Re: cdrecord
>>>>> "seb" == seb <sebastien@ekinos.com> writes:
seb> Bonjour,
Salut,
seb> Quelqu'un connaitrait il la commande a utiliser avec cdrecord pour
seb> graver une image iso sur un cdrom, et qu'ensuite cette image soit
seb> bootable pour faire une install directement dessus ?
Je ne suis pas sûr si tu disposes déjà de l'image ISO ou si par contre tu
souhaites la construire.
Dans le premier cas, il suffit de graver de façon classique
cdrecord -data nom_image_iso dev=...
par ailleurs en -data est l'option par défaut en l'absence de toute autre
option.
Dans le deuxième cas c'est mkisofs (par exemple) qui te permettra de
construire une image ISO bootable ; c'est le format «El Torito», un extrait
de la page du manuel de mkisofs
-b eltorito_boot_image
Specifies the path and filename of the boot image to be used when
making an "El Torito" bootable CD. The pathname must be
relative to the source path specified to mkisofs. This option
is required to make an "El Torito" bootable CD. The boot image
must be exactly the size of either a 1.2, 1.44, or a 2.88 meg
floppy, and mkisofs will use this size when creating the
output iso9660 filesystem. It is assumed that the first 512
byte sector should be read from the boot image (it is
essentially emulat ing a normal floppy drive). This will
work, for example, if the boot image is a LILO based boot
floppy.
-c boot_catalog
Specifies the path and filename of the boot catalog
to be used when making an "El Torito" bootable CD.
The pathname must be relative to the source path
specified to mkisofs. This option is required to
make a bootable CD. This file will be inserted
into the output tree and not created in the source
filesystem, so be sure the specified filename does
not conflict with an existing file, as it will be
excluded. Usually a name like "boot.catalog" is
chosen.
Ainsi si tu as dans un répertoire toto contenant l'arboresence que tu
désires graver, ainsi que par exemple boot/boot.img l'image que tu veux
utiliser pour booter ; il suffira de faire, par exemple,
mkisofs -l -J -v -b boot/boot.img -c boot/boot.catalog -o image.raw .
cdrecord image.raw dev=(les bons paramètres correspondants à ton
graveur)
seb> Merci d'avance
De rien et j'espère que ceci t'aidera à avancer.
Cordialement,
Hedi.
P.S. Cf. /usr/share/doc/mkisofs/README.eltorito pour plus de détails.
--
Hedi Berriche
mailto:hedi.berriche@btinternet.com
This is Linux Country.
In a quiet night,
you can hear Windows
reboot.
Reply to:
- References:
- cdrecord
- From: seb <sebastien@ekinos.com>