Bug#687915: linux-image-3.2.0-3-686-pae: general protection fault when plugging in power on Asus EeePC 900
Package: src:linux
Version: 3.2.23-1
Severity: normal
I had the wireless card enabled for a couple minutes before noticing
that the battery on this Asus EeePC 900 was rather low.
I plugged it into wall power, and immediately as the battery started
charging the following error message showed up on the screen (making
my X11 session inaccessible):
Sep 16 15:24:45 pip kernel: [35635.074942] general protection fault: 0004 [#1] SMP
Sep 16 15:24:45 pip kernel: [35635.075059] Modules linked in: arc4 atl2 nfnetlink bnep rfcomm bluetooth crc16 binfmt_misc uinput fuse ath5k ath mac80211 cfg80211 loop joydev snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss i915 snd_pcm drm_kms_helper iTCO_wdt uvcvideo psmouse snd_page_alloc drm iTCO_vendor_support snd_timer i2c_algo_bit videodev snd media serio_raw evdev rng_core soundcore i2c_core battery eeepc_laptop ac video sparse_keymap power_supply rfkill processor button ext3 mbcache jbd btrfs crc32c libcrc32c zlib_deflate ohci_hcd sha256_generic cryptd aes_i586 aes_generic cbc usbhid hid usb_storage uas dm_crypt dm_mod raid1 md_mod sg sd_mod crc_t10dif ata_generic ata_piix ahci libahci libata scsi_mod uhci_hcd ehci_hcd usbcore thermal thermal_sys usb_common [last unloaded: atl2]
Sep 16 15:24:45 pip kernel: [35635.076738]
Sep 16 15:24:45 pip kernel: [35635.076771] Pid: 17665, comm: pidof Not tainted 3.2.0-3-686-pae #1 ASUSTeK Computer INC. 900/900
Sep 16 15:24:45 pip kernel: [35635.076815] EIP: 0060:[<c10caa62>] EFLAGS: 00010206 CPU: 0
Sep 16 15:24:45 pip kernel: [35635.076815] EIP is at sys_close+0x18/0x89
Sep 16 15:24:45 pip kernel: [35635.076815] EAX: f25bc1b0 EBX: 00000004 ECX: 00000000 EDX: 000000df
Sep 16 15:24:45 pip kernel: [35635.076815] ESI: 00000003 EDI: 00000000 EBP: f25e8000 ESP: f25e9fa8
Sep 16 15:24:45 pip kernel: [35635.076815] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Sep 16 15:24:45 pip kernel: [35635.076815] Process pidof (pid: 17665, ti=f25e8000 task=f25bc1c0 task.ti=f25e8000)
Sep 16 15:24:45 pip kernel: [35635.076815] Stack:
Sep 16 15:24:45 pip kernel: [35635.076815] 00000004 086715f0 c12c419f 00000004 00000000 b76fcff4 086715f0 00000000
Sep 16 15:24:45 pip kernel: [35635.076815] bfd1cdc8 00000006 0000007b 0000007b 00000000 00000033 00000006 b7726424
Sep 16 15:24:45 pip kernel: [35635.076815] 00000073 00000286 bfd1cd94 0000007b 0042904c 0042904c
Sep 16 15:24:45 pip kernel: [35635.076815] Call Trace:
Sep 16 15:24:45 pip kernel: [35635.076815] [<c12c419f>] ? sysenter_do_call+0x12/0x28
Sep 16 15:24:45 pip kernel: [35635.076815] Code: d8 e8 d2 ef 02 00 89 d8 e8 16 21 00 00 89 f0 5b 5e 5f c3 56 53 8b 74 24 0c 64 a1 0c 4f 47 c1 4a 04 a4 02 00 00 8d 43 00 8b d2 4e <1f> 00 8b 53 04 3b 32 73 56 8b 42 04 8b 04 b0 85 c0 74 4c 8b ff
Sep 16 15:24:45 pip kernel: [35635.076815] EIP: [<c10caa62>] sys_close+0x18/0x89 SS:ESP 0068:f25e9fa8
Sep 16 15:24:45 pip kernel: [35635.279291] ---[ end trace 5800fe6bc9a5d526 ]---
I was unable to even use ctrl-alt-f1 to switch vt's.
However, ACPI triggers were working, and i could put the machine to
sleep and wake it again. after wake, though, the laptop's screen
still showed this spew and i couldn't change that with ctrl-alt-f1, or
any trackpad activity.
I did not have an external monitor handy to try out the VGA port.
Using ACPI triggers, i was able to cleanly shut the machine down, and
restart it. The graphics are fine after a restart.
I'm happy to try to provide more details if you let me know what info
would be useful.
--dkg
-- Package-specific info:
** Version:
Linux version 3.2.0-3-686-pae (Debian 3.2.23-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Mon Jul 23 03:50:34 UTC 2012
** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-3-686-pae root=/dev/mapper/vg_pip0-root ro verbose
** Not tainted
** Kernel log:
[17078.216093] PM: suspend of devices complete after 347.687 msecs
[17078.216407] ehci_hcd 0000:00:1d.7: PME# enabled
[17078.216427] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
[17078.232098] uhci_hcd 0000:00:1d.3: wake-up capability enabled by ACPI
[17078.232134] uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
[17078.232169] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
[17078.232204] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[17078.232272] PM: late suspend of devices complete after 16.171 msecs
[17078.232393] ACPI: Preparing to enter system sleep state S3
[17078.256648] PM: Saving platform NVS memory
[17078.257265] Disabling non-boot CPUs ...
[17078.257265] ACPI: Low-level resume complete
[17078.257265] PM: Restoring platform NVS memory
[17078.257265] Force enabled HPET at resume
[17078.257265] ACPI: Waking up from system sleep state S3
[17078.300990] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[17078.301030] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x7fe17fd1)
[17078.301039] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0x7fc07fb0)
[17078.301049] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x3030)
[17078.301064] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100507)
[17078.301120] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0x7fa17f91)
[17078.301130] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0xf0, writing 0x2020)
[17078.301145] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100106, writing 0x100507)
[17078.301200] pcieport 0000:00:1c.2: restoring config space at offset 0x7 (was 0xf0, writing 0x1010)
[17078.301215] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100106, writing 0x100507)
[17078.301271] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[17078.301293] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[17078.301322] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[17078.301339] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
[17078.301368] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[17078.301385] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
[17078.301414] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[17078.301431] uhci_hcd 0000:00:1d.3: wake-up capability disabled by ACPI
[17078.301469] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[17078.301493] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
[17078.301502] ehci_hcd 0000:00:1d.7: PME# disabled
[17078.301517] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x60000, writing 0x600ff)
[17078.301680] pci 0000:03:00.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[17078.301829] PM: early resume of devices complete after 0.974 msecs
[17078.302042] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[17078.302051] i915 0000:00:02.0: setting latency timer to 64
[17078.333616] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[17078.333628] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[17078.333688] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[17078.333758] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[17078.333768] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[17078.333795] usb usb2: root hub lost power or was reset
[17078.333814] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[17078.333824] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[17078.333849] usb usb3: root hub lost power or was reset
[17078.333866] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[17078.333875] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[17078.333900] usb usb4: root hub lost power or was reset
[17078.333916] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[17078.333925] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[17078.333950] usb usb5: root hub lost power or was reset
[17078.333969] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[17078.333978] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[17078.334018] pci 0000:00:1e.0: setting latency timer to 64
[17078.334039] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[17078.334047] ata_piix 0000:00:1f.2: setting latency timer to 64
[17078.338368] sd 0:0:0:0: [sda] Starting disk
[17078.576040] usb 1-5: reset high-speed USB device number 2 using ehci_hcd
[17078.820033] usb 1-8: reset high-speed USB device number 3 using ehci_hcd
[17080.740306] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[17080.740316] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[17080.756296] ata1.00: configured for UDMA/133
[17080.757008] PM: resume of devices complete after 2455.112 msecs
[17080.793718] PM: Finishing wakeup.
[17080.793722] Restarting tasks ... done.
[17080.846126] video LNXVIDEO:00: Restoring backlight state
[17081.181974] usb 2-2: new low-speed USB device number 2 using uhci_hcd
[17081.370085] usb 2-2: New USB device found, idVendor=046d, idProduct=c404
[17081.370097] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[17081.370104] usb 2-2: Product: Trackball
[17081.370109] usb 2-2: Manufacturer: Logitech
[17081.393711] input: Logitech Trackball as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input13
[17081.394327] generic-usb 0003:046D:C404.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:1d.0-2/input0
[17082.337293] Atheros(R) L2 Ethernet Driver - version 2.2.3
[17082.337302] Copyright (c) 2007 Atheros Corporation.
[17082.337369] atl2 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[17082.337391] atl2 0000:03:00.0: setting latency timer to 64
[17082.698294] atl2 0000:03:00.0: irq 44 for MSI/MSI-X
[17082.698927] ADDRCONF(NETDEV_UP): eth0: link is not ready
[17085.260488] atl2: eth0 NIC Link is Up<100 Mbps Full Duplex>
[17085.260861] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[21797.384218] hub 2-0:1.0: port 2 disabled by hub (EMI?), re-enabling...
[21797.384230] usb 2-2: USB disconnect, device number 2
[21797.636177] usb 2-2: new low-speed USB device number 3 using uhci_hcd
[21797.809616] usb 2-2: New USB device found, idVendor=046d, idProduct=c404
[21797.809627] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[21797.809634] usb 2-2: Product: Trackball
[21797.809639] usb 2-2: Manufacturer: Logitech
[21797.833206] input: Logitech Trackball as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input14
[21797.834000] generic-usb 0003:046D:C404.0002: input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:1d.0-2/input0
[24135.284833] sd 2:0:0:0: [sdb] No Caching mode page present
[24135.284846] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[24135.287200] sd 2:0:0:0: [sdb] No Caching mode page present
[24135.287211] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[24135.289215] sdb: sdb1
** Model information
not available
** Loaded modules:
atl2
bnep
rfcomm
bluetooth
crc16
binfmt_misc
uinput
fuse
ath5k
ath
mac80211
cfg80211
loop
joydev
snd_hda_codec_realtek
snd_hda_intel
i915
snd_hda_codec
snd_hwdep
snd_pcm_oss
snd_mixer_oss
drm_kms_helper
snd_pcm
iTCO_wdt
uvcvideo
drm
snd_page_alloc
psmouse
iTCO_vendor_support
snd_timer
videodev
snd
i2c_algo_bit
media
evdev
serio_raw
rng_core
soundcore
i2c_core
battery
ac
power_supply
video
eeepc_laptop
sparse_keymap
rfkill
processor
button
ext3
mbcache
jbd
btrfs
crc32c
libcrc32c
zlib_deflate
usbhid
hid
ohci_hcd
sha256_generic
cryptd
aes_i586
aes_generic
cbc
dm_crypt
usb_storage
uas
dm_mod
raid1
md_mod
sg
sd_mod
crc_t10dif
ata_generic
ata_piix
ahci
libahci
libata
scsi_mod
thermal
thermal_sys
uhci_hcd
ehci_hcd
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 04) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7f00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at ec00 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f7ec0000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f7f80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [8086:2668] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:8337]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f7eb8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 7fb00000-7fcfffff
Prefetchable memory behind bridge: 000000007fd00000-000000007fefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fbf00000-fbffffff
Prefetchable memory behind bridge: 000000007f900000-000000007fafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 [8086:2664] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: f8000000-fbefffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 04) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at e400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 04) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at e480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 04) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 04) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at e880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7eb7c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d4) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA Controller [8086:2653] (rev 04) (prog-if 80 [Master])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 0
Region 4: I/O ports at 0400 [size=32]
03:00.0 Ethernet controller [0200]: Atheros Communications Inc. L2 Fast Ethernet [1969:2048] (rev a0)
Subsystem: ASUSTeK Computer Inc. Device [1043:8233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at fbfa0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: atl2
** USB devices:
Bus 002 Device 003: ID 046d:c404 Logitech, Inc. TrackMan Wheel
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0951:1606 Kingston Technology Eee PC 701 SD Card Reader [ENE UB6225]
Bus 001 Device 003: ID 04f2:b071 Chicony Electronics Co., Ltd 2.0M UVC Webcam / CNF7129
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing'), (200, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-3-686-pae (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-3.2.0-3-686-pae depends on:
ii debconf [debconf-2.0] 1.5.46
ii initramfs-tools [linux-initramfs-tool] 0.107
ii kmod 9-1
ii linux-base 3.5
ii module-init-tools 9-1
Versions of packages linux-image-3.2.0-3-686-pae recommends:
ii firmware-linux-free 3.1
ii libc6-i686 2.13-35
Versions of packages linux-image-3.2.0-3-686-pae suggests:
ii debian-kernel-handbook 1.0.15
ii grub-pc 1.99-22.1
ii linux-doc-3.2 3.2.23-1
Versions of packages linux-image-3.2.0-3-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.36
pn xen-hypervisor <none>
-- debconf information excluded
Reply to: