Bug#796250: linux-image-4.0.0-2-amd64: sg module broken?
Package: src:linux
Version: 4.0.8-2
Severity: grave
Tags: upstream patch
Justification: renders package unusable
when using ImgBurn under wine, the reccommended path is to make sure sg module
is loaded.
This works under Fedora(consider it UPSTREAM BLEEDING EDGE debian) but not
under stretch.I have tried both SPTI and ASPI settings, and neither seem to
work for ImgBurn to detect my drives under stretch. ASPI mode works just fine
under Fedora.
This is neither a program bug in ImgBurn nor a wine deficiency.It is a
communication problem between userspace application and kernel drivers.The
issue occurs somewhere between the windows layer and the kernel functions for
raw device access.The sg module SHOULD provide these needed "generic scsi"
functions.
And for some odd other reason, my kernel version is being kept back even though
I am not freezing it.I am stuck at 4002, even if newer version is available.
-- Package-specific info:
** Version:
Linux version 4.0.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.9.3 (Debian 4.9.3-2) ) #1 SMP Debian 4.0.8-2 (2015-07-22)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.0.0-2-amd64 root=UUID=e26b0d1e-661c-4ee3-8e0b-e1bf691fe8df ro rootflags=data=writeback selinux=1 security=selinux nomodeset quiet
** Tainted: PO (4097)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.
** Kernel log:
[68655.816954] ata5.00: configured for UDMA/133
[68655.816972] ata5: EH complete
[69963.436581] wlp12s0: AP c0:56:27:60:d6:cf changed bandwidth, new config is 2442 MHz, width 2 (2432/0 MHz)
[71765.398813] wlp12s0: AP c0:56:27:60:d6:cf changed bandwidth, new config is 2442 MHz, width 1 (2442/0 MHz)
[76094.213533] wlp12s0: AP c0:56:27:60:d6:cf changed bandwidth, new config is 2442 MHz, width 2 (2432/0 MHz)
[77355.006162] wlp12s0: AP c0:56:27:60:d6:cf changed bandwidth, new config is 2442 MHz, width 1 (2442/0 MHz)
[82042.895657] wlp12s0: AP c0:56:27:60:d6:cf changed bandwidth, new config is 2442 MHz, width 2 (2432/0 MHz)
[82222.554471] wlp12s0: AP c0:56:27:60:d6:cf changed bandwidth, new config is 2442 MHz, width 1 (2442/0 MHz)
[85109.418307] wlp12s0: AP c0:56:27:60:d6:cf changed bandwidth, new config is 2442 MHz, width 2 (2432/0 MHz)
[85648.136941] wlp12s0: AP c0:56:27:60:d6:cf changed bandwidth, new config is 2442 MHz, width 1 (2442/0 MHz)
[86911.959966] wlp12s0: AP c0:56:27:60:d6:cf changed bandwidth, new config is 2442 MHz, width 2 (2432/0 MHz)
[86996.161111] usb 9-2.3: new high-speed USB device number 8 using ehci-pci
[86996.262754] usb 9-2.3: New USB device found, idVendor=0781, idProduct=5575
[86996.262757] usb 9-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[86996.262759] usb 9-2.3: Product: Cruzer Glide
[86996.262761] usb 9-2.3: Manufacturer: SanDisk
[86996.262762] usb 9-2.3: SerialNumber: 4C530003170509117533
[86996.263042] usb-storage 9-2.3:1.0: USB Mass Storage device detected
[86996.263126] scsi host11: usb-storage 9-2.3:1.0
[86996.546017] [UFW BLOCK] IN=wlp12s0 OUT= MAC= SRC=2602:030a:2ea2:9cbf:5564:796b:daaf:0e71 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=0 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[86996.546046] [UFW BLOCK] IN=wlp12s0 OUT= MAC= SRC=2602:030a:2ea2:9cbf:1e87:2cff:fec8:8e5c DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=0 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[86996.546073] [UFW BLOCK] IN=wlp12s0 OUT= MAC= SRC=fe80:0000:0000:0000:1e87:2cff:fec8:8e5c DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=0 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[86996.556228] [UFW BLOCK] IN=wlp12s0 OUT= MAC= SRC=2602:030a:2ea2:9cbf:5564:796b:daaf:0e71 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=0 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[86996.556247] [UFW BLOCK] IN=wlp12s0 OUT= MAC= SRC=2602:030a:2ea2:9cbf:1e87:2cff:fec8:8e5c DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=0 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[86996.556274] [UFW BLOCK] IN=wlp12s0 OUT= MAC= SRC=fe80:0000:0000:0000:1e87:2cff:fec8:8e5c DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=0 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[86997.263753] scsi 11:0:0:0: Direct-Access SanDisk Cruzer Glide 1.27 PQ: 0 ANSI: 6
[86997.264010] sd 11:0:0:0: Attached scsi generic sg3 type 0
[86997.265109] sd 11:0:0:0: [sdb] 30529536 512-byte logical blocks: (15.6 GB/14.5 GiB)
[86997.266607] sd 11:0:0:0: [sdb] Write Protect is off
[86997.266610] sd 11:0:0:0: [sdb] Mode Sense: 43 00 00 00
[86997.270490] sd 11:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[86997.282893] sdb: sdb1
[86997.287138] sd 11:0:0:0: [sdb] Attached SCSI removable disk
[86997.517740] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[86997.521486] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[87008.201264] usb 9-2.3: USB disconnect, device number 8
[87008.282133] [UFW BLOCK] IN=wlp12s0 OUT= MAC= SRC=2602:030a:2ea2:9cbf:5564:796b:daaf:0e71 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=0 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[87008.282172] [UFW BLOCK] IN=wlp12s0 OUT= MAC= SRC=2602:030a:2ea2:9cbf:1e87:2cff:fec8:8e5c DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=0 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[87008.282192] [UFW BLOCK] IN=wlp12s0 OUT= MAC= SRC=fe80:0000:0000:0000:1e87:2cff:fec8:8e5c DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=0 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[87008.292389] [UFW BLOCK] IN=wlp12s0 OUT= MAC= SRC=2602:030a:2ea2:9cbf:5564:796b:daaf:0e71 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=0 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[88172.272063] wlp12s0: AP c0:56:27:60:d6:cf changed bandwidth, new config is 2442 MHz, width 1 (2442/0 MHz)
[89617.017986] wlp12s0: AP c0:56:27:60:d6:cf changed bandwidth, new config is 2442 MHz, width 2 (2432/0 MHz)
[90155.374528] wlp12s0: AP c0:56:27:60:d6:cf changed bandwidth, new config is 2442 MHz, width 1 (2442/0 MHz)
[91419.600676] wlp12s0: AP c0:56:27:60:d6:cf changed bandwidth, new config is 2442 MHz, width 2 (2432/0 MHz)
[91597.752109] wlp12s0: AP c0:56:27:60:d6:cf changed bandwidth, new config is 2442 MHz, width 1 (2442/0 MHz)
[92501.712293] wlp12s0: AP c0:56:27:60:d6:cf changed bandwidth, new config is 2442 MHz, width 2 (2432/0 MHz)
[92679.304551] wlp12s0: AP c0:56:27:60:d6:cf changed bandwidth, new config is 2442 MHz, width 1 (2442/0 MHz)
[98450.284260] wlp12s0: AP c0:56:27:60:d6:cf changed bandwidth, new config is 2442 MHz, width 2 (2432/0 MHz)
[98629.741108] wlp12s0: AP c0:56:27:60:d6:cf changed bandwidth, new config is 2442 MHz, width 1 (2442/0 MHz)
[99987.298132] [UFW BLOCK] IN=wlp12s0 OUT= MAC=1c:87:2c:c8:8e:5c:c0:56:27:60:d6:cd:08:00 SRC=202.62.77.171 DST=192.168.2.116 LEN=1492 TOS=0x00 PREC=0x00 TTL=106 ID=1744 DF PROTO=TCP SPT=50592 DPT=6881 WINDOW=65153 RES=0x00 ACK URGP=0
[99987.298204] [UFW BLOCK] IN=wlp12s0 OUT= MAC=1c:87:2c:c8:8e:5c:c0:56:27:60:d6:cd:08:00 SRC=202.62.77.171 DST=192.168.2.116 LEN=1492 TOS=0x00 PREC=0x00 TTL=106 ID=1746 DF PROTO=TCP SPT=50592 DPT=6881 WINDOW=65153 RES=0x00 ACK URGP=0
[99987.298326] [UFW BLOCK] IN=wlp12s0 OUT= MAC=1c:87:2c:c8:8e:5c:c0:56:27:60:d6:cd:08:00 SRC=202.62.77.171 DST=192.168.2.116 LEN=1492 TOS=0x00 PREC=0x00 TTL=106 ID=1747 DF PROTO=TCP SPT=50592 DPT=6881 WINDOW=65153 RES=0x00 ACK URGP=0
[99987.298388] [UFW BLOCK] IN=wlp12s0 OUT= MAC=1c:87:2c:c8:8e:5c:c0:56:27:60:d6:cd:08:00 SRC=202.62.77.171 DST=192.168.2.116 LEN=1492 TOS=0x00 PREC=0x00 TTL=106 ID=1748 DF PROTO=TCP SPT=50592 DPT=6881 WINDOW=65153 RES=0x00 ACK URGP=0
[99987.298466] [UFW BLOCK] IN=wlp12s0 OUT= MAC=1c:87:2c:c8:8e:5c:c0:56:27:60:d6:cd:08:00 SRC=202.62.77.171 DST=192.168.2.116 LEN=1492 TOS=0x00 PREC=0x00 TTL=106 ID=1749 DF PROTO=TCP SPT=50592 DPT=6881 WINDOW=65153 RES=0x00 ACK URGP=0
[99987.298557] [UFW BLOCK] IN=wlp12s0 OUT= MAC=1c:87:2c:c8:8e:5c:c0:56:27:60:d6:cd:08:00 SRC=202.62.77.171 DST=192.168.2.116 LEN=1492 TOS=0x00 PREC=0x00 TTL=106 ID=1750 DF PROTO=TCP SPT=50592 DPT=6881 WINDOW=65153 RES=0x00 ACK URGP=0
[99987.298641] [UFW BLOCK] IN=wlp12s0 OUT= MAC=1c:87:2c:c8:8e:5c:c0:56:27:60:d6:cd:08:00 SRC=202.62.77.171 DST=192.168.2.116 LEN=1492 TOS=0x00 PREC=0x00 TTL=106 ID=1751 DF PROTO=TCP SPT=50592 DPT=6881 WINDOW=65153 RES=0x00 ACK URGP=0
[99987.298738] [UFW BLOCK] IN=wlp12s0 OUT= MAC=1c:87:2c:c8:8e:5c:c0:56:27:60:d6:cd:08:00 SRC=202.62.77.171 DST=192.168.2.116 LEN=1492 TOS=0x00 PREC=0x00 TTL=106 ID=1752 DF PROTO=TCP SPT=50592 DPT=6881 WINDOW=65153 RES=0x00 ACK URGP=0
[99987.298746] [UFW BLOCK] IN=wlp12s0 OUT= MAC=1c:87:2c:c8:8e:5c:c0:56:27:60:d6:cd:08:00 SRC=202.62.77.171 DST=192.168.2.116 LEN=465 TOS=0x00 PREC=0x00 TTL=106 ID=1753 DF PROTO=TCP SPT=50592 DPT=6881 WINDOW=65153 RES=0x00 ACK PSH URGP=0
[99987.299567] [UFW BLOCK] IN=wlp12s0 OUT= MAC=1c:87:2c:c8:8e:5c:c0:56:27:60:d6:cd:08:00 SRC=202.62.77.171 DST=192.168.2.116 LEN=1492 TOS=0x00 PREC=0x00 TTL=106 ID=1754 DF PROTO=TCP SPT=50592 DPT=6881 WINDOW=65153 RES=0x00 ACK URGP=0
[100149.638271] [UFW BLOCK] IN=wlp12s0 OUT= MAC=1c:87:2c:c8:8e:5c:c0:56:27:60:d6:cd:08:00 SRC=202.62.77.171 DST=192.168.2.116 LEN=52 TOS=0x00 PREC=0x00 TTL=106 ID=7672 DF PROTO=TCP SPT=50592 DPT=6881 WINDOW=64659 RES=0x00 ACK URGP=0
[100151.614166] [UFW BLOCK] IN=wlp12s0 OUT= MAC=1c:87:2c:c8:8e:5c:c0:56:27:60:d6:cd:08:00 SRC=202.62.77.171 DST=192.168.2.116 LEN=60 TOS=0x00 PREC=0x00 TTL=106 ID=8458 DF PROTO=TCP SPT=50592 DPT=6881 WINDOW=64659 RES=0x00 ACK URGP=0
[100152.847331] [UFW BLOCK] IN=wlp12s0 OUT= MAC=1c:87:2c:c8:8e:5c:c0:56:27:60:d6:cd:08:00 SRC=202.62.77.171 DST=192.168.2.116 LEN=644 TOS=0x00 PREC=0x00 TTL=106 ID=8973 DF PROTO=TCP SPT=50592 DPT=6881 WINDOW=64659 RES=0x00 ACK URGP=0
[100155.117697] [UFW BLOCK] IN=wlp12s0 OUT= MAC=1c:87:2c:c8:8e:5c:c0:56:27:60:d6:cd:08:00 SRC=202.62.77.171 DST=192.168.2.116 LEN=60 TOS=0x00 PREC=0x00 TTL=106 ID=9885 DF PROTO=TCP SPT=50592 DPT=6881 WINDOW=64659 RES=0x00 ACK URGP=0
[100208.754092] [UFW BLOCK] IN=wlp12s0 OUT= MAC=1c:87:2c:c8:8e:5c:c0:56:27:60:d6:cd:08:00 SRC=202.62.77.171 DST=192.168.2.116 LEN=52 TOS=0x00 PREC=0x00 TTL=106 ID=24402 DF PROTO=TCP SPT=50592 DPT=6881 WINDOW=64595 RES=0x00 ACK URGP=0
[100208.758166] [UFW BLOCK] IN=wlp12s0 OUT= MAC=1c:87:2c:c8:8e:5c:c0:56:27:60:d6:cd:08:00 SRC=202.62.77.171 DST=192.168.2.116 LEN=52 TOS=0x00 PREC=0x00 TTL=106 ID=24403 DF PROTO=TCP SPT=50592 DPT=6881 WINDOW=64547 RES=0x00 ACK URGP=0
[100208.834833] [UFW BLOCK] IN=wlp12s0 OUT= MAC=1c:87:2c:c8:8e:5c:c0:56:27:60:d6:cd:08:00 SRC=202.62.77.171 DST=192.168.2.116 LEN=1492 TOS=0x00 PREC=0x00 TTL=106 ID=24409 DF PROTO=TCP SPT=50592 DPT=6881 WINDOW=64547 RES=0x00 ACK URGP=0
[100208.834930] [UFW BLOCK] IN=wlp12s0 OUT= MAC=1c:87:2c:c8:8e:5c:c0:56:27:60:d6:cd:08:00 SRC=202.62.77.171 DST=192.168.2.116 LEN=1492 TOS=0x00 PREC=0x00 TTL=106 ID=24410 DF PROTO=TCP SPT=50592 DPT=6881 WINDOW=64547 RES=0x00 ACK URGP=0
[100253.436538] wlp12s0: AP c0:56:27:60:d6:cf changed bandwidth, new config is 2442 MHz, width 2 (2432/0 MHz)
[100270.837830] [UFW BLOCK] IN=wlp12s0 OUT= MAC=1c:87:2c:c8:8e:5c:c0:56:27:60:d6:cd:08:00 SRC=202.62.77.171 DST=192.168.2.116 LEN=1492 TOS=0x00 PREC=0x00 TTL=106 ID=21058 DF PROTO=TCP SPT=50592 DPT=6881 WINDOW=65324 RES=0x00 ACK URGP=0
[100275.702966] [UFW BLOCK] IN=wlp12s0 OUT= MAC=1c:87:2c:c8:8e:5c:c0:56:27:60:d6:cd:08:00 SRC=202.62.77.171 DST=192.168.2.116 LEN=1180 TOS=0x00 PREC=0x00 TTL=106 ID=23391 DF PROTO=TCP SPT=50592 DPT=6881 WINDOW=65324 RES=0x00 ACK URGP=0
[100279.334468] [UFW BLOCK] IN=wlp12s0 OUT= MAC=1c:87:2c:c8:8e:5c:c0:56:27:60:d6:cd:08:00 SRC=202.62.77.171 DST=192.168.2.116 LEN=40 TOS=0x00 PREC=0x00 TTL=106 ID=25109 DF PROTO=TCP SPT=50592 DPT=6881 WINDOW=65276 RES=0x00 ACK URGP=0
[100332.874201] [UFW BLOCK] IN=wlp12s0 OUT= MAC=1c:87:2c:c8:8e:5c:c0:56:27:60:d6:cd:08:00 SRC=202.62.77.171 DST=192.168.2.116 LEN=1492 TOS=0x00 PREC=0x00 TTL=106 ID=11063 DF PROTO=TCP SPT=50592 DPT=6881 WINDOW=64620 RES=0x00 ACK URGP=0
[100332.882706] [UFW BLOCK] IN=wlp12s0 OUT= MAC=1c:87:2c:c8:8e:5c:c0:56:27:60:d6:cd:08:00 SRC=202.62.77.171 DST=192.168.2.116 LEN=1492 TOS=0x00 PREC=0x00 TTL=106 ID=11064 DF PROTO=TCP SPT=50592 DPT=6881 WINDOW=64620 RES=0x00 ACK PSH URGP=0
[100332.882715] [UFW BLOCK] IN=wlp12s0 OUT= MAC=1c:87:2c:c8:8e:5c:c0:56:27:60:d6:cd:08:00 SRC=202.62.77.171 DST=192.168.2.116 LEN=40 TOS=0x00 PREC=0x00 TTL=106 ID=11066 DF PROTO=TCP SPT=50592 DPT=6881 WINDOW=64444 RES=0x00 ACK URGP=0
[100337.902488] [UFW BLOCK] IN=wlp12s0 OUT= MAC=1c:87:2c:c8:8e:5c:c0:56:27:60:d6:cd:08:00 SRC=202.62.77.171 DST=192.168.2.116 LEN=954 TOS=0x00 PREC=0x00 TTL=106 ID=12871 DF PROTO=TCP SPT=50592 DPT=6881 WINDOW=64444 RES=0x00 ACK URGP=0
[100394.168812] [UFW BLOCK] IN=wlp12s0 OUT= MAC=1c:87:2c:c8:8e:5c:c0:56:27:60:d6:cd:08:00 SRC=202.62.77.171 DST=192.168.2.116 LEN=52 TOS=0x00 PREC=0x00 TTL=106 ID=30656 DF PROTO=TCP SPT=50592 DPT=6881 WINDOW=64364 RES=0x00 ACK URGP=0
[100394.168869] [UFW BLOCK] IN=wlp12s0 OUT= MAC=1c:87:2c:c8:8e:5c:c0:56:27:60:d6:cd:08:00 SRC=202.62.77.171 DST=192.168.2.116 LEN=52 TOS=0x00 PREC=0x00 TTL=106 ID=30658 DF PROTO=TCP SPT=50592 DPT=6881 WINDOW=64300 RES=0x00 ACK URGP=0
[100394.177589] [UFW BLOCK] IN=wlp12s0 OUT= MAC=1c:87:2c:c8:8e:5c:c0:56:27:60:d6:cd:08:00 SRC=202.62.77.171 DST=192.168.2.116 LEN=1492 TOS=0x00 PREC=0x00 TTL=106 ID=30682 DF PROTO=TCP SPT=50592 DPT=6881 WINDOW=64300 RES=0x00 ACK URGP=0
[100399.529311] [UFW BLOCK] IN=wlp12s0 OUT= MAC=1c:87:2c:c8:8e:5c:c0:56:27:60:d6:cd:08:00 SRC=202.62.77.171 DST=192.168.2.116 LEN=959 TOS=0x00 PREC=0x00 TTL=106 ID=32716 DF PROTO=TCP SPT=50592 DPT=6881 WINDOW=64300 RES=0x00 ACK URGP=0
[100973.053781] wlp12s0: AP c0:56:27:60:d6:cf changed bandwidth, new config is 2442 MHz, width 1 (2442/0 MHz)
[101642.244342] ata5.00: exception Emask 0x0 SAct 0x3000000 SErr 0x0 action 0x6
[101642.244345] ata5.00: irq_stat 0x40000008
[101642.244348] ata5.00: failed command: READ FPDMA QUEUED
[101642.244351] ata5.00: cmd 60/08:c0:18:1a:01/00:00:8a:00:00/40 tag 24 ncq 4096 in
res 41/84:08:18:1a:01/00:00:8a:00:00/00 Emask 0x410 (ATA bus error) <F>
[101642.244353] ata5.00: status: { DRDY ERR }
[101642.244355] ata5.00: error: { ICRC ABRT }
[101642.244358] ata5: hard resetting link
[101642.740843] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[101642.882430] ata5.00: configured for UDMA/133
[101642.882440] ata5: EH complete
[119247.275011] e1000e: enp3s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[119247.702796] e1000e: enp3s0 NIC Link is Down
[119250.636441] e1000e: enp3s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[119251.853567] e1000e: enp3s0 NIC Link is Down
[119253.677267] e1000e: enp3s0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[119253.677382] e1000e 0000:03:00.0 enp3s0: 10/100 speed: disabling TSO
[123213.655705] e1000e: enp3s0 NIC Link is Down
[123215.832642] e1000e: enp3s0 NIC Link is Down
[123216.011638] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
** Model information
sys_vendor: To be filled by O.E.M.
product_name: To be filled by O.E.M.
product_version: To be filled by O.E.M.
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: 2201
board_vendor: ASUSTeK COMPUTER INC.
board_name: CROSSHAIR V FORMULA-Z
board_version: Rev 1.xx
** Loaded modules:
nls_utf8
nls_cp437
vfat
fat
uas
usb_storage
ctr
ccm
xt_multiport
snd_hrtimer
snd_seq
cpufreq_stats
cpufreq_powersave
cpufreq_conservative
cpufreq_userspace
binfmt_misc
ip6t_REJECT
nf_reject_ipv6
nf_log_ipv6
xt_hl
ip6t_rt
nf_conntrack_ipv6
nf_defrag_ipv6
eeepc_wmi
asus_wmi
sparse_keymap
mxm_wmi
video
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
v4l2_common
videodev
kvm_amd
ipt_REJECT
nf_reject_ipv4
media
kvm
joydev
evdev
nf_log_ipv4
fglrx(PO)
snd_usb_audio
snd_usbmidi_lib
snd_rawmidi
snd_seq_device
xpad
ff_memless
nf_log_common
psmouse
fam15h_power
xt_LOG
arc4
crct10dif_pclmul
crc32_pclmul
serio_raw
k10temp
pcspkr
rtl8192ce
ghash_clmulni_intel
rtl_pci
rtl8192c_common
rtlwifi
mac80211
aesni_intel
aes_x86_64
lrw
gf128mul
glue_helper
ablk_helper
cfg80211
rfkill
xt_limit
snd_hda_codec_realtek
cryptd
edac_mce_amd
edac_core
xt_tcpudp
snd_hda_codec_generic
snd_hda_codec_hdmi
sp5100_tco
i2c_piix4
button
snd_hda_intel
xt_addrtype
acpi_cpufreq
tpm_infineon
processor
nf_conntrack_ipv4
nf_defrag_ipv4
tcp_illinois
xt_conntrack
snd_hda_controller
snd_hda_codec
snd_hwdep
wmi
shpchp
thermal_sys
fuse
sg
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_timer
snd
soundcore
ip6table_filter
ip6_tables
nf_conntrack_netbios_ns
nf_conntrack_broadcast
nf_nat_ftp
nf_nat
nf_conntrack_ftp
nf_conntrack
iptable_filter
ip_tables
x_tables
tpm_tis
tpm
ecryptfs
parport_pc
ppdev
lp
parport
loop
dm_crypt
dm_mod
autofs4
ext4
crc16
mbcache
jbd2
hid_logitech_hidpp
hid_logitech_dj
usbhid
hid
sd_mod
sr_mod
cdrom
ohci_pci
crc32c_intel
ohci_hcd
ehci_pci
ehci_hcd
xhci_pci
ahci
xhci_hcd
libahci
libata
usbcore
e1000e
usb_common
ptp
scsi_mod
pps_core
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx0 port B) [1002:5a14] (rev 02)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx0 port B) [1002:5a14]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port B) [1002:5a16] (prog-if 00 [Normal decode])
DeviceName: Onboard IGD
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port D) [1002:5a18] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe900000-fe9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:05.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port E) [1002:5a19] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe800000-fe8fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:06.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port F) [1002:5a1a] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Memory behind bridge: fe700000-fe7fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port G) [1002:5a1b] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Memory behind bridge: fe600000-fe6fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:09.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port H) [1002:5a1c] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
Memory behind bridge: fe500000-fe5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0a.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx1 port A) [1002:5a1d] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fe400000-fe4fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0b.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (NB-SB link) [1002:5a1f] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fe300000-fe3fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0d.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx1 port B) [1002:5a1e] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (rev 40) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:84dd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at f040 [size=8]
Region 1: I/O ports at f030 [size=4]
Region 2: I/O ports at f020 [size=8]
Region 3: I/O ports at f010 [size=4]
Region 4: I/O ports at f000 [size=16]
Region 5: Memory at feb0b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at feb0a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at feb09000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at feb08000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 21
Region 0: Memory at feb07000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385] (rev 42)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
Subsystem: ASUSTeK Computer Inc. Device [1043:854b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at feb00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at feb06000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:15.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) [1002:43a0] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:15.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1) [1002:43a1] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: fe200000-fe2fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:16.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at feb05000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:16.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 23
Region 0: Memory at feb04000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 0 [1022:1600]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 1 [1022:1601]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 2 [1022:1602]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 3 [1022:1603]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 4 [1022:1604]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: fam15h_power
00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 5 [1022:1605]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Pitcairn PRO [Radeon HD 7850 / R7 265 / R9 270 1024SP] [1002:6819] (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited / Sapphire Technology Device [174b:a001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 57
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fea00000 (64-bit, non-prefetchable) [size=256K]
Region 4: I/O ports at e000 [size=256]
Expansion ROM at fea40000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci
01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] [1002:aab0]
Subsystem: PC Partner Limited / Sapphire Technology Device [174b:aab0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 53
Region 0: Memory at fea60000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
02:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1062 Serial ATA Controller [1b21:0612] (rev 01) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:84b7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 31
Region 0: I/O ports at d050 [size=8]
Region 1: I/O ports at d040 [size=4]
Region 2: I/O ports at d030 [size=8]
Region 3: I/O ports at d020 [size=4]
Region 4: I/O ports at d000 [size=32]
Region 5: Memory at fe900000 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
Kernel driver in use: ahci
03:00.0 Ethernet controller [0200]: Intel Corporation 82583V Gigabit Network Connection [8086:150c]
Subsystem: ASUSTeK Computer Inc. Device [1043:8457]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at fe800000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at c000 [size=32]
Region 3: Memory at fe820000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: e1000e
04:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042A USB 3.0 Host Controller [1b21:1142] (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:85bf]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
05:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042A USB 3.0 Host Controller [1b21:1142] (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:85bf]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 39
Region 0: Memory at fe600000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
06:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042A USB 3.0 Host Controller [1b21:1142] (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:85bf]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at fe500000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
07:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1062 Serial ATA Controller [1b21:0612] (rev 01) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:84b7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 33
Region 0: I/O ports at b050 [size=8]
Region 1: I/O ports at b040 [size=4]
Region 2: I/O ports at b030 [size=8]
Region 3: I/O ports at b020 [size=4]
Region 4: I/O ports at b000 [size=32]
Region 5: Memory at fe400000 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
Kernel driver in use: ahci
08:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Pitcairn PRO [Radeon HD 7850 / R7 265 / R9 270 1024SP] [1002:6819] (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited / Sapphire Technology Device [174b:a001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 58
Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fe300000 (64-bit, non-prefetchable) [size=256K]
Region 4: I/O ports at a000 [size=256]
Expansion ROM at fe340000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci
08:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] [1002:aab0]
Subsystem: PC Partner Limited / Sapphire Technology Device [174b:aab0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 54
Region 0: Memory at fe360000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
0c:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8192CE PCIe Wireless Network Adapter [10ec:8178] (rev 01)
Subsystem: ASUSTeK Computer Inc. Device [1043:85e3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at 9000 [size=256]
Region 2: Memory at fe200000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: rtl8192ce
** USB devices:
Bus 009 Device 003: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 009 Device 006: ID ffff:ffff
Bus 009 Device 005: ID ffff:ffff
Bus 009 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 009 Device 002: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 009 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 013 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 012 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 002: ID 046d:0829 Logitech, Inc.
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: stretch/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.0.0-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.0.0-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.57
ii initramfs-tools [linux-initramfs-tool] 0.120
ii kmod 21-1
ii linux-base 4.0
Versions of packages linux-image-4.0.0-2-amd64 recommends:
pn firmware-linux-free <none>
pn irqbalance <none>
Versions of packages linux-image-4.0.0-2-amd64 suggests:
ii debian-kernel-handbook 1.0.15
ii grub-pc 2.02~beta2-26
pn linux-doc-4.0 <none>
Versions of packages linux-image-4.0.0-2-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.44
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.44
pn xen-hypervisor <none>
-- debconf information:
linux-image-4.0.0-2-amd64/postinst/mips-initrd-4.0.0-2-amd64:
linux-image-4.0.0-2-amd64/postinst/depmod-error-initrd-4.0.0-2-amd64: false
linux-image-4.0.0-2-amd64/prerm/removing-running-kernel-4.0.0-2-amd64: true
Reply to: