Bug#543308: linux-image-2.6.30-1-amd64: Normal boot with default options
Package: linux-image-2.6.30-1-amd64
Severity: normal
Attached is the system info when booting without any troubleshooting options.
-- Package-specific info:
** Version:
Linux version 2.6.30-1-amd64 (Debian 2.6.30-6) (waldi@debian.org) (gcc version 4.3.4 (Debian 4.3.4-1) ) #1 SMP Sat Aug 15 18:09:19 UTC 2009
** Command line:
root=/dev/sda2 ro
** Not tainted
** Kernel log:
[ 3.659981] ACPI: PCI Interrupt Link [LSB0] enabled at IRQ 20
[ 3.660027] alloc irq_desc for 20 on cpu 0 node 0
[ 3.660029] alloc kstat_irqs on cpu 0 node 0
[ 3.660035] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LSB0] -> GSI 20 (level, high) -> IRQ 20
[ 3.660090] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 3.660093] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 3.660232] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 3.660298] ohci_hcd 0000:00:02.0: irq 20, io mem 0xfa100000
[ 3.714023] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.714059] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.714103] usb usb2: Product: OHCI Host Controller
[ 3.714136] usb usb2: Manufacturer: Linux 2.6.30-1-amd64 ohci_hcd
[ 3.714170] usb usb2: SerialNumber: 0000:00:02.0
[ 3.714261] usb usb2: configuration #1 chosen from 1 choice
[ 3.714335] hub 2-0:1.0: USB hub found
[ 3.714377] hub 2-0:1.0: 10 ports detected
[ 3.715077] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23
[ 3.715114] sata_nv 0000:00:08.0: PCI INT A -> Link[LSA1] -> GSI 23 (level, high) -> IRQ 23
[ 3.715201] sata_nv 0000:00:08.0: setting latency timer to 64
[ 3.715267] scsi2 : sata_nv
[ 3.715443] scsi3 : sata_nv
[ 3.715521] ata3: SATA max UDMA/133 cmd 0x28e0 ctl 0x2c00 bmdma 0x28c0 irq 23
[ 3.715559] ata4: SATA max UDMA/133 cmd 0x28e8 ctl 0x2c04 bmdma 0x28c8 irq 23
[ 3.936033] floppy0: no floppy controllers found
[ 4.540031] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.549215] ata1.00: ATA-6: WDC WD740GD-50FLC0, 33.08F33, max UDMA/133
[ 4.549257] ata1.00: 145226112 sectors, multi 16: LBA48
[ 4.565213] ata1.00: configured for UDMA/133
[ 4.565388] scsi 0:0:0:0: Direct-Access ATA WDC WD740GD-50FL 33.0 PQ: 0 ANSI: 5
[ 4.565678] sd 0:0:0:0: [sda] 145226112 512-byte hardware sectors: (74.3 GB/69.2 GiB)
[ 4.565739] sd 0:0:0:0: [sda] Write Protect is off
[ 4.565784] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.565806] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.565949] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 4.593253] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.600525] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.620611] ata3.00: ATA-6: WD My Book 1105, 1010, max UDMA/133
[ 4.620648] ata3.00: 976756784 sectors, multi 0: LBA48
[ 4.652627] ata3.00: configured for UDMA/133
[ 5.288027] ata2: SATA link down (SStatus 0 SControl 300)
[ 5.288208] scsi 2:0:0:0: Direct-Access ATA WD My Book 1010 PQ: 0 ANSI: 5
[ 5.288411] sd 2:0:0:0: [sdb] 976756784 512-byte hardware sectors: (500 GB/465 GiB)
[ 5.288469] sd 2:0:0:0: [sdb] Write Protect is off
[ 5.288522] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.288546] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.288676] sdb: sdb1
[ 5.289734] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 6.012024] ata4: SATA link down (SStatus 0 SControl 300)
[ 6.020610] ide-cd driver 5.00
[ 6.021192] ide-cd: hda: ATAPI 48X DVD-ROM CD-R/RW drive, 1536kB Cache
[ 6.021329] Uniform CD-ROM driver Revision: 3.20
[ 6.034343] ide-cd: hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[ 7.085528] floppy0: no floppy controllers found
[ 7.266188] PM: Starting manual resume from disk
[ 7.274212] REISERFS (device sda2): found reiserfs format "3.6" with standard journal
[ 7.274272] REISERFS (device sda2): using ordered data mode
[ 7.284209] REISERFS (device sda2): journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 7.285775] REISERFS (device sda2): checking transaction log (sda2)
[ 7.304403] REISERFS (device sda2): Using r5 hash to sort names
[ 8.720281] udev: starting version 141
[ 9.126257] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 9.126314] ACPI: Power Button [PWRF]
[ 9.126466] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 9.126521] ACPI: Power Button [PBTN]
[ 9.133748] processor ACPI_CPU:00: registered as cooling_device0
[ 9.133841] processor ACPI_CPU:01: registered as cooling_device1
[ 9.133926] processor ACPI_CPU:02: registered as cooling_device2
[ 9.134009] processor ACPI_CPU:03: registered as cooling_device3
[ 9.360083] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 9.483000] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2800
[ 9.483064] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2840
[ 9.775039] ACPI: PCI Interrupt Link [LACI] enabled at IRQ 22
[ 9.775082] Intel ICH 0000:00:04.0: PCI INT A -> Link[LACI] -> GSI 22 (level, high) -> IRQ 22
[ 9.775164] Intel ICH 0000:00:04.0: setting latency timer to 64
[ 9.913427] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 12.336031] floppy0: no floppy controllers found
[ 12.837253] Adding 2345448k swap on /dev/sda5. Priority:-1 extents:1 across:2345448k
[ 13.120163] loop: module loaded
[ 13.386051] fuse init (API version 7.11)
[ 13.509852] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 13.511352] SGI XFS Quota Management subsystem
[ 13.942952] XFS mounting filesystem sdb1
[ 14.181989] Ending clean XFS mount for filesystem: sdb1
[ 15.715035] RPC: Registered udp transport module.
[ 15.715083] RPC: Registered tcp transport module.
[ 15.767784] Slow work thread pool: Starting up
[ 15.768530] Slow work thread pool: Ready
[ 15.768635] FS-Cache: Loaded
[ 15.803765] FS-Cache: Netfs 'nfs' registered for caching
[ 15.819503] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 15.986231] svc: failed to register lockdv1 RPC service (errno 97).
[ 16.670561] powernow-k8: Found 1 Dual Core AMD Opteron(tm) Processor 270 processors (4 cpu cores) (version 2.20.00)
[ 16.670595] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[ 16.670597] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[ 19.074195] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 19.074278] NFSD: starting 90-second grace period
[ 20.590091] lp: driver loaded but no devices found
[ 20.595099] ppdev: user-space parallel port driver
[ 25.496018] eth1: no IPv6 routers present
[ 50.592896] reportbug[3399] trap divide error ip:7f18e9ec618c sp:7f18e3a39ac0 error:0 in libgtk-x11-2.0.so.0.1600.5[7f18e9da0000+3e9000]
** Loaded modules:
Module Size Used by
ppdev 7784 0
lp 10612 0
parport 38224 2 ppdev,lp
battery 7840 0
cpufreq_powersave 1792 0
cpufreq_stats 4660 0
cpufreq_userspace 3652 0
cpufreq_conservative 7928 0
nfsd 269328 9
nfs 258448 2
lockd 68212 2 nfsd,nfs
fscache 41704 1 nfs
nfs_acl 3264 2 nfsd,nfs
auth_rpcgss 40928 2 nfsd,nfs
sunrpc 196968 16 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
xfs 457200 1
exportfs 4672 2 nfsd,xfs
fuse 54784 1
dm_snapshot 22748 0
firewire_sbp2 15424 0
loop 15980 0
snd_intel8x0 32824 0
snd_ac97_codec 113960 1 snd_intel8x0
ac97_bus 2080 1 snd_ac97_codec
snd_pcm_oss 37200 0
snd_mixer_oss 15072 1 snd_pcm_oss
snd_pcm 78504 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_midi 6976 0
snd_rawmidi 23008 1 snd_seq_midi
snd_seq_midi_event 7712 1 snd_seq_midi
serio_raw 5844 0
snd_seq 51392 2 snd_seq_midi,snd_seq_midi_event
snd_timer 21824 2 snd_pcm,snd_seq
snd_seq_device 7476 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 63912 9 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
k8temp 5152 0
i2c_nforce2 7864 0
i2c_core 25456 1 i2c_nforce2
evdev 10448 6
pcspkr 2800 0
soundcore 7984 1 snd
snd_page_alloc 10000 2 snd_intel8x0,snd_pcm
psmouse 42172 0
processor 40160 0
button 6512 0
reiserfs 209032 1
ide_cd_mod 29048 0
cdrom 34344 1 ide_cd_mod
ata_generic 5924 0
ide_pci_generic 4964 0
ohci_hcd 22812 0
sata_nv 24952 3
firewire_ohci 22356 0
firewire_core 44996 2 firewire_sbp2,firewire_ohci
crc_itu_t 2720 1 firewire_core
amd74xx 6872 0
libata 175500 2 ata_generic,sata_nv
forcedeth 52668 0
ide_core 105120 3 ide_cd_mod,ide_pci_generic,amd74xx
ehci_hcd 33820 0
thermal 15936 0
fan 5240 0
thermal_sys 16448 3 processor,thermal,fan
dm_mirror 14648 0
dm_region_hash 12736 1 dm_mirror
dm_log 9924 2 dm_mirror,dm_region_hash
dm_mod 59384 3 dm_snapshot,dm_mirror,dm_log
sd_mod 33720 5
crc_t10dif 2096 1 sd_mod
mptscsih 25296 0
mptbase 61188 1 mptscsih
scsi_mod 158784 4 firewire_sbp2,libata,sd_mod,mptscsih
** PCI devices:
00:00.0 Memory controller [0580]: nVidia Corporation CK804 Memory Controller [10de:005e] (rev a3)
Subsystem: Hewlett-Packard Company Device [103c:1500]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 ISA bridge [0601]: nVidia Corporation CK804 ISA Bridge [10de:0051] (rev a3)
Subsystem: Hewlett-Packard Company Device [103c:1500]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: I/O ports at fb00 [size=256]
00:01.1 SMBus [0c05]: nVidia Corporation CK804 SMBus [10de:0052] (rev a2)
Subsystem: Hewlett-Packard Company Device [103c:1500]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 2880 [size=32]
Region 4: I/O ports at 2800 [size=64]
Region 5: I/O ports at 2840 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
00:02.0 USB Controller [0c03]: nVidia Corporation CK804 USB Controller [10de:005a] (rev a2) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:1500]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fa100000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:02.1 USB Controller [0c03]: nVidia Corporation CK804 USB Controller [10de:005b] (rev a3) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:1500]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 23
Region 0: Memory at febf0000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:04.0 Multimedia audio controller [0401]: nVidia Corporation CK804 AC'97 Audio Controller [10de:0059] (rev a2)
Subsystem: Hewlett-Packard Company Device [103c:1500]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 2000 [size=256]
Region 1: I/O ports at 2400 [size=256]
Region 2: Memory at fa101000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
00:06.0 IDE interface [0101]: nVidia Corporation CK804 IDE [10de:0053] (rev f2) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Device [103c:1500]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at 28a0 [size=16]
Capabilities: <access denied>
Kernel driver in use: AMD_IDE
00:07.0 IDE interface [0101]: nVidia Corporation CK804 Serial ATA Controller [10de:0054] (rev f3) (prog-if 85 [Master SecO PriO])
Subsystem: Hewlett-Packard Company Device [103c:1500]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at 28d0 [size=8]
Region 1: I/O ports at 28f8 [size=4]
Region 2: I/O ports at 28d8 [size=8]
Region 3: I/O ports at 28fc [size=4]
Region 4: I/O ports at 28b0 [size=16]
Region 5: Memory at fa102000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
00:08.0 IDE interface [0101]: nVidia Corporation CK804 Serial ATA Controller [10de:0055] (rev f3) (prog-if 85 [Master SecO PriO])
Subsystem: Hewlett-Packard Company Device [103c:1500]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at 28e0 [size=8]
Region 1: I/O ports at 2c00 [size=4]
Region 2: I/O ports at 28e8 [size=8]
Region 3: I/O ports at 2c04 [size=4]
Region 4: I/O ports at 28c0 [size=16]
Region 5: Memory at fa103000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
00:09.0 PCI bridge [0604]: nVidia Corporation CK804 PCI Bridge [10de:005c] (rev a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=64
Memory behind bridge: fa000000-fa0fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
00:0a.0 Bridge [0680]: nVidia Corporation CK804 Ethernet Controller [10de:0057] (rev a3)
Subsystem: Hewlett-Packard Company Device [103c:1500]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fa104000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 28f0 [size=8]
Capabilities: <access denied>
Kernel driver in use: forcedeth
00:0e.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
Memory behind bridge: f8000000-f9ffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: k8temp
00:19.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:19.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:19.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:19.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: k8temp
05:05.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:1500]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fa004000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at fa000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
0a:00.0 VGA compatible controller [0300]: nVidia Corporation NV41GL [Quadro FX 1400] [10de:00ce] (rev a2) (prog-if 00 [VGA controller])
Subsystem: nVidia Corporation Device [10de:0243]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at f0000000 (64-bit, prefetchable) [size=128M]
Region 3: Memory at f9000000 (64-bit, non-prefetchable) [size=16M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.30-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.30-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.27 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs
ii module-init-tools 3.10-3 tools for managing Linux kernel mo
linux-image-2.6.30-1-amd64 recommends no packages.
Versions of packages linux-image-2.6.30-1-amd64 suggests:
ii grub 0.97-56 GRand Unified Bootloader (dummy pa
ii grub-legacy [grub] 0.97-56 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.30 <none> (no description available)
-- debconf information:
linux-image-2.6.30-1-amd64/preinst/initrd-2.6.30-1-amd64:
linux-image-2.6.30-1-amd64/postinst/create-kimage-link-2.6.30-1-amd64: true
linux-image-2.6.30-1-amd64/preinst/abort-overwrite-2.6.30-1-amd64:
linux-image-2.6.30-1-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.30-1-amd64/preinst/lilo-initrd-2.6.30-1-amd64: true
linux-image-2.6.30-1-amd64/prerm/removing-running-kernel-2.6.30-1-amd64: true
linux-image-2.6.30-1-amd64/preinst/elilo-initrd-2.6.30-1-amd64: true
linux-image-2.6.30-1-amd64/postinst/depmod-error-2.6.30-1-amd64: false
linux-image-2.6.30-1-amd64/preinst/failed-to-move-modules-2.6.30-1-amd64:
linux-image-2.6.30-1-amd64/postinst/old-system-map-link-2.6.30-1-amd64: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.30-1-amd64/postinst/bootloader-error-2.6.30-1-amd64:
linux-image-2.6.30-1-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.30-1-amd64/postinst/old-dir-initrd-link-2.6.30-1-amd64: true
linux-image-2.6.30-1-amd64/postinst/old-initrd-link-2.6.30-1-amd64: true
linux-image-2.6.30-1-amd64/prerm/would-invalidate-boot-loader-2.6.30-1-amd64: true
linux-image-2.6.30-1-amd64/preinst/bootloader-initrd-2.6.30-1-amd64: true
linux-image-2.6.30-1-amd64/preinst/overwriting-modules-2.6.30-1-amd64: true
linux-image-2.6.30-1-amd64/postinst/depmod-error-initrd-2.6.30-1-amd64: false
linux-image-2.6.30-1-amd64/preinst/abort-install-2.6.30-1-amd64:
linux-image-2.6.30-1-amd64/postinst/bootloader-test-error-2.6.30-1-amd64:
Reply to: