--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.26-1-amd64: Cannot mute cx8800 v4l card
- From: Stefan Ott <stefan@ott.net>
- Date: Sun, 14 Dec 2008 04:32:22 +0100
- Message-id: <20081214033222.10727.60945.reportbug@ssl.buzzernet.net>
Package: linux-image-2.6.26-1-amd64
Version: 2.6.26-11
Severity: normal
Hi
I cannot seem to mute my cx8800 tv/radio tuner card (tried with various radio
applications). The commands run without errors (eg. "radio -c /dev/radio0 -qm")
but the card keeps sending audio. Reloading the kernel module doesn't help
either, it only resets the tuner's frequency.
If I manually set the tuner type (eg. using radio=59 or radio=61), muting
suddenly seems to work - unfortunately, this breaks tuning (ie. i get white
noise when i start the radio application but as soon as i change frequency all
audio stops).
IMHO this means that there might have to be a new tuner type, using the tuning
mechanism from the auto-detected type and muting/unmuting from type 59 or 61.
My lspci entries for the card are:
05:04.1 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] [14f1:8811] (rev 03)
Subsystem: Hauppauge computer works Inc. Hauppauge WinTV 34xxx models [0070:3401]
(for details, see below)
cheers
Stefan
-- Package-specific info:
** Version:
Linux version 2.6.26-1-amd64 (Debian 2.6.26-11) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Wed Nov 26 18:26:02 UTC 2008
** Command line:
root=/dev/md1 ro irqpoll vga=0x317
** Not tainted
** Kernel log:
[ 7.331482] md: md1 stopped.
[ 7.387476] md: bind<sdb6>
[ 7.395471] md: bind<sda6>
[ 7.403466] raid1: raid set md1 active with 2 out of 2 mirrors
[ 7.495048] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 7.501992] SGI XFS Quota Management subsystem
[ 7.511043] Filesystem "md1": Disabling barriers, not supported by the underlying device
[ 7.515213] XFS mounting filesystem md1
[ 7.598957] Ending clean XFS mount for filesystem: md1
[ 9.239769] udevd version 125 started
[ 9.868827] input: Power Button (FF) as /class/input/input5
[ 9.923407] ACPI: Power Button (FF) [PWRF]
[ 9.928959] input: Power Button (CM) as /class/input/input6
[ 9.988223] ACPI: Power Button (CM) [PWRB]
[ 10.103222] input: PC Speaker as /class/input/input7
[ 10.178000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 10.182083] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0460)
[ 10.188775] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.257155] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 18 (level, low) -> IRQ 18
[ 10.537012] Error: Driver 'pcspkr' is already registered, aborting...
[ 10.566113] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 10.570249] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 10.600332] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 12.236344] Filesystem "md1": Disabling barriers, not supported by the underlying device
[ 13.226982] loop: module loaded
[ 13.291520] w83627ehf: Found W83627DHG chip at 0x290
[ 13.314149] coretemp coretemp.0: Using relative temperature scale!
[ 13.319572] coretemp coretemp.1: Using relative temperature scale!
[ 13.388409] md: md0 stopped.
[ 13.582997] md: bind<sdb5>
[ 13.591014] md: bind<sda5>
[ 13.645679] raid1: raid set md0 active with 2 out of 2 mirrors
[ 13.656061] md: md2 stopped.
[ 13.706166] md: bind<sdb7>
[ 13.714604] md: bind<sda7>
[ 13.744115] raid1: raid set md2 active with 2 out of 2 mirrors
[ 13.748230] md: md3 stopped.
[ 13.823695] md: bind<sdb8>
[ 13.828373] md: bind<sda8>
[ 13.862518] raid1: raid set md3 active with 2 out of 2 mirrors
[ 14.613632] kjournald starting. Commit interval 5 seconds
[ 14.647049] EXT3 FS on md0, internal journal
[ 14.655429] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.683412] Filesystem "md2": Disabling barriers, not supported by the underlying device
[ 14.683472] XFS mounting filesystem md2
[ 14.768482] Ending clean XFS mount for filesystem: md2
[ 14.812902] Filesystem "md3": Disabling barriers, not supported by the underlying device
[ 14.816598] XFS mounting filesystem md3
[ 15.088970] Ending clean XFS mount for filesystem: md3
[ 16.515531] sky2 eth0: enabling interface
[ 18.310461] NET: Registered protocol family 10
[ 18.314189] lo: Disabled Privacy Extensions
[ 18.317060] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.387798] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 18.392605] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 26.695365] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 26.864082] [drm] Initialized drm 1.1.0 20060810
[ 26.876838] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 26.876838] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 27.289257] [drm] Setting GART location based on new memory map
[ 27.289257] [drm] Loading R500 Microcode
[ 27.289257] [drm] Num pipes: 3
[ 27.289257] [drm] writeback test succeeded in 1 usecs
[ 29.548067] eth0: no IPv6 routers present
[ 846.832536] Linux video capture interface: v2.00
[ 846.904023] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
[ 846.904062] ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 846.904898] cx88[0]: subsystem: 0070:3401, board: Hauppauge WinTV 34xxx models [card=1,autodetected]
[ 846.904901] cx88[0]: TV tuner type -1, Radio tuner type -1
[ 847.044757] tuner' 1-0061: chip found @ 0xc2 (cx88[0])
[ 847.091648] tveeprom 1-0050: Hauppauge model 34614, rev E142, serial# 6226607
[ 847.091648] tveeprom 1-0050: tuner model is Temic 4009FR5 (idx 42, type 20)
[ 847.091648] tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04)
[ 847.091648] tveeprom 1-0050: audio processor is CX881 (idx 31)
[ 847.091648] tveeprom 1-0050: has radio
[ 847.091648] cx88[0]: warning: unknown hauppauge model #34614
[ 847.091648] cx88[0]: hauppauge eeprom: model=34614
[ 847.153550] tuner-simple 1-0061: creating new instance
[ 847.153550] tuner-simple 1-0061: type set to 20 (Temic PAL_BG (4009 FR5) or PAL_I (4069 FR5))
[ 847.153550] input: cx88 IR (Hauppauge WinTV 34xxx as /class/input/input8
[ 847.215176] cx88[0]/0: found at 0000:05:04.0, rev: 3, irq: 22, latency: 20, mmio: 0xfc000000
[ 847.215215] cx88[0]/0: registered device video0 [v4l2]
[ 847.215232] cx88[0]/0: registered device vbi0
[ 847.215249] cx88[0]/0: registered device radio0
** Loaded modules:
Module Size Used by
tuner_simple 17556 1
tuner_types 21760 1 tuner_simple
tuner 29260 0
cx8800 37396 5
cx88xx 73256 1 cx8800
ir_common 47108 1 cx88xx
i2c_algo_bit 10244 1 cx88xx
tveeprom 18052 1 cx88xx
compat_ioctl32 12288 1 cx8800
videodev 35840 9 tuner,cx8800,cx88xx,compat_ioctl32
v4l1_compat 17284 1 videodev
v4l2_common 16384 2 tuner,cx8800
videobuf_dma_sg 17412 2 cx8800,cx88xx
videobuf_core 23300 3 cx8800,cx88xx,videobuf_dma_sg
btcx_risc 9096 2 cx8800,cx88xx
radeon 133920 2
drm 91488 3 radeon
ipv6 288328 29
acpi_cpufreq 11792 0
cpufreq_powersave 6400 0
cpufreq_ondemand 11792 2
cpufreq_conservative 11784 0
cpufreq_stats 9120 0
freq_table 9344 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats
cpufreq_userspace 8452 0
ext3 125072 1
jbd 51240 1 ext3
mbcache 12804 1 ext3
coretemp 11008 0
w83627ehf 26512 0
hwmon_vid 7296 1 w83627ehf
loop 19468 0
snd_hda_intel 434776 3
snd_pcm_oss 41760 0
snd_pcm 81672 2 snd_hda_intel,snd_pcm_oss
snd_mixer_oss 18816 2 snd_pcm_oss
snd_seq_dummy 7428 0
snd_seq_oss 33152 0
snd_seq_midi_event 11904 1 snd_seq_oss
snd_seq 54304 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_timer 25744 2 snd_pcm,snd_seq
snd_seq_device 11668 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd 63688 12 snd_hda_intel,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_seq,snd_timer,snd_seq_device
soundcore 12064 2 snd
i2c_i801 13596 0
snd_page_alloc 13072 2 snd_hda_intel,snd_pcm
i2c_core 27936 7 tuner_simple,tuner,cx88xx,i2c_algo_bit,tveeprom,v4l2_common,i2c_i801
iTCO_wdt 15696 0
psmouse 42268 0
pcspkr 7040 0
serio_raw 9860 0
intel_agp 31728 0
button 11680 0
joydev 14848 0
evdev 14208 12
xfs 475432 3
raid1 24192 4
md_mod 80164 5 raid1
sd_mod 29376 10
ide_cd_mod 36360 0
cdrom 37928 1 ide_cd_mod
ata_piix 22660 8
ata_generic 10116 0
libata 165472 2 ata_piix,ata_generic
scsi_mod 160760 2 sd_mod,libata
dock 14112 1 libata
usbhid 45792 0
hid 41792 1 usbhid
ff_memless 9224 1 usbhid
floppy 61672 0
ide_pci_generic 9220 0 [permanent]
sky2 48004 0
jmicron 6912 0 [permanent]
ide_core 128284 3 ide_cd_mod,ide_pci_generic,jmicron
ehci_hcd 36108 0
uhci_hcd 25760 0
thermal 22688 0
processor 42304 2 acpi_cpufreq,thermal
fan 9352 0
thermal_sys 17728 3 thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02)
Subsystem: ABIT Computer Corp. Device [147b:1085]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fda00000-fdafffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Device [147b:1085]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at ff00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Device [147b:1085]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at fe00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Device [147b:1085]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at fd00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI])
Subsystem: ABIT Computer Corp. Device [147b:1085]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02)
Subsystem: ABIT Computer Corp. Device [147b:1085]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fdff8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: fd800000-fd8fffff
Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fdc00000-fdcfffff
Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Device [147b:1085]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at fc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Device [147b:1085]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at fb00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Device [147b:1085]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at fa00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI])
Subsystem: ABIT Computer Corp. Device [147b:1085]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fdffe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fb000000-fcffffff
Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801IB (ICH9) LPC Interface Controller [8086:2918] (rev 02)
Subsystem: Intel Corporation 82801IB (ICH9) LPC Interface Controller [8086:2918]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.2 IDE interface [0101]: Intel Corporation 82801IB (ICH9) 2 port SATA IDE Controller [8086:2921] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ABIT Computer Corp. Device [147b:1085]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at f900 [size=8]
Region 1: I/O ports at f800 [size=4]
Region 2: I/O ports at f700 [size=8]
Region 3: I/O ports at f600 [size=4]
Region 4: I/O ports at f500 [size=16]
Region 5: I/O ports at f400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix, ata_generic, ide-pci-generic
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02)
Subsystem: ABIT Computer Corp. Device [147b:1085]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 18
Region 0: Memory at fdffd000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller [8086:2926] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: ABIT Computer Corp. Device [147b:1085]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at f200 [size=8]
Region 1: I/O ports at f100 [size=4]
Region 2: I/O ports at f000 [size=8]
Region 3: I/O ports at ef00 [size=4]
Region 4: I/O ports at ee00 [size=16]
Region 5: I/O ports at ed00 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix, ata_generic, ide-pci-generic
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV570 [Radeon X1950 Pro] [1002:7280] (rev 9a) (prog-if 00 [VGA controller])
Subsystem: Hightech Information System Ltd. Device [1787:2204]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fdaf0000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at ae00 [size=256]
[virtual] Expansion ROM at fda00000 [disabled] [size=128K]
Capabilities: <access denied>
01:00.1 Display controller [0380]: ATI Technologies Inc RV570 [Radeon X1950 Pro] (secondary) [1002:72a0] (rev 9a)
Subsystem: Hightech Information System Ltd. Device [1787:2205]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at fdae0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
03:00.0 IDE interface [0101]: JMicron Technologies, Inc. JMB368 IDE controller [197b:2368] (prog-if 85 [Master SecO PriO])
Subsystem: JMicron Technologies, Inc. JMB368 IDE controller [197b:2368]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at df00 [size=8]
Region 1: I/O ports at de00 [size=4]
Region 2: I/O ports at dd00 [size=8]
Region 3: I/O ports at dc00 [size=4]
Region 4: I/O ports at db00 [size=16]
[virtual] Expansion ROM at fdd00000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: JMicron IDE
Kernel modules: ata_generic, jmicron, ide-pci-generic
04:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller [11ab:4364] (rev 13)
Subsystem: ABIT Computer Corp. Device [147b:1085]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fdcfc000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at be00 [size=256]
[virtual] Expansion ROM at fdb00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: sky2
Kernel modules: sky2
05:04.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 03)
Subsystem: Hauppauge computer works Inc. Hauppauge WinTV 34xxx models [0070:3401]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 20 (5000ns min, 13750ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx8800
Kernel modules: cx8800
05:04.1 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] [14f1:8811] (rev 03)
Subsystem: Hauppauge computer works Inc. Hauppauge WinTV 34xxx models [0070:3401]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 4 (1000ns min, 63750ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 3
Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel modules: cx88-alsa
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (700, 'testing'), (600, 'unstable'), (501, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92j tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
linux-image-2.6.26-1-amd64 recommends no packages.
Versions of packages linux-image-2.6.26-1-amd64 suggests:
ii grub 0.97-47 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information excluded
--- End Message ---