Re: Information needed from owners/users of Debian on ARM/kirkwood base QNAP devices (should take < 1min to gather)
Ian Campbell <ijc <at> hellion.org.uk> writes:
> TL;DR: Please run the attached kirkwood-qnap script on your ARM based
> QNAP systems as "./kirkwood-qnap --info" and report the results in this
> thread along with the model/kind of your QNAP device (as precisely as
> you can).
$ ./kirkwood-info.sh
.: 87: Can't open /usr/share/flash-kernel/functions
:-)
This is a TS-119 (the nice fanless model with an extruded aluminium chassis)
running a rather old Debian installation, hence the error above. Maybe the
following will tell you what you need to know:
phil@uganda:~$ uname -a
Linux uganda 2.6.33.2 #1 Tue Apr 20 18:50:54 BST 2010 armv5tel GNU/Linux
phil@uganda:~$ lspci
00:00.0 Memory controller: Marvell Technology Group Ltd. 88F6281 [Kirkwood]
ARM SoC (rev 02)
phil@uganda:~$ lspci -n
00:00.0 0580: 11ab:6281 (rev 02)
phil@uganda:~$ cat /proc/cpuinfo
Processor : Feroceon 88FR131 rev 1 (v5l)
BogoMIPS : 1199.30
Features : swp half thumb fastmult edsp
CPU implementer : 0x56
CPU architecture: 5TE
CPU variant : 0x2
CPU part : 0x131
CPU revision : 1
Hardware : QNAP TS-119/TS-219
Revision : 0000
Serial : 0000000000000000
phil@uganda:~$ ls /sys/bus/mdio_bus/devices/
0:08
Reply to: