7.266007] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
[ 7.266193] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 7.266284] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 7.325224] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
[ 7.325275] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[ 7.325321] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[ 7.325366] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[ 7.325410] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[ 7.334087] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-2.fw
[ 7.372077] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 7.372078] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.372080] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 7.372080] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 7.372081] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0
[ 7.372082] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 7.372083] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 7.372084] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 7.372085] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 7.380730] Adding 2097148k swap on /dev/mapper/vg00-swap. Priority:-2 extents:1 across:2097148k FS
[ 7.383986] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 7.384049] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 7.384096] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[ 7.384138] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
[ 7.384177] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
[ 7.406086] r8169 0000:03:00.0 enp3s0: link down
[ 7.406088] r8169 0000:03:00.0 enp3s0: link down
[ 7.406145] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 7.406195] IPv6: ADDRCONF(NETDEV_UP): enp3s0.2560: link is not ready
[ 7.406242] IPv6: ADDRCONF(NETDEV_UP): enp3s0.2561: link is not ready
[ 7.406289] IPv6: ADDRCONF(NETDEV_UP): enp3s0.3584: link is not ready
[ 7.406336] IPv6: ADDRCONF(NETDEV_UP): enp3s0.3585: link is not ready
[ 7.406383] IPv6: ADDRCONF(NETDEV_UP): enp3s0.4094: link is not ready
[ 7.501405] intel_rapl: Found RAPL domain package
[ 7.501408] intel_rapl: Found RAPL domain core
[ 7.501411] intel_rapl: Found RAPL domain uncore
[ 7.501413] intel_rapl: Found RAPL domain dram
[ 7.623393] device enp3s0 entered promiscuous mode
[ 7.623503] IPv6: ADDRCONF(NETDEV_UP): mv2560: link is not ready
[ 7.624396] IPv6: ADDRCONF(NETDEV_UP): mv3584: link is not ready
[ 7.625254] IPv6: ADDRCONF(NETDEV_UP): mv2561: link is not ready
[ 7.626104] IPv6: ADDRCONF(NETDEV_UP): mv4094: link is not ready
[ 7.626950] IPv6: ADDRCONF(NETDEV_UP): mv3585: link is not ready
[ 7.894240] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 8.023275] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 8.980825] r8169 0000:03:00.0 enp3s0: link up
[ 8.980831] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 8.980906] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0.2560: link becomes ready
[ 8.980923] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0.2561: link becomes ready
[ 8.980935] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0.3584: link becomes ready
[ 8.980947] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0.3585: link becomes ready
[ 8.980961] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0.4094: link becomes ready
[ 8.980991] IPv6: ADDRCONF(NETDEV_CHANGE): mv2560: link becomes ready
[ 8.981004] IPv6: ADDRCONF(NETDEV_CHANGE): mv2561: link becomes ready
[ 8.981015] IPv6: ADDRCONF(NETDEV_CHANGE): mv3584: link becomes ready
[ 8.981027] IPv6: ADDRCONF(NETDEV_CHANGE): mv3585: link becomes ready
[ 8.981039] IPv6: ADDRCONF(NETDEV_CHANGE): mv4094: link becomes ready
[ 38.126428] random: crng init done
[ 38.126430] random: 7 urandom warning(s) missed due to ratelimiting
** Model information
sys_vendor: ASUS
product_name: All Series
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 3602
board_vendor: ASUSTeK COMPUTER INC.
board_name: B85M-G
board_version: Rev X.0x
** Loaded modules:
nft_nat
nft_chain_nat_ipv4
nf_conntrack_ipv4
nf_defrag_ipv4
nf_nat_ipv4
nf_nat
nf_conntrack
nf_tables
nfnetlink
nls_ascii
nls_cp437
vfat
fat
intel_rapl
macvlan
x86_pkg_temp_thermal
intel_powerclamp
snd_hda_codec_realtek
snd_hda_codec_generic
snd_hda_codec_hdmi
coretemp
kvm_intel
snd_hda_intel
snd_hda_codec
snd_hda_core
8021q
kvm
eeepc_wmi
garp
mrp
asus_wmi
snd_hwdep
stp
snd_pcm
llc
sparse_keymap
irqbypass
rfkill
snd_timer
ppdev
iTCO_wdt
iTCO_vendor_support
wmi_bmof
snd
crct10dif_pclmul
crc32_pclmul
soundcore
ghash_clmulni_intel
sg
i915
intel_cstate
intel_uncore
lpc_ich
intel_rapl_perf
wmi
parport_pc
mei_me
mei
parport
pcspkr
joydev
evdev
efi_pstore
efivars
drm_kms_helper
drm
video
pcc_cpufreq
i2c_algo_bit
button
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
fscrypto
ecb
btrfs
xor
zstd_decompress
zstd_compress
xxhash
raid6_pq
libcrc32c
crc32c_generic
hid_generic
usbhid
hid
dm_mod
sd_mod
crc32c_intel
aesni_intel
ahci
libahci
libata
aes_x86_64
crypto_simd
cryptd
glue_helper
xhci_pci
ehci_pci
xhci_hcd
ehci_hcd
scsi_mod
i2c_i801
r8169
mii
usbcore
usb_common
fan
thermal
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4th Gen Core Processor DRAM Controller [8086:0c00] (rev 06)
Subsystem: ASUSTeK Computer Inc. 4th Gen Core Processor DRAM Controller [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: hsw_uncore
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller [8086:0c01] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller [0300]: Intel Corporation 4th Generation Core Processor Family Integrated Graphics Controller [8086:041e] (rev 06) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. 4th Generation Core Processor Family Integrated Graphics Controller [1043:8534]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06)
Subsystem: ASUSTeK Computer Inc. Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 30
Region 0: Memory at f7d14000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] (rev 05) (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. 8 Series/C220 Series Chipset Family USB xHCI [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 26
Region 0: Memory at f7d00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04)
Subsystem: ASUSTeK Computer Inc. 8 Series/C220 Series Chipset Family MEI Controller [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 27
Region 0: Memory at f7d1e000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 [8086:8c2d] (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. 8 Series/C220 Series Chipset Family USB EHCI [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at f7d1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 05)
Subsystem: ASUSTeK Computer Inc. 8 Series/C220 Series Chipset High Definition Audio Controller [1043:8576]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at f7d10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8086:8c10] (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: df200000-df3fffff
Prefetchable memory behind bridge: 00000000df400000-00000000df5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 [8086:8c14] (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 [8086:8c26] (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. 8 Series/C220 Series Chipset Family USB EHCI [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7d1b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge [0601]: Intel Corporation B85 Express LPC Controller [8086:8c50] (rev 05)
Subsystem: ASUSTeK Computer Inc. B85 Express LPC Controller [1043:8534]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c02] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [1043:8534]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 24
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7d1a000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] (rev 05)
Subsystem: ASUSTeK Computer Inc. 8 Series/C220 Series Chipset Family SMBus Controller [1043:8534]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7d19000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c)
Subsystem: ASUSTeK Computer Inc. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [1043:8554]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Region 0: I/O ports at e000 [size=256]
Region 2: Memory at f7c00000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at f0000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
** USB devices:
Bus 003 Device 002: ID 8087:8000 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 003: ID 046d:c31c Logitech, Inc. Keyboard K120
Bus 002 Device 002: ID 1a86:8070 QinHeng Electronics
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 9.5
APT prefers stable
APT policy: (990, 'stable'), (500, 'stable-updates'), (500, 'proposed-updates')
Architecture: amd64 (x86_64)
Kernel: Linux 4.18.0-0.bpo.1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.18.0-0.bpo.1-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.130
ii kmod 23-2
ii linux-base 4.5
Versions of packages linux-image-4.18.0-0.bpo.1-amd64 recommends:
ii apparmor 2.11.0-3+deb9u2
ii firmware-linux-free 3.4
ii irqbalance 1.1.0-2.3
Versions of packages linux-image-4.18.0-0.bpo.1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-efi-amd64 2.02~beta3-5
pn linux-doc-4.18 <none>
Versions of packages linux-image-4.18.0-0.bpo.1-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20161130-3
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- debconf-show failed
Reply to: