Re: Va bene i nomi strani alle interfacce, ma...

[Piviul <piviul@riminilug.it>]

Marco Gaiarin ha scritto il 11/02/20 alle 09:28:
> Serverino proxmox6 (debian buster, kernel 5.3.18-1-pve); la scheda di rete
> integrata viene decentemente vista e rinominata:
> [...]
> Cioè, il problema è che ritiene che entrambe debbano chiamarsi 'ens1',
> quindi la seconda la chiama 'rename3'?
Giusto così con lo stesso kernel questo è il risultato sulk mio proxmox:
> root@pve01:~# grep tg3 /var/log/kern.log
> Feb 13 12:17:41 pve01 kernel: [    4.825040] tg3.c:v3.137 (May 11, 2014)
> Feb 13 12:17:41 pve01 kernel: [    4.847564] tg3 0000:03:00.0 eth0: Tigon3 [partno(629133-002) rev 5719001] (PCI Express) MAC address 2c:44:fd:94:fb:10
> Feb 13 12:17:41 pve01 kernel: [    4.847568] tg3 0000:03:00.0 eth0: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
> Feb 13 12:17:41 pve01 kernel: [    4.847570] tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
> Feb 13 12:17:41 pve01 kernel: [    4.847572] tg3 0000:03:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
> Feb 13 12:17:41 pve01 kernel: [    4.864620] tg3 0000:03:00.1 eth1: Tigon3 [partno(629133-002) rev 5719001] (PCI Express) MAC address 2c:44:fd:94:fb:11
> Feb 13 12:17:41 pve01 kernel: [    4.864628] tg3 0000:03:00.1 eth1: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
> Feb 13 12:17:41 pve01 kernel: [    4.864635] tg3 0000:03:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
> Feb 13 12:17:41 pve01 kernel: [    4.864640] tg3 0000:03:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit]
> Feb 13 12:17:41 pve01 kernel: [    4.888104] tg3 0000:03:00.2 eth2: Tigon3 [partno(629133-002) rev 5719001] (PCI Express) MAC address 2c:44:fd:94:fb:12
> Feb 13 12:17:41 pve01 kernel: [    4.888111] tg3 0000:03:00.2 eth2: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
> Feb 13 12:17:41 pve01 kernel: [    4.888117] tg3 0000:03:00.2 eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
> Feb 13 12:17:41 pve01 kernel: [    4.888122] tg3 0000:03:00.2 eth2: dma_rwctrl[00000001] dma_mask[64-bit]
> Feb 13 12:17:41 pve01 kernel: [    4.912652] tg3 0000:03:00.3 eth3: Tigon3 [partno(629133-002) rev 5719001] (PCI Express) MAC address 2c:44:fd:94:fb:13
> Feb 13 12:17:41 pve01 kernel: [    4.912657] tg3 0000:03:00.3 eth3: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
> Feb 13 12:17:41 pve01 kernel: [    4.912661] tg3 0000:03:00.3 eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
> Feb 13 12:17:41 pve01 kernel: [    4.912664] tg3 0000:03:00.3 eth3: dma_rwctrl[00000001] dma_mask[64-bit]
> Feb 13 12:17:41 pve01 kernel: [    4.952495] tg3 0000:03:00.0 eno1: renamed from eth0
> Feb 13 12:17:41 pve01 kernel: [    4.976913] tg3 0000:03:00.1 eno2: renamed from eth1
> Feb 13 12:17:41 pve01 kernel: [    5.004928] tg3 0000:03:00.3 eno4: renamed from eth3
> Feb 13 12:17:41 pve01 kernel: [    5.036692] tg3 0000:03:00.2 eno3: renamed from eth2
> Feb 13 12:17:45 pve01 kernel: [   12.419584] tg3 0000:03:00.0 eno1: Link is up at 1000 Mbps, full duplex
> Feb 13 12:17:45 pve01 kernel: [   12.419597] tg3 0000:03:00.0 eno1: Flow control is on for TX and on for RX
> Feb 13 12:17:45 pve01 kernel: [   12.419599] tg3 0000:03:00.0 eno1: EEE is disabled

Come vedi la prima è eth0, la seconda eth1 e così via... anche se non si 
capisce perché il kernel di proxmox prima debba dargli un vecchio nome 
eth per poi convertirlo in en... non è che hai messo qualche regola udev 
che ti fa casino?

Piviul