Bug#731016: Can't mount external USB HD Asus AN300

[Ido Halperin <idohlp2@gmail.com>]

I appologize. I accidently posted the traffic of regular flash-memory
disk. This is the traffic for the HDD:

USB data
USB3.0 Device Super Speed Mass Storage - USB Mass Storage Device
ID: 1
Function: IRP_MJ_PNP
Minor function: PNP_IRP_UNKNOWN (0x18)
Status code: 0xC00000BB
Status: ERROR
ID: 2
Function: IRP_MJ_PNP
Minor function: IRP_MN_QUERY_RESOURCE_REQUIREMENTS
Status code: 0xC00000BB
Status: ERROR
ID: 3
Function: IRP_MJ_PNP
Minor function: IRP_MN_FILTER_RESOURCE_REQUIREMENTS
Status code: 0xC00000BB
Status: ERROR
ID: 4
Function: IRP_MJ_PNP
Minor function: IRP_MN_START_DEVICE
Status code: 0x00000000
Status: STATUS_SUCCESS
ID: 5
Function: IRP_MJ_PNP
Minor function: IRP_MN_QUERY_CAPABILITIES
Status code: 0x00000000
Status: STATUS_SUCCESS
ID: 6
Function: IRP_MJ_PNP
Minor function: IRP_MN_QUERY_PNP_DEVICE_STATE
Status code: 0x00000000
Status: STATUS_SUCCESS
ID: 7
Function: IRP_MJ_SYSTEM_CONTROL
Status code: 0x00000000
Status: STATUS_SUCCESS

Ido


On Mon, 2013-12-02 at 18:15 +0100, Josua Dietze wrote:


[...]
> In case there IS a driver required on Windows, you might be able to catch the initial traffic between this driver and the device once the thing is re-plugged. In a second step, the initiating command(s) can possibly be 'replayed' in Linux. This is the usual way usb_modeswitch works.
> Note that if a special Windows driver is required for actually ACCESSING the disk (not just for initialization), then a new Linux driver may be required as well ...
> 
[...]

 I don't know if it will help but I tried to capture the USB traffic on
Windows station at the time I connected the drive. I got some output but
I don't know it's meaning. That what I got by the USB capturing
software:

USB data
SMI Corporation USB DISK - USB Mass Storage Device
[...]