Bug#445615: linux-image-2.6.22-2-686: package broke my grub menu.lst file
Package: linux-image-2.6.22-2-686
Version: 2.6.22-4
Severity: grave
Justification: renders package unusable
I had a custom built kernel (2.6.20.10).
This was the conf in the menu.lst file:
title Debian GNU/Linux, kernel 2.6.20.10
root (hd0,1)
kernel /boot/vmlinuz-2.6.20.10 root=/dev/hda2 ro
savedefault
After installing the stock kernel (linux-image-2.6.22-2-686) this configuration was changed to:
title Debian GNU/Linux, kernel 2.6.20.10
root (hd0,2)
kernel /boot/vmlinuz-2.6.20.10 root=/dev/hda3 ro
savedefault
And of course the system could not boot since it is installed in the second partition (/dev/hda2).
The configuration which the stock kernel package generated for it self was also wrong (it pointed to /dev/hda3, instead of the correct /dev/hda2).
So, I had to manually edit /boot/grub/menu.lst in order to change all (hd0,2) back to (hd0,1) and all hda3 back to hda2.
I can't really guess why it thought that the system is installed on /dev/hda3...
-- Package-specific info:
** Version:
Linux version 2.6.22-2-686 (Debian 2.6.22-4) (waldi@debian.org) (gcc version 4.1.3 20070812 (prerelease) (Debian 4.1.2-15)) #1 SMP Fri Aug 31 00:24:01 UTC 2007
** Tainted: PFSRMB
** Kernel log:
nsc-ircc, Found chip at base=0x02e
nsc-ircc, Wrong chip version ff
nsc-ircc, Found chip at base=0x02e
nsc-ircc, Wrong chip version ff
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x02e
nsc-ircc, Wrong chip version ff
nsc-ircc, Found chip at base=0x02e
nsc-ircc, Wrong chip version ff
pnp: Device 00:08 disabled.
intel_rng: FWH not detected
Adding 586332k swap on /dev/hda5. Priority:-1 extents:1 across:586332k
EXT3 FS on hda2, internal journal
loop: module loaded
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
fuse init (API version 7.8)
NTFS driver 2.1.28 [Flags: R/W MODULE].
NTFS volume version 3.1.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ACPI: Battery Slot [BAT0] (battery present)
ACPI: AC Adapter [ADP0] (on-line)
input: Power Button (FF) as /class/input/input5
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input6
ACPI: Power Button (CM) [PWRB]
input: Lid Switch as /class/input/input7
ACPI: Lid Switch [LID0]
input: Sleep Button (CM) as /class/input/input8
ACPI: Sleep Button (CM) [SLPB]
vmmon: module license 'unspecified' taints kernel.
/dev/vmmon[3043]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[3043]: Module vmmon: initialized
/dev/vmnet: open called by PID 3076 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth2: peer interface eth2 not found, will wait for it to come up
bridge-eth2: attached
/dev/vmnet: open called by PID 3085 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 3086 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 3110 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
[fglrx] Maximum main memory to use for locked dma buffers: 929 MBytes.
[fglrx] USWC is disabled in module parameters
[fglrx] PAT is disabled!
[fglrx] module loaded - fglrx 8.40.4 [Jul 31 2007] on minor 0
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[fglrx] total GART = 130023424
[fglrx] free GART = 114032640
[fglrx] max single GART = 114032640
[fglrx] total LFB = 134086656
[fglrx] free LFB = 84529152
[fglrx] max single LFB = 84529152
[fglrx] total Inv = 134217728
[fglrx] free Inv = 134217728
[fglrx] max single Inv = 134217728
[fglrx] total TIM = 0
vmnet8: no IPv6 routers present
bridge-eth2: enabling the bridge
bridge-eth2: up
ieee80211_crypt: registered algorithm 'TKIP'
bridge-eth2: disabling the bridge
bridge-eth2: down
bridge-eth2: enabling the bridge
bridge-eth2: up
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
eth2: no IPv6 routers present
usb 4-1: new high speed USB device using ehci_hcd and address 4
usb 4-1: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 4:0:0:0: Direct-Access WDC WD32 00JB-00KFA0 0000 PQ: 0 ANSI: 0
sd 4:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 27 00 00 00
sd 4:0:0:0: [sda] Assuming drive cache: write through
sd 4:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 27 00 00 00
sd 4:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 4:0:0:0: [sda] Attached SCSI disk
/dev/vmnet: open called by PID 5276 (vmware-vmx)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmmon[5286]: host clock rate change request 0 -> 19
/dev/vmmon[5286]: host clock rate change request 19 -> 83
/dev/vmnet: open called by PID 5286 (vmware-vmx)
/dev/vmnet: port on hub 8 successfully opened
** Loaded modules:
Module Size Used by
sd_mod 27136 2
usb_storage 76608 1
tun 10560 0
michael_mic 2496 6
arc4 2016 6
ecb 3520 6
blkcipher 6244 1 ecb
ieee80211_crypt_tkip 10176 3
fglrx 729568 11
vmnet 34820 11
parport_pc 33796 0
parport 33960 1 parport_pc
vmmon 105004 6
button 7920 0
ac 5188 0
battery 9988 0
ipv6 236964 10
nls_utf8 2080 1
ntfs 203968 1
fuse 41908 5
dm_snapshot 16516 0
dm_mirror 20928 0
dm_mod 52160 2 dm_snapshot,dm_mirror
firewire_sbp2 12100 0
loop 16932 0
irtty_sir 8064 0
sir_dev 15396 1 irtty_sir
irda 172092 2 irtty_sir,sir_dev
i2c_i801 8656 0
pcmcia 37100 0
crc_ccitt 2144 1 irda
iTCO_wdt 9924 0
rtc 12856 0
psmouse 36016 0
serio_raw 6692 0
i2c_core 23552 1 i2c_i801
ipw2200 131396 0
snd_hda_intel 239160 2
ieee80211 31592 1 ipw2200
ieee80211_crypt 5792 2 ieee80211_crypt_tkip,ieee80211
snd_pcm_oss 39200 0
snd_mixer_oss 15424 2 snd_pcm_oss
firmware_class 9504 2 pcmcia,ipw2200
snd_pcm 72324 2 snd_hda_intel,snd_pcm_oss
snd_timer 21028 1 snd_pcm
yenta_socket 24844 2
rsrc_nonstatic 11968 1 yenta_socket
pcmcia_core 37108 3 pcmcia,yenta_socket,rsrc_nonstatic
snd 48324 7 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 7520 2 snd
sky2 40612 0
snd_page_alloc 9512 2 snd_hda_intel,snd_pcm
intel_agp 23188 0
agpgart 31912 2 fglrx,intel_agp
tsdev 7968 0
joydev 9568 0
evdev 9312 7
ext3 121224 2
jbd 55336 1 ext3
mbcache 8260 1 ext3
ide_disk 16512 5
ide_cd 36416 0
cdrom 32832 1 ide_cd
ata_piix 13348 0
ata_generic 7556 0
usbhid 25792 0
hid 25248 1 usbhid
ahci 21380 0
libata 115664 3 ata_piix,ata_generic,ahci
scsi_mod 136620 4 sd_mod,usb_storage,firewire_sbp2,libata
generic 4836 0 [permanent]
piix 8868 0 [permanent]
ide_core 113764 5 usb_storage,ide_disk,ide_cd,generic,piix
firewire_ohci 16512 0
firewire_core 38816 2 firewire_sbp2,firewire_ohci
crc_itu_t 2144 1 firewire_core
ehci_hcd 30796 0
uhci_hcd 22960 0
usbcore 125096 5 usb_storage,usbhid,ehci_hcd,uhci_hcd
thermal 13416 0
processor 31016 1 thermal
fan 4836 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 03)
Subsystem: CLEVO/KAPOK Computer Unknown device [1558:04a0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port [8086:2591] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: c0100000-c01fffff
Prefetchable memory behind bridge: d0000000-d7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [8086:2668] (rev 04)
Subsystem: CLEVO/KAPOK Computer Unknown device [1558:04a0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 23
Region 0: Memory at c0000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: c4000000-c7ffffff
Prefetchable memory behind bridge: 00000000d8000000-00000000dbffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 04) (prog-if 00 [UHCI])
Subsystem: CLEVO/KAPOK Computer Unknown device [1558:04a0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 1800 [size=32]
00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 04) (prog-if 00 [UHCI])
Subsystem: CLEVO/KAPOK Computer Unknown device [1558:04a0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 1820 [size=32]
00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 04) (prog-if 00 [UHCI])
Subsystem: CLEVO/KAPOK Computer Unknown device [1558:04a0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 1840 [size=32]
00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 04) (prog-if 20 [EHCI])
Subsystem: CLEVO/KAPOK Computer Unknown device [1558:04a0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at c0004000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d4) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=03, subordinate=0b, sec-latency=216
I/O behind bridge: 00004000-00004fff
Memory behind bridge: c8000000-c80fffff
Prefetchable memory behind bridge: 0000000050000000-0000000057ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 04)
Subsystem: CLEVO/KAPOK Computer Unknown device [1558:04a0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller [8086:266f] (rev 04) (prog-if 8a [Master SecP PriP])
Subsystem: CLEVO/KAPOK Computer Unknown device [1558:04a0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1860 [size=16]
00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA Controller [8086:2653] (rev 04) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: CLEVO/KAPOK Computer Unknown device [1558:04a0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 0: I/O ports at 18a0 [size=8]
Region 1: I/O ports at 1898 [size=4]
Region 2: I/O ports at 1890 [size=8]
Region 3: I/O ports at 1874 [size=4]
Region 4: I/O ports at 1880 [size=16]
Region 5: Memory at c0004400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 04)
Subsystem: CLEVO/KAPOK Computer Unknown device [1558:04a0]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 18c0 [size=32]
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon Mobility X700 (PCIE) [1002:5653] (prog-if 00 [VGA])
Subsystem: CLEVO/KAPOK Computer Unknown device [1558:04a0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=128M]
Region 2: Memory at c0100000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at 2000 [size=256]
[virtual] Expansion ROM at c0120000 [disabled] [size=128K]
Capabilities: <access denied>
02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller [11ab:4362] (rev 15)
Subsystem: CLEVO/KAPOK Computer Marvell 88E8053 Gigabit Ethernet Controller (Clevo) [1558:04a0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 221
Region 0: Memory at c4000000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at 3000 [size=256]
[virtual] Expansion ROM at d8000000 [disabled] [size=128K]
Capabilities: <access denied>
03:02.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) [104c:8026] (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at c8004000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at c8000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
03:03.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG Network Connection [8086:4220] (rev 05)
Subsystem: Intel Corporation Unknown device [8086:2702]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (750ns min, 6000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 23
Region 0: Memory at c8005000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
03:04.0 CardBus bridge [0607]: Texas Instruments PCI1620 PC Card Controller [104c:ac54] (rev 01)
Subsystem: CLEVO/KAPOK Computer Unknown device [1558:04a0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at c8006000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=03, secondary=04, subordinate=07, sec-latency=176
Memory window 0: 50000000-53fff000 (prefetchable)
Memory window 1: 58000000-5bfff000
I/O window 0: 00004400-000044ff
I/O window 1: 00004800-000048ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
03:04.1 CardBus bridge [0607]: Texas Instruments PCI1620 PC Card Controller [104c:ac54] (rev 01)
Subsystem: CLEVO/KAPOK Computer Unknown device [1558:04a0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at c8007000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=03, secondary=08, subordinate=0b, sec-latency=176
Memory window 0: 54000000-57fff000 (prefetchable)
Memory window 1: 5c000000-5ffff000
I/O window 0: 00004c00-00004cff
I/O window 1: 00001400-000014ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
03:04.2 System peripheral [0880]: Texas Instruments PCI1620 Firmware Loading Function [104c:8201] (rev 01)
Subsystem: CLEVO/KAPOK Computer Unknown device [1558:04a0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 57 (1750ns min, 1000ns max), Cache Line Size: 32 bytes
Region 0: I/O ports at 4000 [size=64]
Capabilities: <access denied>
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.22-2-686 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.22-2-686 depends on:
ii initramfs-tools [linux-initr 0.90a tools for generating an initramfs
ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.22-2-686 recommends:
ii libc6-i686 2.6.1-1+b1 GNU C Library: Shared libraries [i
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.22-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.22-2-686/prerm/would-invalidate-boot-loader-2.6.22-2-686: true
linux-image-2.6.22-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.22-2-686/preinst/elilo-initrd-2.6.22-2-686: true
linux-image-2.6.22-2-686/preinst/abort-overwrite-2.6.22-2-686:
linux-image-2.6.22-2-686/postinst/old-dir-initrd-link-2.6.22-2-686: true
linux-image-2.6.22-2-686/prerm/removing-running-kernel-2.6.22-2-686: true
linux-image-2.6.22-2-686/preinst/lilo-initrd-2.6.22-2-686: true
linux-image-2.6.22-2-686/postinst/depmod-error-initrd-2.6.22-2-686: false
linux-image-2.6.22-2-686/preinst/overwriting-modules-2.6.22-2-686: true
linux-image-2.6.22-2-686/preinst/initrd-2.6.22-2-686:
linux-image-2.6.22-2-686/postinst/depmod-error-2.6.22-2-686: false
linux-image-2.6.22-2-686/preinst/already-running-this-2.6.22-2-686:
linux-image-2.6.22-2-686/postinst/old-initrd-link-2.6.22-2-686: true
linux-image-2.6.22-2-686/postinst/bootloader-test-error-2.6.22-2-686:
linux-image-2.6.22-2-686/preinst/failed-to-move-modules-2.6.22-2-686:
linux-image-2.6.22-2-686/preinst/bootloader-initrd-2.6.22-2-686: true
linux-image-2.6.22-2-686/preinst/abort-install-2.6.22-2-686:
linux-image-2.6.22-2-686/postinst/create-kimage-link-2.6.22-2-686: true
linux-image-2.6.22-2-686/postinst/bootloader-error-2.6.22-2-686:
linux-image-2.6.22-2-686/postinst/old-system-map-link-2.6.22-2-686: true
Reply to: