Package: linux-image-2.6.24-1-686 Version: 2.6.24-2 Severity: normal Ever since I resumed my laptop from sleep this morning, /sys/class/power_supply/CMB1 has had nonsensical values for *_now: root@kodama:/sys/class/power_supply/CMB1>cat charge_now 0 root@kodama:/sys/class/power_supply/CMB1>cat current_now 0 root@kodama:/sys/class/power_supply/CMB1>cat voltage_now 0 I tried removing and reloading the battery module, didn't help. I don't think my laptop is running on an empty battety, since it charged all night, and since the low battery LED is not on. I also doubt that it's using 0 volts. I never had this kind of trouble out of /proc/acpi, and /sys/class/power_supply/ had been working accurately for a couple of days before this happened. Rest of the info seems ok: root@kodama:/sys/class/power_supply/CMB1>cat charge_full 7800000 root@kodama:/sys/class/power_supply/CMB1>cat voltage_min_design 7200000 root@kodama:/sys/class/power_supply/CMB1>cat manufacturer Fujitsu root@kodama:/sys/class/power_supply/CMB1>cat model_name CP234020 root@kodama:/sys/class/power_supply/CMB1>cat present 1 root@kodama:/sys/class/power_supply/CMB1>cat status Discharging root@kodama:/sys/class/power_supply/CMB1>cat technology Li-ion root@kodama:/sys/class/power_supply/CMB1>cat type Battery -- Package-specific info: ** Version: Linux version 2.6.24-1-686 (Debian 2.6.24-2) (waldi@debian.org) (gcc version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 SMP Thu Jan 31 20:35:50 UTC 2008 ** Command line: root=/dev/mapper/kodama-root ro acpi_sleep=s3_bios splash ** Not tainted ** Kernel log: ACPI handle has no context! ACPI handle has no context! ACPI: PCI interrupt for device 0000:00:1f.2 disabled ACPI: PCI interrupt for device 0000:00:1d.7 disabled ACPI: PCI interrupt for device 0000:00:1d.3 disabled ACPI: PCI interrupt for device 0000:00:1d.2 disabled ACPI: PCI interrupt for device 0000:00:1d.1 disabled ACPI: PCI interrupt for device 0000:00:1d.0 disabled ACPI: PCI interrupt for device 0000:00:1b.0 disabled Disabling non-boot CPUs ... Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Back to C! Force enabled HPET at resume PM: Writing back config space on device 0000:00:02.0 at offset f (was 100, writing 10b) ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PM: Writing back config space on device 0000:00:02.1 at offset 4 (was 0, writing 30000000) PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 8) PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100002) ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1b.0 to 64 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.0 to 64 usb usb1: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.1 to 64 usb usb2: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.2 to 64 usb usb3: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.3 to 64 usb usb4: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.7 to 64 PM: Writing back config space on device 0000:00:1e.0 at offset f (was 40000, writing 400ff) PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 10001, writing 1fff1) PM: Writing back config space on device 0000:00:1e.0 at offset 8 (was 0, writing b010b010) PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was 22800000, writing 22802020) PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20070600, writing 200a0600) PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100004, writing 100107) PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1f.2 to 64 PM: Writing back config space on device 0000:06:03.0 at offset f (was 7000100, writing 580010b) PM: Writing back config space on device 0000:06:03.0 at offset e (was 0, writing 28fc) PM: Writing back config space on device 0000:06:03.0 at offset d (was 0, writing 2800) PM: Writing back config space on device 0000:06:03.0 at offset c (was 0, writing 24fc) PM: Writing back config space on device 0000:06:03.0 at offset b (was 0, writing 2400) PM: Writing back config space on device 0000:06:03.0 at offset a (was 0, writing 3bfff000) PM: Writing back config space on device 0000:06:03.0 at offset 9 (was 0, writing 38000000) PM: Writing back config space on device 0000:06:03.0 at offset 8 (was 0, writing 37fff000) PM: Writing back config space on device 0000:06:03.0 at offset 7 (was 0, writing 34000000) PM: Writing back config space on device 0000:06:03.0 at offset 6 (was 0, writing b00a0706) PM: Writing back config space on device 0000:06:03.0 at offset 4 (was 0, writing b0103000) PM: Writing back config space on device 0000:06:03.0 at offset 3 (was 820000, writing 82a800) PM: Writing back config space on device 0000:06:03.0 at offset 1 (was 2100000, writing 2100007) PM: Writing back config space on device 0000:06:03.1 at offset 4 (was 0, writing b0100000) PM: Writing back config space on device 0000:06:03.1 at offset 3 (was 800000, writing 802000) PM: Writing back config space on device 0000:06:03.1 at offset 1 (was 2100000, writing 2100106) PM: Writing back config space on device 0000:06:03.2 at offset 4 (was 0, writing b0100800) PM: Writing back config space on device 0000:06:03.2 at offset 3 (was 800000, writing 802000) PM: Writing back config space on device 0000:06:03.2 at offset 1 (was 2100000, writing 2100106) ACPI: PCI Interrupt 0000:06:03.2[A] -> GSI 16 (level, low) -> IRQ 16 PM: Writing back config space on device 0000:06:03.3 at offset 4 (was 0, writing b0100c00) PM: Writing back config space on device 0000:06:03.3 at offset 1 (was 2100000, writing 2100102) PM: Writing back config space on device 0000:06:03.4 at offset 4 (was 0, writing b0101000) PM: Writing back config space on device 0000:06:03.4 at offset 1 (was 2100000, writing 2100102) PM: Writing back config space on device 0000:06:04.0 at offset 5 (was 0, writing b0101400) PM: Writing back config space on device 0000:06:04.0 at offset 4 (was 1, writing 2001) PM: Writing back config space on device 0000:06:04.0 at offset 3 (was 0, writing 2000) PM: Writing back config space on device 0000:06:04.0 at offset 1 (was 2900000, writing 2900107) eth0: link down wlan0: Coming out of suspend... PCI: Enabling device 0000:06:05.0 (0000 -> 0002) ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 18 (level, low) -> IRQ 19 PM: Writing back config space on device 0000:06:05.0 at offset f (was 18030100, writing 1803010b) PM: Writing back config space on device 0000:06:05.0 at offset 4 (was 0, writing b0102000) PM: Writing back config space on device 0000:06:05.0 at offset 3 (was 0, writing 2008) PM: Writing back config space on device 0000:06:05.0 at offset 1 (was 2900002, writing 2900116) i8042 kbd 00:07: activation failed i8042 aux 00:08: activation failed ata2: SATA link down (SStatus 0 SControl 0) ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 0) hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected Restarting tasks ... <6>usb 3-1: USB disconnect, address 2 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) done. usb 4-2: USB disconnect, address 2 ata1.00: configured for UDMA/33 usb 3-1: new full speed USB device using uhci_hcd and address 3 usb 3-1: configuration #1 chosen from 1 choice usb 4-2: new full speed USB device using uhci_hcd and address 3 usb 4-2: configuration #1 chosen from 1 choice tun0: Disabled Privacy Extensions ACPI: Battery Slot [CMB1] (battery present) ACPI: Battery Slot [CMB2] (battery absent) ** Loaded modules: Module Size Used by battery 8640 0 i915 22048 2 drm 74036 3 i915 rfcomm 36784 2 l2cap 22880 9 rfcomm tun 10976 1 ppdev 8804 0 parport_pc 33668 0 lp 11076 0 parport 34280 3 ppdev,parport_pc,lp acpi_cpufreq 9260 0 cpufreq_stats 5184 0 cpufreq_conservative 7560 0 cpufreq_powersave 1856 0 cpufreq_ondemand 8492 1 cpufreq_userspace 4260 0 freq_table 4512 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand ipv6 240772 30 nfs 228168 6 lockd 60744 2 nfs nfs_acl 3520 1 nfs sunrpc 170780 24 nfs,lockd,nfs_acl joydev 11360 0 pcmcia 37036 0 ipw2200 134568 0 ieee80211 31048 1 ipw2200 ieee80211_crypt 5888 1 ieee80211 sdhci 16836 0 firmware_class 9408 2 pcmcia,ipw2200 mmc_core 47300 1 sdhci yenta_socket 24844 1 rsrc_nonstatic 11872 1 yenta_socket pcmcia_core 36884 3 pcmcia,yenta_socket,rsrc_nonstatic rtc 13052 0 serio_raw 6660 0 pcspkr 3200 0 psmouse 36464 0 i2c_i801 9232 0 iTCO_wdt 11268 0 i2c_core 22432 1 i2c_i801 hci_usb 14780 2 bluetooth 53220 7 rfcomm,l2cap,hci_usb snd_hda_intel 275264 2 video 18672 0 output 3744 1 video snd_pcm_oss 38272 0 snd_mixer_oss 15296 2 snd_pcm_oss snd_pcm 71780 2 snd_hda_intel,snd_pcm_oss snd_timer 21092 1 snd_pcm ac 4544 0 button 8432 0 snd 48612 7 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer intel_agp 23412 1 soundcore 7552 2 snd agpgart 31688 3 drm,intel_agp snd_page_alloc 10056 2 snd_hda_intel,snd_pcm evdev 11104 6 ext3 122920 2 jbd 43732 1 ext3 mbcache 8288 1 ext3 sha256_generic 11040 0 aes_i586 33376 2 aes_generic 27776 0 geode_aes 6024 0 cbc 4416 1 blkcipher 6724 2 geode_aes,cbc dm_crypt 13220 1 dm_mirror 21600 0 dm_snapshot 16964 0 dm_mod 55812 10 dm_crypt,dm_mirror,dm_snapshot sg 33264 0 sr_mod 16708 0 cdrom 32512 1 sr_mod ide_disk 15648 3 ata_piix 17092 0 8139cp 21856 0 ata_generic 7428 0 ahci 26116 0 libata 144464 3 ata_piix,ata_generic,ahci scsi_mod 141196 3 sg,sr_mod,libata 8139too 25600 0 mii 5312 2 8139cp,8139too firewire_ohci 17760 0 firewire_core 39232 1 firewire_ohci crc_itu_t 2176 1 firewire_core generic 4388 0 [permanent] piix 7492 0 [permanent] ide_core 108292 3 ide_disk,generic,piix ehci_hcd 32524 0 uhci_hcd 23376 0 usbcore 132940 4 hci_usb,ehci_hcd,uhci_hcd thermal 16028 0 processor 36520 3 acpi_cpufreq,thermal fan 4772 0 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 04) Subsystem: Fujitsu Limited. Unknown device [10cf:12d7] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 04) (prog-if 00 [VGA controller]) Subsystem: Fujitsu Limited. Unknown device [10cf:12e2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at b0080000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at 1400 [size=8] Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at b0040000 (32-bit, non-prefetchable) [size=256K] Capabilities: <access denied> Kernel modules: intelfb 00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 04) Subsystem: Fujitsu Limited. Unknown device [10cf:12e2] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: Memory at 30000000 (32-bit, non-prefetchable) [disabled] [size=512K] Capabilities: <access denied> 00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [8086:2668] (rev 04) Subsystem: Fujitsu Limited. Unknown device [10cf:1326] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at b0000000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 04) (prog-if 00 [UHCI]) Subsystem: Fujitsu Limited. Unknown device [10cf:12e8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 17 Region 4: I/O ports at 1420 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 04) (prog-if 00 [UHCI]) Subsystem: Fujitsu Limited. Unknown device [10cf:12e8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 18 Region 4: I/O ports at 1440 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 04) (prog-if 00 [UHCI]) Subsystem: Fujitsu Limited. Unknown device [10cf:12e8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 19 Region 4: I/O ports at 1460 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 04) (prog-if 00 [UHCI]) Subsystem: Fujitsu Limited. Unknown device [10cf:12e8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at 1480 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 04) (prog-if 20 [EHCI]) Subsystem: Fujitsu Limited. Unknown device [10cf:12e9] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 17 Region 0: Memory at b0004000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d4) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=06, subordinate=0a, sec-latency=32 I/O behind bridge: 00002000-00002fff Memory behind bridge: b0100000-b01fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 04) Subsystem: Fujitsu Limited. Unknown device [10cf:12e4] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel modules: iTCO_wdt, intel-rng 00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller [8086:266f] (rev 04) (prog-if 8a [Master SecP PriP]) Subsystem: Fujitsu Limited. Unknown device [10cf:12e5] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 1410 [size=16] Kernel driver in use: PIIX_IDE Kernel modules: piix 00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA Controller [8086:2653] (rev 04) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Fujitsu Limited. Unknown device [10cf:12e6] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 18 Region 0: I/O ports at 14b8 [size=8] Region 1: I/O ports at 140c [size=4] Region 2: I/O ports at 14b0 [size=8] Region 3: I/O ports at 1408 [size=4] Region 4: I/O ports at 14a0 [size=16] Region 5: Memory at b0004400 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci, ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 04) Subsystem: Fujitsu Limited. Unknown device [10cf:12e7] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 18 Region 4: I/O ports at 14c0 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 06:03.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b3) Subsystem: Fujitsu Limited. Unknown device [10cf:1254] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168 Interrupt: pin A routed to IRQ 16 Region 0: Memory at b0103000 (32-bit, non-prefetchable) [size=4K] Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176 Memory window 0: 34000000-37fff000 (prefetchable) Memory window 1: 38000000-3bfff000 I/O window 0: 00002400-000024ff I/O window 1: 00002800-000028ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket 06:03.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] (rev 08) (prog-if 10 [OHCI]) Subsystem: Fujitsu Limited. Unknown device [10cf:1255] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min, 1000ns max) Interrupt: pin B routed to IRQ 20 Region 0: Memory at b0100000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci 06:03.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 17) Subsystem: Fujitsu Limited. Unknown device [10cf:1323] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 16 Region 0: Memory at b0100800 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci Kernel modules: sdhci 06:03.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 08) Subsystem: Fujitsu Limited. Unknown device [10cf:1257] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 255 Region 0: Memory at b0100c00 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> 06:03.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 03) Subsystem: Fujitsu Limited. Unknown device [10cf:1324] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 255 Region 0: Memory at b0101000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> 06:04.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) Subsystem: Fujitsu Limited. Unknown device [10cf:12ce] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 21 Region 0: I/O ports at 2000 [size=256] Region 1: Memory at b0101400 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: 8139too Kernel modules: 8139too, 8139cp 06:05.0 Network controller [0280]: Intel Corporation PRO/Wireless 2915ABG Network Connection [8086:4223] (rev 05) Subsystem: Intel Corporation Unknown device [8086:1030] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (750ns min, 6000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at b0102000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ipw2200 Kernel modules: ipw2200 -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.24-1-686 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.24-1-686 depends on: ii debconf [debconf-2.0] 1.5.19 Debian configuration management sy ii initramfs-tools [linux-initr 0.91d tools for generating an initramfs ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo Versions of packages linux-image-2.6.24-1-686 recommends: ii libc6-i686 2.7-6 GNU C Library: Shared libraries [i -- debconf information excluded -- see shy jo
Attachment:
signature.asc
Description: Digital signature