rescue: f6.txt 場苺
Bear with me...
%%%%%%%%%% 翻譯
0f特定的啟動參數 - 各種磁盤控制器07
您可以在提示符0fboot:07後使用以下啟動參數,可同啟動方式(參見<09F307>)一起使用。
0f硬件 指定參數07
Adaptec 151x, 152x 0faha152x=0biobase07[0f,0birq07[0f,0bscsi-id07[0f,0breconnect07]]]
Adaptec 1542 0faha1542=0biobase07[0f,0bbuson0f,0bbusoff07[0f,0bdmaspeed07]]
Adaptec 274x, 284x 0faic7xxx=no_reset07 (如果為非零'non-zero'則激活)
ATAPI/IDE CD-ROM 0fhd07{0fa07,0fb07,0fc07,0fd07}0f=cdrom07 (通常不需要)
BusLogic SCSI Hosts 0fbuslogic=0biobase07
某些DELL機型 0faic7xxx=no_probe07
Future Domain TMC-8xx/950 0ftmc8xx=0bmem_base0f,0birq07
基于NCR的SCSI控制器 0fsym53c8xx=safe:y07
Pro Audio Spectrum 0fpas16=0biobase0f,0birq07
PS/2 ESDI (MCA) 0fed=0bcyl0f,0bhead0f,0bsec07
希捷ST-0x 0fst0x=0bmem_base0f,0birq07
Trantor T128 0ft128=0bmem_base0f,0birq07
如果您的系統在啟動時掛起,而且您看到的最後提示信息為"aec671x-detect.."時,
請試試0fgdth=disable:y07看看。
請按<09回車鍵07>或者輸入啟動方式,參數,然後按<09回車鍵07>啟動。
請按功能鍵 <09F107> 查閱幫助索引頁面。
%%%%%%%%%%%%%%%
0fSPECIAL BOOT ARGUMENTS - VARIOUS DISK DRIVES07
You can use the following boot arguments at the 0fboot:07 prompt,
in combination with the boot method (see <09F307>).
0fHARDWARE PARAMETER TO SPECIFY07
Adaptec 151x, 152x 0faha152x=0biobase07[0f,0birq07[0f,0bscsi-id07[0f,0breconnect07]]]
Adaptec 1542 0faha1542=0biobase07[0f,0bbuson0f,0bbusoff07[0f,0bdmaspeed07]]
Adaptec 274x, 284x 0faic7xxx=no_reset07 (enabled if non-zero)
ATAPI/IDE CD-ROM 0fhd07{0fa07,0fb07,0fc07,0fd07}0f=cdrom07 (usually unnecessary)
BusLogic SCSI Hosts 0fbuslogic=0biobase07
Certain DELL machines 0faic7xxx=no_probe07
Future Domain TMC-8xx/950 0ftmc8xx=0bmem_base0f,0birq07
NCR-based SCSI controller 0fsym53c8xx=safe:y07
Pro Audio Spectrum 0fpas16=0biobase0f,0birq07
PS/2 ESDI (MCA) 0fed=0bcyl0f,0bhead0f,0bsec07
Seagate ST-0x 0fst0x=0bmem_base0f,0birq07
Trantor T128 0ft128=0bmem_base0f,0birq07
If your system hangs when booting, and the last message you see is
"aec671x-detect..", try 0fgdth=disable:y07
Press <09ENTER07> or type boot method, arguments, and <09ENTER07> to boot.
Press function key <09F107> for the help index.
%%%%%%%%%%%%%
--
Best regard
hashao
--
To UNSUBSCRIBE, email to debian-chinese-gb-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
--
| This message was re-posted from debian-chinese-gb@lists.debian.org
| and converted from gb2312 to big5 by an automatic gateway.
Reply to: