Bug#536340: confirmed on 2.6.30-6
Package: linux-image-2.6.30-1-amd64
Version: 2.6.30-6
Severity: normal
-- Package-specific info:
** Version:
Linux version 2.6.30-1-amd64 (Debian 2.6.30-6) (waldi@debian.org) (gcc
version 4.3.4 (Debian 4.3.4-1) ) #1 SMP Sat Aug 15 18:09:19 UTC
2009
** Command line:
root=/dev/sda1 ro quiet
** Not tainted
** Kernel log:
[ 2.254184] hub 5-0:1.0: USB hub found
[ 2.254192] hub 5-0:1.0: 2 ports detected
[ 2.416217] ata1.00: ATA-7: WDC WD2500JS-58NCB1, 10.02E02, max UDMA/133
[ 2.416221] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.424232] ata1.00: configured for UDMA/133
[ 2.424368] scsi 0:0:0:0: Direct-Access ATA WDC WD2500JS-58N
10.0 PQ: 0 ANSI: 5
[ 2.560048] usb 2-1: new low speed USB device using uhci_hcd and
address 2
[ 2.597940] ide-cd driver
5.00
[ 2.600181] ide-cd: hda: ATAPI 48X DVD-ROM DVD-R/RAM CD-R/RW drive,
2048kB Cache
[ 2.600189] Uniform CD-ROM driver Revision:
3.20
[ 2.605570] Driver 'sd' needs updating - please use bus_type
methods
[ 2.605691] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors:
(250 GB/232 GiB)
[ 2.605707] sd 0:0:0:0: [sda] Write Protect is
off
[ 2.605710] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00
00
[ 2.605732] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.605827] sda: sda1
sda3
[ 2.613414] sd 0:0:0:0: [sda] Attached SCSI
disk
[ 2.615010] ide-cd: hdb: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB
Cache
[ 2.737259] usb 2-1: New USB device found, idVendor=046d,
idProduct=c505
[ 2.737263] usb 2-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.737266] usb 2-1: Product: USB
Receiver
[ 2.737268] usb 2-1: Manufacturer:
Logitech
[ 2.737355] usb 2-1: configuration #1 chosen from 1
choice
[ 2.747107] usbcore: registered new interface driver
hiddev
[ 2.760550] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input1
[ 2.760609] generic-usb 0003:046D:C505.0001: input,hidraw0: USB HID
v1.10 Keyboard [Logitech USB Receiver] on
usb-0000:00:1d.0-1/input0
[ 2.792785] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input2
[ 2.792837] generic-usb 0003:046D:C505.0002: input,hidraw1: USB HID
v1.10 Mouse [Logitech USB Receiver] on
usb-0000:00:1d.0-1/input1
[ 2.792852] usbcore: registered new interface driver
usbhid
[ 2.792855] usbhid: v2.6:USB HID core
driver
[ 3.063395] kjournald starting. Commit interval 5
seconds
[ 3.063410] EXT3-fs: mounted filesystem with ordered data
mode.
[ 4.103955] udev: starting version
141
[ 4.380283] processor ACPI_CPU:00: registered as
cooling_device0
[ 4.380288] ACPI: Processor [CPU0] (supports 8 throttling
states)
[ 4.380424] processor ACPI_CPU:01: registered as
cooling_device1
[ 4.380430] ACPI: Processor [CPU1] (supports 8 throttling
states)
[ 4.383750] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.383759] ACPI: Power Button
[PWRF]
[ 4.383825] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 4.383833] ACPI: Sleep Button
[SLPB]
[ 4.450412] parport_pc 00:08: reported by Plug and Play
ACPI
[ 4.450495] parport0: PC-style at 0x378 (0x778), irq 7
[PCSPP,TRISTATE]
[ 4.456484] input: PC Speaker as
/devices/platform/pcspkr/input/input5
[ 4.818884] intel_rng: Firmware space is locked read-only. If you
can't or
[ 4.818886] intel_rng: don't want to disable this in firmware setup,
and if
[ 4.818887] intel_rng: you are certain that your system has a
functional
[ 4.818888] intel_rng: RNG, try using the 'no_fwh_detect'
option.
[ 4.818909] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 5.204372] Error: Driver 'pcspkr' is already registered,
aborting...
[ 5.371636] alloc irq_desc for 22 on cpu 0 node
0
[ 5.371640] alloc kstat_irqs on cpu 0 node
0
[ 5.371649] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low)
-> IRQ 22
[ 5.371688] HDA Intel 0000:00:1b.0: setting latency timer to
64
[ 5.471818] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input6
[ 5.672152] input: HDA Intel Line In at Ext Rear Jack as
/devices/pci0000:00/0000:00:1b.0/input/input7
[ 5.672230] input: HDA Intel Mic at Ext Front Jack as
/devices/pci0000:00/0000:00:1b.0/input/input8
[ 5.672307] input: HDA Intel Mic at Ext Rear Jack as
/devices/pci0000:00/0000:00:1b.0/input/input9
[ 5.672372] input: HDA Intel Line Out at Ext Rear Jack as
/devices/pci0000:00/0000:00:1b.0/input/input10
[ 5.672434] input: HDA Intel Line Out at Ext Rear Jack as
/devices/pci0000:00/0000:00:1b.0/input/input11
[ 5.672495] input: HDA Intel Line Out at Ext Rear Jack as
/devices/pci0000:00/0000:00:1b.0/input/input12
[ 5.672555] input: HDA Intel Line Out at Ext Rear Jack as
/devices/pci0000:00/0000:00:1b.0/input/input13
[ 5.672617] input: HDA Intel HP Out at Ext Front Jack as
/devices/pci0000:00/0000:00:1b.0/input/input14
[ 7.340372] EXT3 FS on sda1, internal
journal
[ 8.072506] loop: module
loaded
[ 8.103516] coretemp coretemp.0: Using relative temperature
scale!
[ 8.103568] coretemp coretemp.1: Using relative temperature
scale!
[ 8.751864] kjournald starting. Commit interval 5
seconds
[ 8.752088] EXT3 FS on sda3, internal
journal
[ 8.752094] EXT3-fs: mounted filesystem with ordered data
mode.
[ 10.289814] ADDRCONF(NETDEV_UP): eth0: link is not
ready
[ 12.816137] e100: eth0 NIC Link is Up 100 Mbps Full
Duplex
[ 12.816384] ADDRCONF(NETDEV_CHANGE): eth0: link becomes
ready
[ 13.970399] vboxdrv: Trying to deactivate the NMI watchdog
permanently...
[ 13.970403] vboxdrv: Successfully
done.
[ 13.970405] vboxdrv: Found 2 processor
cores.
[ 13.970466] VBoxDrv: dbg -
g_abExecMemory=ffffffffa02a97e0
[ 13.970490] vboxdrv: fAsync=0 offMin=0x2b5
offMax=0x158c
[ 13.970534] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 13.970536] vboxdrv: Successfully loaded version 2.1.4_OSE (interface
0x000a0009).
[ 14.185860] VBoxNetFlt: dbg -
g_abExecMemory=ffffffffa0446800
[ 15.401662] lp0: using parport0
(interrupt-driven).
[ 15.424922] ppdev: user-space parallel port
driver
[ 17.880104] [drm] Initialized drm 1.1.0
20060810
[ 17.890057] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 17.890063] pci 0000:00:02.0: setting latency timer to
64
[ 17.902354] alloc irq_desc for 27 on cpu 0 node
0
[ 17.902357] alloc kstat_irqs on cpu 0 node
0
[ 17.902369] pci 0000:00:02.0: irq 27 for
MSI/MSI-X
[ 17.902436] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
minor 0
[ 23.556011] eth0: no IPv6 routers
present
[ 31.754292] CPU0 attaching NULL
sched-domain.
[ 31.754297] CPU1 attaching NULL
sched-domain.
[ 31.768105] CPU0 attaching
sched-domain:
[ 31.768109] domain 0: span 0-1 level
MC
[ 31.768112] groups: 0
1
[ 31.768118] CPU1 attaching
sched-domain:
[ 31.768120] domain 0: span 0-1 level
MC
[ 31.768123] groups: 1
0
[ 65.191088] warning: `VirtualBox' uses 32-bit capabilities (legacy
support in use)
** Loaded modules:
Module Size Used by
i915 166856 2
drm 172688 3 i915
i2c_algo_bit 5988 1 i915
video 21884 1 i915
output 3472 1 video
ppdev 7784 0
lp 10612 0
vboxnetflt 85068 0
vboxdrv 1679420 2 vboxnetflt
coretemp 6656 0
loop 15980 0
snd_hda_codec_idt 62480 1
snd_hda_intel 26680 7
snd_hda_codec 75248 2 snd_hda_codec_idt,snd_hda_intel
snd_hwdep 8152 1 snd_hda_codec
snd_pcm_oss 37200 0
snd_mixer_oss 15072 1 snd_pcm_oss
snd_pcm 78504 5 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_timer 21824 3 snd_pcm
snd 63912 18
snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
i2c_i801 10464
0
soundcore 7984 1
snd
rng_core 4872
0
snd_page_alloc 10000 2
snd_hda_intel,snd_pcm
i2c_core 25456 4
i915,drm,i2c_algo_bit,i2c_i801
evdev 10448
10
psmouse 42172
0
pcspkr 2800
0
parport_pc 27080
1
serio_raw 5844
0
parport 38224 3
ppdev,lp,parport_pc
button 6512
0
processor 40160
0
ext3 122864
2
jbd 48168 1
ext3
mbcache 8804 1
ext3
usbhid 37328
0
hid 41376 1
usbhid
sd_mod 33720
3
crc_t10dif 2096 1
sd_mod
ide_cd_mod 29048
0
cdrom 34344 1
ide_cd_mod
ide_pci_generic 4964
0
ata_generic 5924
0
ata_piix 25124
2
uhci_hcd 22208
0
libata 175500 2
ata_generic,ata_piix
scsi_mod 158784 2
sd_mod,libata
piix 7256
0
ide_core 105120 3
ide_cd_mod,ide_pci_generic,piix
e100 32488
0
mii 5600 1
e100
ehci_hcd 33820
0
intel_agp 28752
1
thermal 15936
0
fan 5240
0
thermal_sys 16448 4
video,processor,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82946GZ/PL/GL Memory
Controller Hub [8086:2970] (rev 02)
Subsystem: Intel Corporation Device
[8086:5354]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-
SERR-
Kernel driver in use:
agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 82946GZ/GL
Integrated Graphics Controller [8086:2972] (rev 02) (prog-if 00 [VGA
controller])
Subsystem: Intel Corporation Device
[8086:5354]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-
SERR-
[disabled]
Capabilities:
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller [8086:27d8] (rev
01)
Subsystem: Intel Corporation Device
[8086:a201]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-
SERR-
Kernel driver in use: HDA
Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-
SERR- TAbort-
Reset-
FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat-
DiscTmrSERREn-
Capabilities:
Kernel driver in use:
pcieport-driver
00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 3 [8086:27d4] (rev 01) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-
SERR- TAbort-
Reset-
FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat-
DiscTmrSERREn-
Capabilities:
Kernel driver in use:
pcieport-driver
00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 4 [8086:27d6] (rev 01) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-
SERR- TAbort-
Reset-
FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat-
DiscTmrSERREn-
Capabilities:
Kernel driver in use:
pcieport-driver
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00
[UHCI])
Subsystem: Intel Corporation Device
[8086:5354]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort-
SERR- TAbort-
SERR- TAbort-
SERR- TAbort-
SERR- TAbort-
SERR-
Kernel driver in use:
ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev e1) (prog-if 01 [Subtractive
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-
SERR- TAbort-
Reset-
FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat-
DiscTmrSERREn-
Capabilities:
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family)
LPC Interface Bridge [8086:27b8] (rev 01)
Subsystem: Intel Corporation Device
[8086:5354]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium>TAbort-
SERR-
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE
Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP
PriP])
Subsystem: Intel Corporation Device
[8086:5354]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort-
SERR- TAbort-
SERR-
Kernel driver in use:
ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus
Controller [8086:27da] (rev 01)
Subsystem: Intel Corporation Device
[8086:5354]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort-
SERR- TAbort-
SERR-
Kernel driver in use:
e100
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.30-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.30-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.27 Debian configuration
management sy
ii initramfs-tools [linux-initra 0.93.4 tools for generating an
initramfs
ii module-init-tools 3.9-2 tools for managing Linux
kernel mo
linux-image-2.6.30-1-amd64 recommends no packages.
Versions of packages linux-image-2.6.30-1-amd64 suggests:
ii grub 0.97-56 GRand Unified Bootloader
(dummy pa
ii grub-legacy [grub] 0.97-56 GRand Unified Bootloader
(Legacy v
pn linux-doc-2.6.30 (no description
available)
-- debconf information:
linux-image-2.6.30-1-amd64/preinst/initrd-2.6.30-1-amd64:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.30-1-amd64/postinst/create-kimage-link-2.6.30-1-amd64:
true
linux-image-2.6.30-1-amd64/preinst/abort-overwrite-2.6.30-1-amd64:
linux-image-2.6.30-1-amd64/postinst/bootloader-error-2.6.30-1-amd64:
linux-image-2.6.30-1-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.30-1-amd64/postinst/old-dir-initrd-link-2.6.30-1-amd64: true
linux-image-2.6.30-1-amd64/postinst/old-initrd-link-2.6.30-1-amd64: true
linux-image-2.6.30-1-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.30-1-amd64/preinst/lilo-initrd-2.6.30-1-amd64: true
linux-image-2.6.30-1-amd64/prerm/removing-running-kernel-2.6.30-1-amd64:
true
linux-image-2.6.30-1-amd64/prerm/would-invalidate-boot-loader-2.6.30-1-amd64:
true
linux-image-2.6.30-1-amd64/preinst/elilo-initrd-2.6.30-1-amd64: true
linux-image-2.6.30-1-amd64/preinst/bootloader-initrd-2.6.30-1-amd64: true
linux-image-2.6.30-1-amd64/preinst/overwriting-modules-2.6.30-1-amd64:
true
linux-image-2.6.30-1-amd64/postinst/depmod-error-2.6.30-1-amd64: false
linux-image-2.6.30-1-amd64/preinst/failed-to-move-modules-2.6.30-1-amd64:
linux-image-2.6.30-1-amd64/postinst/depmod-error-initrd-2.6.30-1-amd64:
false
linux-image-2.6.30-1-amd64/preinst/abort-install-2.6.30-1-amd64:
linux-image-2.6.30-1-amd64/postinst/bootloader-test-error-2.6.30-1-amd64:
linux-image-2.6.30-1-amd64/postinst/old-system-map-link-2.6.30-1-amd64: true
Bug's confirmed also on my new testing installation with 2.6.30-6 kernel
version.
(even now, the front jack works with the 2.6.26 kernel)
_________________________________________________________________
Racconta la tua estate, crea il tuo blog.
http://www.windowslive.it/spaces.aspx
Reply to: