Bug#725906: linux-image-3.10-3-amd64: latency when increasing or decreasing brightness
Package: src:linux
Version: 3.10.11-1
Severity: normal
Tags: upstream
Dear Maintainer,
To change the backlight level takes several seconds and freezes system
during this time. It happens both with keybord shortcuts and with
graphical interface. With kernel 3.2 and 3.7, I did not have this bug
(only in 3.10).
-- Package-specific info:
** Version:
Linux version 3.10-3-amd64 (debian-kernel@lists.debian.org) (gcc version
4.7.3 (Debian 4.7.3-7) ) #1 SMP Debian 3.10.11-1 (2013-09-10)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.10-3-amd64
root=UUID=d619d586-6cef-46e4-954f-47d8d70e26df ro quiet
** Not tainted
** Kernel log:
[12975.317646] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300
mBi, 2000 mBm)
[12976.286538] PM: Syncing filesystems ... done.
[12976.287995] PM: Preparing system for mem sleep
[12976.292560] (NULL device *): firmware: agent loaded
iwlwifi-6000-4.ucode into memory
[12976.293235] (NULL device *): firmware: agent loaded
intel-ucode/06-3a-09 into memory
[12976.293248] Freezing user space processes ... (elapsed 0.01 seconds)
done.
[12976.309245] Freezing remaining freezable tasks ... (elapsed 0.01
seconds) done.
[12976.325247] PM: Entering mem sleep
[12976.325337] Suspending console(s) (use no_console_suspend to debug)
[12976.325658] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[12976.325698] sd 0:0:0:0: [sda] Stopping disk
[12976.340493] mei_me 0000:00:16.0: suspend
[12976.929815] PM: suspend of devices complete after 603.778 msecs
[12976.929976] PM: late suspend of devices complete after 0.158 msecs
[12976.945861] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[12976.961942] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[12977.045897] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[12977.077890] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[12977.093911] PM: noirq suspend of devices complete after 163.784 msecs
[12977.094223] ACPI: Preparing to enter system sleep state S3
[12977.431602] PM: Saving platform NVS memory
[12977.432361] Disabling non-boot CPUs ...
[12977.534247] smpboot: CPU 1 is now offline
[12977.638338] smpboot: CPU 2 is now offline
[12977.742430] smpboot: CPU 3 is now offline
[12977.744060] ACPI: Low-level resume complete
[12977.744111] PM: Restoring platform NVS memory
[12977.744668] CPU0: Thermal monitoring handled by SMI
[12977.744694] Enabling non-boot CPUs ...
[12977.744828] smpboot: Booting Node 0 Processor 1 APIC 0x2
[12977.756046] CPU1 microcode updated early to revision 0x19, date =
2013-06-13
[12977.756640] CPU1: Thermal monitoring handled by SMI
[12977.758893] Intel pstate controlling: cpu 1
[12977.758971] CPU1 is up
[12977.759070] smpboot: Booting Node 0 Processor 2 APIC 0x1
[12977.769806] CPU2 microcode updated early to revision 0x19, date =
2013-06-13
[12977.770820] CPU2: Thermal monitoring handled by SMI
[12977.773102] Intel pstate controlling: cpu 2
[12977.773153] CPU2 is up
[12977.773234] smpboot: Booting Node 0 Processor 3 APIC 0x3
[12977.784677] CPU3: Thermal monitoring handled by SMI
[12977.786980] Intel pstate controlling: cpu 3
[12977.787029] CPU3 is up
[12977.791042] ACPI: Waking up from system sleep state S3
[12978.117139] _handle_hotplug_event_root: Bus check notify on \_SB_.PCI0
[12978.264817] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[12978.312857] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[12978.344876] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[12978.393011] PM: noirq resume of devices complete after 160.038 msecs
[12978.393148] PM: early resume of devices complete after 0.112 msecs
[12978.393175] i915 0000:00:02.0: setting latency timer to 64
[12978.393188] xhci_hcd 0000:00:14.0: setting latency timer to 64
[12978.393234] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[12978.393427] ahci 0000:00:1f.2: setting latency timer to 64
[12978.393545] ehci-pci 0000:00:1a.0: setting latency timer to 64
[12978.393690] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[12978.393740] ehci-pci 0000:00:1d.0: setting latency timer to 64
[12978.489224] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[12978.489238] e1000e 0000:00:19.0: setting latency timer to 64
[12978.489270] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[12978.565126] dpm_run_callback(): pnp_bus_resume+0x0/0x69 returns -19
[12978.565127] PM: Device 00:09 failed to resume: error -19
[12978.605167] usb 1-1.5: reset high-speed USB device number 3 using
ehci-pci
[12978.693989] i915: No ACPI video bus found
[12978.769299] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[12978.769474] usb 2-1.8: reset full-speed USB device number 3 using
ehci-pci
[12978.777285] ata5: SATA link down (SStatus 0 SControl 300)
[12978.973635] usb 3-1: reset full-speed USB device number 2 using xhci_hcd
[12978.983954] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
succeeded
[12978.983957] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE
LOCK) filtered out
[12978.983960] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
CONFIGURATION OVERLAY) filtered out
[12978.984031] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by
device (Stat=0x51 Err=0x04)
[12978.990828] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff8801162b16c0
[12978.990833] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff8801162b1680
[12978.990836] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff8801162b1640
[12978.992983] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
succeeded
[12978.993002] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE
LOCK) filtered out
[12978.993004] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
CONFIGURATION OVERLAY) filtered out
[12978.993061] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by
device (Stat=0x51 Err=0x04)
[12978.993224] ata1.00: configured for UDMA/133
[12979.005568] sd 0:0:0:0: [sda] Starting disk
[12979.141748] usb 2-1.8.2: reset full-speed USB device number 4 using
ehci-pci
[12979.234655] PM: resume of devices complete after 840.743 msecs
[12979.234923] PM: Finishing wakeup.
[12979.234925] Restarting tasks ... done.
[12979.237759] video LNXVIDEO:00: Restoring backlight state
[12979.963739] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[12980.066488] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[12980.066602] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[12980.067765] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[12980.074923] iwlwifi 0000:02:00.0: Radio type=0x0-0x3-0x1
[12980.314622] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[12980.345420] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[12986.865652] wlan0: authenticate with f4:ca:e5:a2:14:ac
[12986.878049] wlan0: send auth to f4:ca:e5:a2:14:ac (try 1/3)
[12986.880810] wlan0: authenticated
[12986.884499] wlan0: associate with f4:ca:e5:a2:14:ac (try 1/3)
[12986.888395] wlan0: RX AssocResp from f4:ca:e5:a2:14:ac (capab=0x411
status=0 aid=2)
[12986.892681] wlan0: associated
[12986.892724] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
** Model information
sys_vendor: Dell Inc.
product_name: Latitude 6430U
product_version: 01
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: A01
board_vendor: Dell Inc.
