Bug#731271: linux-image-3.11-2-amd64: CHROMEOS_LAPTOP should be enabled.
Package: src:linux
Version: 3.11.8-1
Severity: important
Dear Maintainer,
Although many of the X86-specific hardware options are enabled as
modules, that for ChromeOS devices is not. This is a bit of a
show-stopper for those of us who are using them with Debian. Please
consider setting CHROMEOS_LAPTOP to "M" so that we can effectively use
our machines (you may note that I'm running this on a virtualbox
instance due to this very problem).
Thanks,
-- Package-specific info:
** Version:
Linux version 3.11-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.1 (Debian 4.8.1-10) ) #1 SMP Debian 3.11.8-1 (2013-11-13)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.11-2-amd64 root=UUID=9e8a603f-d3f0-4c19-83cc-f3944dbec3a6 ro quiet
** Not tainted
** Kernel log:
[ 1.817010] ohci-pci: OHCI PCI platform driver
[ 1.837554] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 1.837559] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 1.843720] Error: Driver 'pcspkr' is already registered, aborting...
[ 1.915827] microcode: CPU0 sig=0x20652, pf=0x1, revision=0x0
[ 1.951227] platform microcode: firmware: agent aborted loading intel-ucode/06-25-02 (not found?)
[ 1.951668] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.964458] intel8x0_measure_ac97_clock: measured 52776 usecs (10397 samples)
[ 1.964463] intel8x0: measured clock 197002 rejected
[ 2.056522] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[ 2.132364] Switched to clocksource tsc
[ 2.324348] intel8x0_measure_ac97_clock: measured 55952 usecs (10473 samples)
[ 2.324354] intel8x0: measured clock 187178 rejected
[ 2.684311] intel8x0_measure_ac97_clock: measured 55910 usecs (10182 samples)
[ 2.684316] intel8x0: measured clock 182114 rejected
[ 2.684318] intel8x0: clocking to 48000
[ 2.685328] ata_piix 0000:00:01.1: version 2.13
[ 2.685596] ata_piix 0000:00:01.1: setting latency timer to 64
[ 2.688132] scsi1 : ata_piix
[ 2.688132] scsi2 : ata_piix
[ 2.688132] ata2: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 2.688132] ata3: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 2.689106] piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
[ 2.691254] ehci-pci 0000:00:0b.0: setting latency timer to 64
[ 2.691316] ehci-pci 0000:00:0b.0: EHCI Host Controller
[ 2.691329] ehci-pci 0000:00:0b.0: new USB bus registered, assigned bus number 1
[ 2.691901] ehci-pci 0000:00:0b.0: irq 19, io mem 0xf0805000
[ 2.700122] ehci-pci 0000:00:0b.0: USB 2.0 started, EHCI 1.00
[ 2.700151] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.700153] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.700154] usb usb1: Product: EHCI Host Controller
[ 2.700155] usb usb1: Manufacturer: Linux 3.11-2-amd64 ehci_hcd
[ 2.700156] usb usb1: SerialNumber: 0000:00:0b.0
[ 2.700242] hub 1-0:1.0: USB hub found
[ 2.700252] hub 1-0:1.0: 8 ports detected
[ 2.701706] ohci-pci 0000:00:06.0: setting latency timer to 64
[ 2.701733] ohci-pci 0000:00:06.0: OHCI PCI host controller
[ 2.701745] ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 2
[ 2.701865] ohci-pci 0000:00:06.0: irq 22, io mem 0xf0804000
[ 2.756483] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.756489] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.756493] usb usb2: Product: OHCI PCI host controller
[ 2.756495] usb usb2: Manufacturer: Linux 3.11-2-amd64 ohci_hcd
[ 2.756498] usb usb2: SerialNumber: 0000:00:06.0
[ 2.756835] hub 2-0:1.0: USB hub found
[ 2.756861] hub 2-0:1.0: 8 ports detected
[ 2.758233] e1000 0000:00:03.0: setting latency timer to 64
[ 3.063502] ata3.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
[ 3.063856] ata3.00: configured for UDMA/33
[ 3.064354] scsi 2:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
[ 3.100041] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:58:3b:4e
[ 3.100041] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[ 3.148479] sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
[ 3.148482] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.148736] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 3.190424] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.191034] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 3.368160] usb 2-1: new full-speed USB device number 2 using ohci-pci
[ 3.641208] usb 2-1: New USB device found, idVendor=80ee, idProduct=0021
[ 3.641213] usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 3.641214] usb 2-1: Product: USB Tablet
[ 3.641216] usb 2-1: Manufacturer: VirtualBox
[ 3.665289] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.680055] usbcore: registered new interface driver usbhid
[ 3.680061] usbhid: USB HID core driver
[ 3.708103] input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input5
[ 3.708410] hid-generic 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
[ 3.753671] Adding 392188k swap on /dev/sda5. Priority:-1 extents:1 across:392188k
[ 3.782089] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 3.926944] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 4.711731] RPC: Registered named UNIX socket transport module.
[ 4.711734] RPC: Registered udp transport module.
[ 4.711735] RPC: Registered tcp transport module.
[ 4.711736] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 4.744588] FS-Cache: Loaded
[ 4.768496] FS-Cache: Netfs 'nfs' registered for caching
[ 4.803811] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 5.361707] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.362402] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 5.362674] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 71.156857] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 231.952707] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 332.766006] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 520.603504] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 560.273398] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 701.168783] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 1059.322735] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 1072.577174] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 1080.037671] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 1084.749383] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 1087.916858] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 1143.374044] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 1178.264266] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 1299.371799] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 1487.420988] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 1555.600013] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 1576.238055] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 1579.847095] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 1585.219979] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 1898.551690] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly.
** Model information
sys_vendor: innotek GmbH
product_name: VirtualBox
product_version: 1.2
chassis_vendor: Oracle Corporation
chassis_version:
bios_vendor: innotek GmbH
bios_version: VirtualBox
board_vendor: Oracle Corporation
board_name: VirtualBox
board_version: 1.2
** Loaded modules:
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
joydev
hid_generic
usbhid
hid
sg
sr_mod
cdrom
ata_generic
microcode
psmouse
e1000
ohci_pci
ohci_hcd
ehci_pci
i2c_piix4
evdev
pcspkr
serio_raw
i2c_core
ehci_hcd
usbcore
parport_pc
mperf
parport
processor
button
ac
ata_piix
usb_common
thermal_sys
snd_intel8x0
snd_ac97_codec
snd_pcm
snd_page_alloc
snd_timer
snd
soundcore
ac97_bus
ext4
crc16
mbcache
jbd2
sd_mod
crc_t10dif
ahci
libahci
libata
scsi_mod
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 08:00:27:58:3b:4e brd ff:ff:ff:ff:ff:ff
inet 10.0.2.15/24 brd 10.0.2.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::a00:27ff:fe58:3b4e/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
eth0: 919671766 1057949 0 0 0 0 0 0 25644164 426083 0 0 0 0 0 0
lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
471617 total packets received
0 forwarded
0 incoming packets discarded
471615 incoming packets delivered
426051 requests sent out
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
14 active connections openings
0 passive connection openings
0 failed connection attempts
0 connection resets received
0 connections established
471577 segments received
426023 segments send out
0 segments retransmited
0 bad segments received.
0 resets sent
Udp:
38 packets received
0 packets to unknown port received.
0 packet receive errors
38 packets sent
UdpLite:
TcpExt:
8 TCP sockets finished time wait in fast timer
159 delayed acks sent
25 delayed acks further delayed because of locked socket
Quick ack mode was activated 88 times
456708 packet headers predicted
15 acknowledgments not containing data payload received
215 predicted acknowledgments
TCPRcvCoalesce: 332253
TCPOFOQueue: 2
IpExt:
InNoRoutes: 2
InOctets: 881407128
OutOctets: 17109345
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma] [8086:1237] (rev 02)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] [8086:7000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
Region 4: I/O ports at d000 [size=16]
Kernel driver in use: ata_piix
00:02.0 VGA compatible controller [0300]: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter [80ee:beef] (prog-if 00 [VGA controller])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=16M]
Expansion ROM at <unassigned> [disabled]
00:03.0 Ethernet controller [0200]: Intel Corporation 82540EM Gigabit Ethernet Controller [8086:100e] (rev 02)
Subsystem: Intel Corporation PRO/1000 MT Desktop Adapter [8086:001e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (63750ns min)
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at d010 [size=8]
Capabilities: <access denied>
Kernel driver in use: e1000
00:04.0 System peripheral [0880]: InnoTek Systemberatung GmbH VirtualBox Guest Service [80ee:cafe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at d020 [size=32]
Region 1: Memory at f0400000 (32-bit, non-prefetchable) [size=4M]
Region 2: Memory at f0800000 (32-bit, prefetchable) [size=16K]
00:05.0 Multimedia audio controller [0401]: Intel Corporation 82801AA AC'97 Audio Controller [8086:2415] (rev 01)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at d100 [size=256]
Region 1: I/O ports at d200 [size=64]
Kernel driver in use: snd_intel8x0
00:06.0 USB controller [0c03]: Apple Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10 [OHCI])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f0804000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:07.0 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 08)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 9
00:0b.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (prog-if 20 [EHCI])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f0805000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ehci-pci
00:0d.0 SATA controller [0106]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] [8086:2829] (rev 02) (prog-if 01 [AHCI 1.0])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at d240 [size=8]
Region 1: I/O ports at 0000
Region 2: I/O ports at d250 [size=8]
Region 3: I/O ports at 0000
Region 4: I/O ports at d260 [size=16]
Region 5: Memory at f0806000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 80ee:0021 VirtualBox USB Tablet
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing-updates
APT policy: (500, 'testing-updates'), (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.11-2-amd64 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.11-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.52
ii initramfs-tools [linux-initramfs-tool] 0.115
ii kmod 9-3
ii linux-base 3.5
Versions of packages linux-image-3.11-2-amd64 recommends:
pn firmware-linux-free <none>
Versions of packages linux-image-3.11-2-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u2
pn linux-doc-3.11 <none>
Versions of packages linux-image-3.11-2-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.11-2-amd64/prerm/removing-running-kernel-3.11-2-amd64: true
linux-image-3.11-2-amd64/postinst/depmod-error-initrd-3.11-2-amd64: false
Reply to: