Your message dated Mon, 4 Feb 2008 14:24:05 -0500 with message-id <20080204192405.GA29910@kodama.kitenet.net> and subject line Bug#464018: Acknowledgement (/sys/class/power_supply/CMB1 reports nonsense values for charge_now, voltage_now) has caused the attached Bug report to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what I am talking about this indicates a serious mail system misconfiguration somewhere. Please contact me immediately.) Debian bug tracking system administrator (administrator, Debian Bugs database)
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: /sys/class/power_supply/CMB1 reports nonsense values for charge_now, voltage_now
- From: Joey Hess <joeyh@debian.org>
- Date: Mon, 4 Feb 2008 14:12:00 -0500
- Message-id: <[🔎] 20080204191200.GA28224@kodama.kitenet.net>
Package: linux-image-2.6.24-1-686 Version: 2.6.24-2 Severity: normal Ever since I resumed my laptop from sleep this morning, /sys/class/power_supply/CMB1 has had nonsensical values for *_now: root@kodama:/sys/class/power_supply/CMB1>cat charge_now 0 root@kodama:/sys/class/power_supply/CMB1>cat current_now 0 root@kodama:/sys/class/power_supply/CMB1>cat voltage_now 0 I tried removing and reloading the battery module, didn't help. I don't think my laptop is running on an empty battety, since it charged all night, and since the low battery LED is not on. I also doubt that it's using 0 volts. I never had this kind of trouble out of /proc/acpi, and /sys/class/power_supply/ had been working accurately for a couple of days before this happened. Rest of the info seems ok: root@kodama:/sys/class/power_supply/CMB1>cat charge_full 7800000 root@kodama:/sys/class/power_supply/CMB1>cat voltage_min_design 7200000 root@kodama:/sys/class/power_supply/CMB1>cat manufacturer Fujitsu root@kodama:/sys/class/power_supply/CMB1>cat model_name CP234020 root@kodama:/sys/class/power_supply/CMB1>cat present 1 root@kodama:/sys/class/power_supply/CMB1>cat status Discharging root@kodama:/sys/class/power_supply/CMB1>cat technology Li-ion root@kodama:/sys/class/power_supply/CMB1>cat type Battery -- Package-specific info: ** Version: Linux version 2.6.24-1-686 (Debian 2.6.24-2) (waldi@debian.org) (gcc version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 SMP Thu Jan 31 20:35:50 UTC 2008 ** Command line: root=/dev/mapper/kodama-root ro acpi_sleep=s3_bios splash ** Not tainted ** Kernel log: ACPI handle has no context! ACPI handle has no context! ACPI: PCI interrupt for device 0000:00:1f.2 disabled ACPI: PCI interrupt for device 0000:00:1d.7 disabled ACPI: PCI interrupt for device 0000:00:1d.3 disabled ACPI: PCI interrupt for device 0000:00:1d.2 disabled ACPI: PCI interrupt for device 0000:00:1d.1 disabled ACPI: PCI interrupt for device 0000:00:1d.0 disabled ACPI: PCI interrupt for device 0000:00:1b.0 disabled Disabling non-boot CPUs ... Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Back to C! Force enabled HPET at resume PM: Writing back config space on device 0000:00:02.0 at offset f (was 100, writing 10b) ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PM: Writing back config space on device 0000:00:02.1 at offset 4 (was 0, writing 30000000) PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 8) PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100002) ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1b.0 to 64 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.0 to 64 usb usb1: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.1 to 64 usb usb2: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.2 to 64 usb usb3: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.3 to 64 usb usb4: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.7 to 64 PM: Writing back config space on device 0000:00:1e.0 at offset f (was 40000, writing 400ff) PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 10001, writing 1fff1) PM: Writing back config space on device 0000:00:1e.0 at offset 8 (was 0, writing b010b010) PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was 22800000, writing 22802020) PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20070600, writing 200a0600) PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100004, writing 100107) PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1f.2 to 64 PM: Writing back config space on device 0000:06:03.0 at offset f (was 7000100, writing 580010b) PM: Writing back config space on device 0000:06:03.0 at offset e (was 0, writing 28fc) PM: Writing back config space on device 0000:06:03.0 at offset d (was 0, writing 2800) PM: Writing back config space on device 0000:06:03.0 at offset c (was 0, writing 24fc) PM: Writing back config space on device 0000:06:03.0 at offset b (was 0, writing 2400) PM: Writing back config space on device 0000:06:03.0 at offset a (was 0, writing 3bfff000) PM: Writing back config space on device 0000:06:03.0 at offset 9 (was 0, writing 38000000) PM: Writing back config space on device 0000:06:03.0 at offset 8 (was 0, writing 37fff000) PM: Writing back config space on device 0000:06:03.0 at offset 7 (was 0, writing 34000000) PM: Writing back config space on device 0000:06:03.0 at offset 6 (was 0, writing b00a0706) PM: Writing back config space on device 0000:06:03.0 at offset 4 (was 0, writing b0103000) PM: Writing back config space on device 0000:06:03.0 at offset 3 (was 820000, writing 82a800) PM: Writing back config space on device 0000:06:03.0 at offset 1 (was 2100000, writing 2100007) PM: Writing back config space on device 0000:06:03.1 at offset 4 (was 0, writing b0100000) PM: Writing back config space on device 0000:06:03.1 at offset 3 (was 800000, writing 802000) PM: Writing back config space on device 0000:06:03.1 at offset 1 (was 2100000, writing 2100106) PM: Writing back config space on device 0000:06:03.2 at offset 4 (was 0, writing b0100800) PM: Writing back config space on device 0000:06:03.2 at offset 3 (was 800000, writing 802000) PM: Writing back config space on device 0000:06:03.2 at offset 1 (was 2100000, writing 2100106) ACPI: PCI Interrupt 0000:06:03.2[A] -> GSI 16 (level, low) -> IRQ 16 PM: Writing back config space on device 0000:06:03.3 at offset 4 (was 0, writing b0100c00) PM: Writing back config space on device 0000:06:03.3 at offset 1 (was 2100000, writing 2100102) PM: Writing back config space on device 0000:06:03.4 at offset 4 (was 0, writing b0101000) PM: Writing back config space on device 0000:06:03.4 at offset 1 (was 2100000, writing 2100102) PM: Writing back config space on device 0000:06:04.0 at offset 5 (was 0, writing b0101400) PM: Writing back config space on device 0000:06:04.0 at offset 4 (was 1, writing 2001) PM: Writing back config space on device 0000:06:04.0 at offset 3 (was 0, writing 2000) PM: Writing back config space on device 0000:06:04.0 at offset 1 (was 2900000, writing 2900107) eth0: link down wlan0: Coming out of suspend... PCI: Enabling device 0000:06:05.0 (0000 -> 0002) ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 18 (level, low) -> IRQ 19 PM: Writing back config space on device 0000:06:05.0 at offset f (was 18030100, writing 1803010b) PM: Writing back config space on device 0000:06:05.0 at offset 4 (was 0, writing b0102000) PM: Writing back config space on device 0000:06:05.0 at offset 3 (was 0, writing 2008) PM: Writing back config space on device 0000:06:05.0 at offset 1 (was 2900002, writing 2900116) i8042 kbd 00:07: activation failed i8042 aux 00:08: activation failed ata2: SATA link down (SStatus 0 SControl 0) ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 0) hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected Restarting tasks ... <6>usb 3-1: USB disconnect, address 2 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) done. usb 4-2: USB disconnect, address 2 ata1.00: configured for UDMA/33 usb 3-1: new full speed USB device using uhci_hcd and address 3 usb 3-1: configuration #1 chosen from 1 choice usb 4-2: new full speed USB device using uhci_hcd and address 3 usb 4-2: configuration #1 chosen from 1 choice tun0: Disabled Privacy Extensions ACPI: Battery Slot [CMB1] (battery present) ACPI: Battery Slot [CMB2] (battery absent) ** Loaded modules: Module Size Used by battery 8640 0 i915 22048 2 drm 74036 3 i915 rfcomm 36784 2 l2cap 22880 9 rfcomm tun 10976 1 ppdev 8804 0 parport_pc 33668 0 lp 11076 0 parport 34280 3 ppdev,parport_pc,lp acpi_cpufreq 9260 0 cpufreq_stats 5184 0 cpufreq_conservative 7560 0 cpufreq_powersave 1856 0 cpufreq_ondemand 8492 1 cpufreq_userspace 4260 0 freq_table 4512 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand ipv6 240772 30 nfs 228168 6 lockd 60744 2 nfs nfs_acl 3520 1 nfs sunrpc 170780 24 nfs,lockd,nfs_acl joydev 11360 0 pcmcia 37036 0 ipw2200 134568 0 ieee80211 31048 1 ipw2200 ieee80211_crypt 5888 1 ieee80211 sdhci 16836 0 firmware_class 9408 2 pcmcia,ipw2200 mmc_core 47300 1 sdhci yenta_socket 24844 1 rsrc_nonstatic 11872 1 yenta_socket pcmcia_core 36884 3 pcmcia,yenta_socket,rsrc_nonstatic rtc 13052 0 serio_raw 6660 0 pcspkr 3200 0 psmouse 36464 0 i2c_i801 9232 0 iTCO_wdt 11268 0 i2c_core 22432 1 i2c_i801 hci_usb 14780 2 bluetooth 53220 7 rfcomm,l2cap,hci_usb snd_hda_intel 275264 2 video 18672 0 output 3744 1 video snd_pcm_oss 38272 0 snd_mixer_oss 15296 2 snd_pcm_oss snd_pcm 71780 2 snd_hda_intel,snd_pcm_oss snd_timer 21092 1 snd_pcm ac 4544 0 button 8432 0 snd 48612 7 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer intel_agp 23412 1 soundcore 7552 2 snd agpgart 31688 3 drm,intel_agp snd_page_alloc 10056 2 snd_hda_intel,snd_pcm evdev 11104 6 ext3 122920 2 jbd 43732 1 ext3 mbcache 8288 1 ext3 sha256_generic 11040 0 aes_i586 33376 2 aes_generic 27776 0 geode_aes 6024 0 cbc 4416 1 blkcipher 6724 2 geode_aes,cbc dm_crypt 13220 1 dm_mirror 21600 0 dm_snapshot 16964 0 dm_mod 55812 10 dm_crypt,dm_mirror,dm_snapshot sg 33264 0 sr_mod 16708 0 cdrom 32512 1 sr_mod ide_disk 15648 3 ata_piix 17092 0 8139cp 21856 0 ata_generic 7428 0 ahci 26116 0 libata 144464 3 ata_piix,ata_generic,ahci scsi_mod 141196 3 sg,sr_mod,libata 8139too 25600 0 mii 5312 2 8139cp,8139too firewire_ohci 17760 0 firewire_core 39232 1 firewire_ohci crc_itu_t 2176 1 firewire_core generic 4388 0 [permanent] piix 7492 0 [permanent] ide_core 108292 3 ide_disk,generic,piix ehci_hcd 32524 0 uhci_hcd 23376 0 usbcore 132940 4 hci_usb,ehci_hcd,uhci_hcd thermal 16028 0 processor 36520 3 acpi_cpufreq,thermal fan 4772 0 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 04) Subsystem: Fujitsu Limited. Unknown device [10cf:12d7] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 04) (prog-if 00 [VGA controller]) Subsystem: Fujitsu Limited. Unknown device [10cf:12e2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at b0080000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at 1400 [size=8] Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at b0040000 (32-bit, non-prefetchable) [size=256K] Capabilities: <access denied> Kernel modules: intelfb 00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 04) Subsystem: Fujitsu Limited. Unknown device [10cf:12e2] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: Memory at 30000000 (32-bit, non-prefetchable) [disabled] [size=512K] Capabilities: <access denied> 00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [8086:2668] (rev 04) Subsystem: Fujitsu Limited. Unknown device [10cf:1326] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at b0000000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 04) (prog-if 00 [UHCI]) Subsystem: Fujitsu Limited. Unknown device [10cf:12e8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 17 Region 4: I/O ports at 1420 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 04) (prog-if 00 [UHCI]) Subsystem: Fujitsu Limited. Unknown device [10cf:12e8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 18 Region 4: I/O ports at 1440 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 04) (prog-if 00 [UHCI]) Subsystem: Fujitsu Limited. Unknown device [10cf:12e8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 19 Region 4: I/O ports at 1460 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 04) (prog-if 00 [UHCI]) Subsystem: Fujitsu Limited. Unknown device [10cf:12e8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at 1480 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 04) (prog-if 20 [EHCI]) Subsystem: Fujitsu Limited. Unknown device [10cf:12e9] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 17 Region 0: Memory at b0004000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d4) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=06, subordinate=0a, sec-latency=32 I/O behind bridge: 00002000-00002fff Memory behind bridge: b0100000-b01fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 04) Subsystem: Fujitsu Limited. Unknown device [10cf:12e4] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel modules: iTCO_wdt, intel-rng 00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller [8086:266f] (rev 04) (prog-if 8a [Master SecP PriP]) Subsystem: Fujitsu Limited. Unknown device [10cf:12e5] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 1410 [size=16] Kernel driver in use: PIIX_IDE Kernel modules: piix 00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA Controller [8086:2653] (rev 04) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Fujitsu Limited. Unknown device [10cf:12e6] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 18 Region 0: I/O ports at 14b8 [size=8] Region 1: I/O ports at 140c [size=4] Region 2: I/O ports at 14b0 [size=8] Region 3: I/O ports at 1408 [size=4] Region 4: I/O ports at 14a0 [size=16] Region 5: Memory at b0004400 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci, ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 04) Subsystem: Fujitsu Limited. Unknown device [10cf:12e7] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 18 Region 4: I/O ports at 14c0 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 06:03.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b3) Subsystem: Fujitsu Limited. Unknown device [10cf:1254] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168 Interrupt: pin A routed to IRQ 16 Region 0: Memory at b0103000 (32-bit, non-prefetchable) [size=4K] Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176 Memory window 0: 34000000-37fff000 (prefetchable) Memory window 1: 38000000-3bfff000 I/O window 0: 00002400-000024ff I/O window 1: 00002800-000028ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket 06:03.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] (rev 08) (prog-if 10 [OHCI]) Subsystem: Fujitsu Limited. Unknown device [10cf:1255] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min, 1000ns max) Interrupt: pin B routed to IRQ 20 Region 0: Memory at b0100000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci 06:03.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 17) Subsystem: Fujitsu Limited. Unknown device [10cf:1323] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 16 Region 0: Memory at b0100800 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci Kernel modules: sdhci 06:03.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 08) Subsystem: Fujitsu Limited. Unknown device [10cf:1257] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 255 Region 0: Memory at b0100c00 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> 06:03.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 03) Subsystem: Fujitsu Limited. Unknown device [10cf:1324] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 255 Region 0: Memory at b0101000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> 06:04.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) Subsystem: Fujitsu Limited. Unknown device [10cf:12ce] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 21 Region 0: I/O ports at 2000 [size=256] Region 1: Memory at b0101400 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: 8139too Kernel modules: 8139too, 8139cp 06:05.0 Network controller [0280]: Intel Corporation PRO/Wireless 2915ABG Network Connection [8086:4223] (rev 05) Subsystem: Intel Corporation Unknown device [8086:1030] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (750ns min, 6000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at b0102000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ipw2200 Kernel modules: ipw2200 -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.24-1-686 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.24-1-686 depends on: ii debconf [debconf-2.0] 1.5.19 Debian configuration management sy ii initramfs-tools [linux-initr 0.91d tools for generating an initramfs ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo Versions of packages linux-image-2.6.24-1-686 recommends: ii libc6-i686 2.7-6 GNU C Library: Shared libraries [i -- debconf information excluded -- see shy joAttachment: signature.asc
Description: Digital signature
--- End Message ---
--- Begin Message ---
- To: 464018-done@bugs.debian.org
- Subject: Re: Bug#464018: Acknowledgement (/sys/class/power_supply/CMB1 reports nonsense values for charge_now, voltage_now)
- From: Joey Hess <joeyh@debian.org>
- Date: Mon, 4 Feb 2008 14:24:05 -0500
- Message-id: <20080204192405.GA29910@kodama.kitenet.net>
- In-reply-to: <handler.464018.B.120215232516020.ack@bugs.debian.org>
- References: <[🔎] 20080204191200.GA28224@kodama.kitenet.net> <handler.464018.B.120215232516020.ack@bugs.debian.org>
Closing this, it actually seems to be a hardware problem. -- see shy joAttachment: signature.asc
Description: Digital signature
--- End Message ---