board_name: 0VH1XC
board_version: A00
** Loaded modules:
ppdev
lp
binfmt_misc
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
dns_resolver
fscache
sunrpc
nls_utf8
nls_cp437
vfat
fat
loop
fuse
snd_hda_codec_hdmi
iTCO_wdt
iTCO_vendor_support
snd_hda_codec_idt
dell_wmi
sparse_keymap
joydev
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
videodev
media
dell_laptop
dcdbas
mperf
coretemp
kvm_intel
kvm
crc32c_intel
ghash_clmulni_intel
aesni_intel
aes_x86_64
ablk_helper
cryptd
lrw
gf128mul
glue_helper
microcode
psmouse
serio_raw
efi_pstore
efivars
arc4
i2c_i801
iwldvm
mac80211
snd_hda_intel
snd_hda_codec
iwlwifi
snd_hwdep
snd_pcm
snd_page_alloc
snd_seq
lpc_ich
snd_seq_device
mfd_core
snd_timer
cfg80211
rfkill
snd
soundcore
evdev
i915
wmi
battery
parport_pc
parport
drm_kms_helper
video
drm
i2c_algo_bit
i2c_core
mei_me
ac
processor
mei
button
ext4
crc16
jbd2
mbcache
sg
sd_mod
crc_t10dif
hid_logitech_dj
usbhid
hid
ahci
libahci
sdhci_pci
sdhci
libata
xhci_hcd
ehci_pci
ehci_hcd
scsi_mod
mmc_core
e1000e
ptp
pps_core
usbcore
usb_common
thermal
thermal_sys
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor
DRAM Controller [8086:0154] (rev 09)
Subsystem: Dell Device [1028:0584]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core
processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA
controller])
Subsystem: Dell Device [1028:0584]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series
Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30
[XHCI])
Subsystem: Dell Device [1028:0584]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f7e20000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210
Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: Dell Device [1028:0584]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at f7e3c000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit
Network Connection [8086:1502] (rev 04)
Subsystem: Dell Device [1028:0584]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 48
Region 0: Memory at f7e00000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f7e39000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at f080 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series
Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04)
(prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0584]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7e38000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series
Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: Dell Device [1028:0584]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f7e30000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series
Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series
Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: f7d00000-f7dfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series
Chipset Family PCI Express Root Port 6 [8086:1e1a] (rev c4) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: f7c00000-f7cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series
Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04)
(prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0584]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: Memory at f7e37000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation QM77 Express Chipset LPC
Controller [8086:1e55] (rev 04)
Subsystem: Dell Device [1028:0584]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset
Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if
01 [AHCI 1.0])
Subsystem: Dell Device [1028:0584]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 44
Region 0: I/O ports at f0d0 [size=8]
Region 1: I/O ports at f0c0 [size=4]
Region 2: I/O ports at f0b0 [size=8]
Region 3: I/O ports at f0a0 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7e36000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset
Family SMBus Controller [8086:1e22] (rev 04)
Subsystem: Dell Device [1028:0584]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7e35000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
02:00.0 Network controller [0280]: Intel Corporation Centrino Ultimate-N
6300 [8086:422b] (rev 35)
Subsystem: Intel Corporation Centrino Ultimate-N 6300 3x3 AGN [8086:1121]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f7d00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
03:00.0 SD Host controller [0805]: O2 Micro, Inc. Device [1217:8221]
(rev 05) (prog-if 01)
Subsystem: Dell Device [1028:0584]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f7c00000 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
** USB devices:
Bus 002 Device 004: ID 0b97:7772 O2 Micro, Inc. OZ776 CCID Smartcard Reader
Bus 002 Device 003: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 1bcf:289b Sunplus Innovation Technology Inc.
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'unstable'), (500,
'testing'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.10-3-amd64 (SMP w/4 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.10-3-amd64 depends on:
ii debconf [debconf-2.0] 1.5.51
ii initramfs-tools [linux-initramfs-tool] 0.114
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.10-3-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.10-3-amd64 suggests:
pn debian-kernel-handbook <none>
ii extlinux 3:4.05+dfsg-6+deb7u3
pn linux-doc-3.10 <none>
Versions of packages linux-image-3.10-3-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.40
pn firmware-libertas <none>
ii firmware-linux 0.40
ii firmware-linux-nonfree 0.40
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.10-3-amd64/postinst/missing-firmware-3.10-3-amd64:
linux-image-3.10-3-amd64/postinst/depmod-error-initrd-3.10-3-amd64: false
linux-image-3.10-3-amd64/prerm/removing-running-kernel-3.10-3-amd64: true
linux-image-3.10-3-amd64/postinst/ignoring-ramdisk:
Reply to: