Bug#726943: Hibernation: invisible shell without X, crazy frame buffer with X(fbdev)
Package: src:linux
Version: 3.2.51-1
Severity: normal
Dear Maintainer,
I've some problems about Hibernation (aka Suspend-To-Disk, STD).
I've tried to hibernate my system with 'echo disk > /sys/power/state'; all seems work pretty.
After reboot, I've edited by grub the kernel options by adding 'resume=/dev/sda4' option.
After kernel boot, if I've done Hibernation command without X,
I don't see anything after kernel loading; I can't log in (I don't use DMs), I can only reboot with system button.
Else if I've done Hibernation command with X, frame buffer crazys (I use fbdev, see below if you want to know why).
Anyway, also in this case I have to press system button.
I'm sorry, but I don't know how can I help you because I can't monit my system when it is in sleep mode.
I think there is something doesn't go with GMA 3600 drivers, you should remember that gma500 driver is a kernel
experimental driver.
But, when I used 2.6 kernel, there wasn't DRM support for this GPU, so I used VESA drivers, but there was that bug.
My suspects are shifted on ACPI. I don't know where to search. I'm sorry, I am not yet a developer or a debugger.
-- Package-specific info:
** Version:
Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.46-1+deb7u1
** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-4-686-pae root=UUID=96ea1526-0f5b-4e66-aae3-60f578b6e87c ro quiet acpi_osi=Linux acpi_backlight=vendor
** Not tainted
** Kernel log:
[ 10.070749] gma500 0000:00:02.0: allocated 1024x600 fb
[ 10.071182] fbcon: psbfb (fb0) is primary device
[ 10.136154] usb 1-4: New USB device found, idVendor=04f2, idProduct=b26f
[ 10.136169] usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 10.136181] usb 1-4: Product: USB2.0 0.3M UVC WebCam
[ 10.136191] usb 1-4: Manufacturer: Chicony Electronics Co., Ltd.
[ 10.136200] usb 1-4: SerialNumber: 0x0001
[ 10.261374] Linux media interface: v0.10
[ 10.277148] Linux video capture interface: v2.00
[ 10.286631] uvcvideo: Found UVC 1.00 device USB2.0 0.3M UVC WebCam (04f2:b26f)
[ 10.305189] input: USB2.0 0.3M UVC WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input7
[ 10.305515] usbcore: registered new interface driver uvcvideo
[ 10.305521] USB Video Class driver (1.1.1)
[ 10.463808] Console: switching to colour frame buffer device 128x37
[ 10.471584] fb0: psbfb frame buffer device
[ 10.471589] drm: registered panic notifier
[ 10.471710] [drm] Initialized gma500 1.0.0 2011-06-06 for 0000:00:02.0 on minor 0
[ 10.471950] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 10.472027] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 10.687982] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00073/0x240000/0xa2400
[ 10.757173] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 10.995993] HDMI status: Codec=1 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 10.996557] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 10.997828] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 10.998950] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 10.998972] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 10.999040] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 10.999144] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080
[ 10.999387] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.999409] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.999426] usb usb2: Product: UHCI Host Controller
[ 10.999441] usb usb2: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[ 10.999457] usb usb2: SerialNumber: 0000:00:1d.0
[ 11.000260] hub 2-0:1.0: USB hub found
[ 11.000286] hub 2-0:1.0: 2 ports detected
[ 11.000633] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 11.000648] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 11.000688] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 11.000895] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000f060
[ 11.001127] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 11.001148] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 11.001166] usb usb3: Product: UHCI Host Controller
[ 11.001182] usb usb3: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[ 11.001199] usb usb3: SerialNumber: 0000:00:1d.1
[ 11.001880] hub 3-0:1.0: USB hub found
[ 11.001904] hub 3-0:1.0: 2 ports detected
[ 11.002275] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 11.002290] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 11.002332] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 11.002440] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040
[ 11.002605] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 11.002618] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 11.002631] usb usb4: Product: UHCI Host Controller
[ 11.002641] usb usb4: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[ 11.002652] usb usb4: SerialNumber: 0000:00:1d.2
[ 11.003250] hub 4-0:1.0: USB hub found
[ 11.003274] hub 4-0:1.0: 2 ports detected
[ 11.003658] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 11.003673] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 11.003718] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 11.003823] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020
[ 11.003993] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 11.004007] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 11.004019] usb usb5: Product: UHCI Host Controller
[ 11.004030] usb usb5: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[ 11.004041] usb usb5: SerialNumber: 0000:00:1d.3
[ 11.004905] hub 5-0:1.0: USB hub found
[ 11.004941] hub 5-0:1.0: 2 ports detected
[ 12.926595] Adding 2097148k swap on /dev/sda4. Priority:-1 extents:1 across:2097148k
[ 12.975744] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 13.546520] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 13.772568] loop: module loaded
[ 16.466113] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 20.066429] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input11
[ 21.351675] lp: driver loaded but no devices found
[ 21.385855] ppdev: user-space parallel port driver
[ 24.735754] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 30.346742] atl1c 0000:04:00.0: irq 47 for MSI/MSI-X
[ 30.432900] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 210.499059] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 210.934168] atl1c 0000:04:00.0: irq 47 for MSI/MSI-X
[ 211.019792] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 211.575980] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 215.261902] wlan0: authenticate with 00:1c:a2:d4:a0:b4 (try 1)
[ 215.266791] wlan0: authenticated
[ 215.266939] wlan0: associate with 00:1c:a2:d4:a0:b4 (try 1)
[ 215.272333] wlan0: RX AssocResp from 00:1c:a2:d4:a0:b4 (capab=0x411 status=0 aid=1)
[ 215.272350] wlan0: associated
[ 215.273458] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 225.491434] wlan0: no IPv6 routers present
[ 752.078912] device-mapper: uevent: version 1.0.3
[ 752.079284] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 763.981176] EFI Variables Facility v0.08 2004-May-17
[ 764.200803] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 764.201804] SGI XFS Quota Management subsystem
[ 764.210479] JFS: nTxBlock = 7985, nTxLock = 63886
[ 764.245993] NTFS driver 2.1.30 [Flags: R/W MODULE].
[ 764.285993] QNX4 filesystem 0.2.3 registered.
[ 764.406156] Btrfs loaded
[ 764.417198] fuse init (API version 7.17)
** Model information
not available
** Loaded modules:
fuse
btrfs
crc32c
libcrc32c
zlib_deflate
ufs
qnx4
hfsplus
hfs
minix
ntfs
vfat
msdos
fat
jfs
xfs
reiserfs
ext3
jbd
efivars
dm_mod
parport_pc
ppdev
lp
parport
cpufreq_powersave
cpufreq_conservative
cpufreq_userspace
cpufreq_stats
binfmt_misc
uinput
ext2
snd_mixer_oss
loop
snd_hda_codec_hdmi
joydev
snd_hda_codec_realtek
uvcvideo
videodev
media
arc4
ath9k
ath9k_common
ath9k_hw
ath
uhci_hcd
mac80211
snd_hda_intel
gma500_gfx
snd_hda_codec
eeepc_wmi
asus_wmi
snd_hwdep
snd_pcm
drm_kms_helper
sparse_keymap
snd_page_alloc
cfg80211
ehci_hcd
usbcore
snd_seq
snd_seq_device
snd_timer
iTCO_wdt
drm
atl1c
psmouse
serio_raw
snd
evdev
i2c_i801
i2c_algo_bit
rfkill
i2c_core
coretemp
pcspkr
acpi_cpufreq
iTCO_vendor_support
usb_common
soundcore
mperf
battery
processor
video
ac
button
wmi
power_supply
ext4
crc16
mbcache
jbd2
sd_mod
crc_t10dif
ahci
libahci
libata
scsi_mod
thermal
thermal_sys
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether 10:bf:48:6b:aa:22 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 44:6d:57:9a:26:6f brd ff:ff:ff:ff:ff:ff
inet 192.168.1.175/24 brd 192.168.1.255 scope global wlan0
inet6 fe80::466d:57ff:fe9a:266f/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
wlan0: 89351765 59837 0 0 0 0 0 0 2832373 32786 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
59475 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
59473 incoming packets delivered
32393 requests sent out
2 dropped because of missing route
Icmp:
1 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
echo requests: 1
1 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
echo replies: 1
IcmpMsg:
InType8: 1
OutType0: 1
Tcp:
9 active connections openings
0 passive connection openings
0 failed connection attempts
0 connection resets received
0 connections established
59423 segments received
32343 segments send out
8 segments retransmited
0 bad segments received.
1 resets sent
Udp:
31 packets received
0 packets to unknown port received.
0 packet receive errors
31 packets sent
UdpLite:
TcpExt:
2 packets pruned from receive queue because of socket buffer overrun
2 TCP sockets finished time wait in fast timer
79 delayed acks sent
Quick ack mode was activated 3 times
54894 packet headers predicted
49 acknowledgments not containing data payload received
19 predicted acknowledgments
1 other TCP timeouts
102 packets collapsed in receive queue due to low socket buffer
3 DSACKs sent for old packets
1 connections reset due to unexpected data
1 connections aborted due to timeout
IpExt:
InMcastPkts: 21
OutMcastPkts: 23
InBcastPkts: 10
InOctets: 88500150
OutOctets: 1768267
InMcastOctets: 3732
OutMcastOctets: 3844
InBcastOctets: 2048
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Atom Processor D2xxx/N2xxx DRAM Controller [8086:0bf1] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:84a9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor D2xxx/N2xxx Integrated Graphics Controller [8086:0be1] (rev 09) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:84a9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at dfc00000 (32-bit, non-prefetchable) [size=1M]
Region 1: I/O ports at f0e0 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: gma500
00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:8516]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at dff00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 40800000-409fffff
Prefetchable memory behind bridge: 0000000040a00000-0000000040bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: dfe00000-dfefffff
Prefetchable memory behind bridge: 0000000040600000-00000000407fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 40200000-403fffff
Prefetchable memory behind bridge: 0000000040400000-00000000405fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: dfd00000-dfdfffff
Prefetchable memory behind bridge: 0000000040000000-00000000401fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at f080 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at f060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at f040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at f020 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at dff05000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation NM10/ICH7 Family SATA Controller [AHCI mode] [8086:27c1] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 44
Region 0: I/O ports at f0d0 [size=8]
Region 1: I/O ports at f0c0 [size=4]
Region 2: I/O ports at f0b0 [size=8]
Region 3: I/O ports at f0a0 [size=4]
Region 4: I/O ports at f000 [size=16]
Region 5: Memory at dff04000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 20
Region 4: I/O ports at 0800 [size=32]
02:00.0 Network controller [0280]: Atheros Communications Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01)
Subsystem: Lite-On Communications Inc Device [11ad:6627]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at dfe00000 (64-bit, non-prefetchable) [size=512K]
Expansion ROM at dfe80000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
04:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8152 v2.0 Fast Ethernet [1969:2062] (rev c1)
Subsystem: ASUSTeK Computer Inc. Device [1043:8468]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at dfd00000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at e000 [size=128]
Capabilities: <access denied>
Kernel driver in use: atl1c
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 04f2:b26f Chicony Electronics Co., Ltd
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 7.2
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-4-686-pae (SMP w/4 CPU cores)
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-686-pae depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109.1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-686-pae recommends:
pn firmware-linux-free <none>
ii libc6-i686 2.13-38
Versions of packages linux-image-3.2.0-4-686-pae suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u2
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-686-pae/postinst/depmod-error-initrd-3.2.0-4-686-pae: false
linux-image-3.2.0-4-686-pae/prerm/removing-running-kernel-3.2.0-4-686-pae: true
linux-image-3.2.0-4-686-pae/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-686-pae/postinst/missing-firmware-3.2.0-4-686-pae:
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
From: Enrico Trombetta <enrico@Debian-EeePC.homenet.telecomitalia.it>
To: Debian Bug Tracking System <submit@bugs.debian.org>
Subject: Hibernation: invisible shell without X, crazy frame buffer with X(fbdev)
Message-ID: <[🔎] 20131020200544.20289.60419.reportbug@Debian-EeePC.homenet.telecomitalia.it>
X-Mailer: reportbug 6.4.4
Date: Sun, 20 Oct 2013 22:05:44 +0200
X-Debbugs-Cc: enrico@Debian-EeePC.homenet.telecomitalia.it
Package: src:linux
Version: 3.2.51-1
Severity: normal
Dear Maintainer,
I've some problems about Hibernation (aka Suspend-To-Disk, STD).
I've tried to hibernate my system with 'echo disk > /sys/power/state'; all seems work pretty.
After reboot, I've edited by grub the kernel options by adding 'resume=/dev/sda4' option.
After kernel boot, if I've done Hibernation command without X,
I don't see anything after kernel loading; I can't log in (I don't use DMs), I can only reboot with system button.
Else if I've done Hibernation command with X, frame buffer crazys (I use fbdev, see below if you want to know why).
Anyway, also in this case I have to press system button.
I'm sorry, but I don't know how can I help you because I can't monit my system when it is in sleep mode.
I think there is something doesn't go with GMA 3600 drivers, you should remember that gma500 driver is a kernel
experimental driver.
But, when I used 2.6 kernel, there wasn't DRM support for this GPU, so I used VESA drivers, but there was that bug.
My suspects are shifted on ACPI. I don't know where to search. I'm sorry, I am not yet a developer or a debugger.
-- Package-specific info:
** Version:
Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.46-1+deb7u1
** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-4-686-pae root=UUID=96ea1526-0f5b-4e66-aae3-60f578b6e87c ro quiet acpi_osi=Linux acpi_backlight=vendor
** Not tainted
** Kernel log:
[ 10.070749] gma500 0000:00:02.0: allocated 1024x600 fb
[ 10.071182] fbcon: psbfb (fb0) is primary device
[ 10.136154] usb 1-4: New USB device found, idVendor=04f2, idProduct=b26f
[ 10.136169] usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 10.136181] usb 1-4: Product: USB2.0 0.3M UVC WebCam
[ 10.136191] usb 1-4: Manufacturer: Chicony Electronics Co., Ltd.
[ 10.136200] usb 1-4: SerialNumber: 0x0001
[ 10.261374] Linux media interface: v0.10
[ 10.277148] Linux video capture interface: v2.00
[ 10.286631] uvcvideo: Found UVC 1.00 device USB2.0 0.3M UVC WebCam (04f2:b26f)
[ 10.305189] input: USB2.0 0.3M UVC WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input7
[ 10.305515] usbcore: registered new interface driver uvcvideo
[ 10.305521] USB Video Class driver (1.1.1)
[ 10.463808] Console: switching to colour frame buffer device 128x37
[ 10.471584] fb0: psbfb frame buffer device
[ 10.471589] drm: registered panic notifier
[ 10.471710] [drm] Initialized gma500 1.0.0 2011-06-06 for 0000:00:02.0 on minor 0
[ 10.471950] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 10.472027] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 10.687982] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00073/0x240000/0xa2400
[ 10.757173] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 10.995993] HDMI status: Codec=1 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 10.996557] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 10.997828] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 10.998950] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 10.998972] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 10.999040] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 10.999144] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080
[ 10.999387] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.999409] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.999426] usb usb2: Product: UHCI Host Controller
[ 10.999441] usb usb2: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[ 10.999457] usb usb2: SerialNumber: 0000:00:1d.0
[ 11.000260] hub 2-0:1.0: USB hub found
[ 11.000286] hub 2-0:1.0: 2 ports detected
[ 11.000633] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 11.000648] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 11.000688] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 11.000895] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000f060
[ 11.001127] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 11.001148] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 11.001166] usb usb3: Product: UHCI Host Controller
[ 11.001182] usb usb3: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[ 11.001199] usb usb3: SerialNumber: 0000:00:1d.1
[ 11.001880] hub 3-0:1.0: USB hub found
[ 11.001904] hub 3-0:1.0: 2 ports detected
[ 11.002275] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 11.002290] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 11.002332] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 11.002440] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040
[ 11.002605] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 11.002618] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 11.002631] usb usb4: Product: UHCI Host Controller
[ 11.002641] usb usb4: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[ 11.002652] usb usb4: SerialNumber: 0000:00:1d.2
[ 11.003250] hub 4-0:1.0: USB hub found
[ 11.003274] hub 4-0:1.0: 2 ports detected
[ 11.003658] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 11.003673] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 11.003718] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 11.003823] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020
[ 11.003993] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 11.004007] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 11.004019] usb usb5: Product: UHCI Host Controller
[ 11.004030] usb usb5: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[ 11.004041] usb usb5: SerialNumber: 0000:00:1d.3
[ 11.004905] hub 5-0:1.0: USB hub found
[ 11.004941] hub 5-0:1.0: 2 ports detected
[ 12.926595] Adding 2097148k swap on /dev/sda4. Priority:-1 extents:1 across:2097148k
[ 12.975744] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 13.546520] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 13.772568] loop: module loaded
[ 16.466113] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 20.066429] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input11
[ 21.351675] lp: driver loaded but no devices found
[ 21.385855] ppdev: user-space parallel port driver
[ 24.735754] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 30.346742] atl1c 0000:04:00.0: irq 47 for MSI/MSI-X
[ 30.432900] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 210.499059] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 210.934168] atl1c 0000:04:00.0: irq 47 for MSI/MSI-X
[ 211.019792] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 211.575980] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 215.261902] wlan0: authenticate with 00:1c:a2:d4:a0:b4 (try 1)
[ 215.266791] wlan0: authenticated
[ 215.266939] wlan0: associate with 00:1c:a2:d4:a0:b4 (try 1)
[ 215.272333] wlan0: RX AssocResp from 00:1c:a2:d4:a0:b4 (capab=0x411 status=0 aid=1)
[ 215.272350] wlan0: associated
[ 215.273458] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 225.491434] wlan0: no IPv6 routers present
[ 752.078912] device-mapper: uevent: version 1.0.3
[ 752.079284] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 763.981176] EFI Variables Facility v0.08 2004-May-17
[ 764.200803] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 764.201804] SGI XFS Quota Management subsystem
[ 764.210479] JFS: nTxBlock = 7985, nTxLock = 63886
[ 764.245993] NTFS driver 2.1.30 [Flags: R/W MODULE].
[ 764.285993] QNX4 filesystem 0.2.3 registered.
[ 764.406156] Btrfs loaded
[ 764.417198] fuse init (API version 7.17)
** Model information
not available
** Loaded modules:
fuse
btrfs
crc32c
libcrc32c
zlib_deflate
ufs
qnx4
hfsplus
hfs
minix
ntfs
vfat
msdos
fat
jfs
xfs
reiserfs
ext3
jbd
efivars
dm_mod
parport_pc
ppdev
lp
parport
cpufreq_powersave
cpufreq_conservative
cpufreq_userspace
cpufreq_stats
binfmt_misc
uinput
ext2
snd_mixer_oss
loop
snd_hda_codec_hdmi
joydev
snd_hda_codec_realtek
uvcvideo
videodev
media
arc4
ath9k
ath9k_common
ath9k_hw
ath
uhci_hcd
mac80211
snd_hda_intel
gma500_gfx
snd_hda_codec
eeepc_wmi
asus_wmi
snd_hwdep
snd_pcm
drm_kms_helper
sparse_keymap
snd_page_alloc
cfg80211
ehci_hcd
usbcore
snd_seq
snd_seq_device
snd_timer
iTCO_wdt
drm
atl1c
psmouse
serio_raw
snd
evdev
i2c_i801
i2c_algo_bit
rfkill
i2c_core
coretemp
pcspkr
acpi_cpufreq
iTCO_vendor_support
usb_common
soundcore
mperf
battery
processor
video
ac
button
wmi
power_supply
ext4
crc16
mbcache
jbd2
sd_mod
crc_t10dif
ahci
libahci
libata
scsi_mod
thermal
thermal_sys
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether 10:bf:48:6b:aa:22 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 44:6d:57:9a:26:6f brd ff:ff:ff:ff:ff:ff
inet 192.168.1.175/24 brd 192.168.1.255 scope global wlan0
inet6 fe80::466d:57ff:fe9a:266f/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
wlan0: 89351765 59837 0 0 0 0 0 0 2832373 32786 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
59475 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
59473 incoming packets delivered
32393 requests sent out
2 dropped because of missing route
Icmp:
1 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
echo requests: 1
1 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
echo replies: 1
IcmpMsg:
InType8: 1
OutType0: 1
Tcp:
9 active connections openings
0 passive connection openings
0 failed connection attempts
0 connection resets received
0 connections established
59423 segments received
32343 segments send out
8 segments retransmited
0 bad segments received.
1 resets sent
Udp:
31 packets received
0 packets to unknown port received.
0 packet receive errors
31 packets sent
UdpLite:
TcpExt:
2 packets pruned from receive queue because of socket buffer overrun
2 TCP sockets finished time wait in fast timer
79 delayed acks sent
Quick ack mode was activated 3 times
54894 packet headers predicted
49 acknowledgments not containing data payload received
19 predicted acknowledgments
1 other TCP timeouts
102 packets collapsed in receive queue due to low socket buffer
3 DSACKs sent for old packets
1 connections reset due to unexpected data
1 connections aborted due to timeout
IpExt:
InMcastPkts: 21
OutMcastPkts: 23
InBcastPkts: 10
InOctets: 88500150
OutOctets: 1768267
InMcastOctets: 3732
OutMcastOctets: 3844
InBcastOctets: 2048
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Atom Processor D2xxx/N2xxx DRAM Controller [8086:0bf1] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:84a9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor D2xxx/N2xxx Integrated Graphics Controller [8086:0be1] (rev 09) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:84a9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at dfc00000 (32-bit, non-prefetchable) [size=1M]
Region 1: I/O ports at f0e0 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: gma500
00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:8516]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at dff00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 40800000-409fffff
Prefetchable memory behind bridge: 0000000040a00000-0000000040bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: dfe00000-dfefffff
Prefetchable memory behind bridge: 0000000040600000-00000000407fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 40200000-403fffff
Prefetchable memory behind bridge: 0000000040400000-00000000405fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: dfd00000-dfdfffff
Prefetchable memory behind bridge: 0000000040000000-00000000401fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at f080 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at f060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at f040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at f020 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at dff05000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation NM10/ICH7 Family SATA Controller [AHCI mode] [8086:27c1] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 44
Region 0: I/O ports at f0d0 [size=8]
Region 1: I/O ports at f0c0 [size=4]
Region 2: I/O ports at f0b0 [size=8]
Region 3: I/O ports at f0a0 [size=4]
Region 4: I/O ports at f000 [size=16]
Region 5: Memory at dff04000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 20
Region 4: I/O ports at 0800 [size=32]
02:00.0 Network controller [0280]: Atheros Communications Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01)
Subsystem: Lite-On Communications Inc Device [11ad:6627]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at dfe00000 (64-bit, non-prefetchable) [size=512K]
Expansion ROM at dfe80000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
04:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8152 v2.0 Fast Ethernet [1969:2062] (rev c1)
Subsystem: ASUSTeK Computer Inc. Device [1043:8468]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at dfd00000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at e000 [size=128]
Capabilities: <access denied>
Kernel driver in use: atl1c
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 04f2:b26f Chicony Electronics Co., Ltd
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 7.2
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-4-686-pae (SMP w/4 CPU cores)
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-686-pae depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109.1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-686-pae recommends:
pn firmware-linux-free <none>
ii libc6-i686 2.13-38
Versions of packages linux-image-3.2.0-4-686-pae suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u2
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-686-pae/postinst/depmod-error-initrd-3.2.0-4-686-pae: false
linux-image-3.2.0-4-686-pae/prerm/removing-running-kernel-3.2.0-4-686-pae: true
linux-image-3.2.0-4-686-pae/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-686-pae/postinst/missing-firmware-3.2.0-4-686-pae:
Reply to: