bug in cdrecord-2.01.01a03
Hi!
On NetBSD-3.99.15/i386, with cdrtools-2.01.01a03, writing
an ordinary FUJI 1-4x CD-RW broke. The same command line,
drive, and medium works with cdrtools-2.01.
The message is
cdrecord: Trying to use ultra high speed+ medium on a writer which is not
compatible with ultra high speed+ media.
The medium I'm using definitely is not an ultra high speed one.
>From the Changelog, it seems that
- Added support for Ultra speed+ CD-RW media recognition and a check
whether the drive supports Ultra speed+ CD-RW media.
(Thanks to Alexander Noé).
might be related to this.
I'm using the NetBSD pkgsrc patches, available at
http://cvsweb.netbsd.org/bsdweb.cgi/pkgsrc/sysutils/cdrecord/patches/
I don't think this is related to this problem.
Command line:
cdrecord -v -dao dev=/dev/rcd0d driveropts=burnfree my.iso
Output from cdrtools-2.01.01:
Cdrecord-Clone 2.01 (i386-unknown-netbsd3.99.15) Copyright (C) 1995-2004 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '/dev/rcd0d'
devname: '/dev/rcd0d'
scsibus: -2 target: -2 lun: -2
Using libscg version 'schily-0.8'.
cdrecord: Warning: using inofficial libscg transport code version (frueauf-scsi-bsd.c-1.42nb1 '@(#)scsi-bsd.c 1.42 04/01/15 Copyright 1997 J. Schilling').
Driveropts: 'burnfree'
SCSI buffer size: 61440
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4040B'
Revision : 'A300'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A
Profile: 0x0012
Profile: 0x0011
Profile: 0x0014
Profile: 0x0013
Profile: 0x001A
Profile: 0x001B
Profile: 0x0010
Profile: 0x0009
Profile: 0x000A (current)
Profile: 0x0008
Profile: 0x0002
cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD.
cdrecord: Free test versions and free keys for personal use are at ftp://ftp.berlios.de/pub/cdrecord/ProDVD/
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1204224 = 1176 KB
Drive DMA Speed: 11273 kB/s 64x CD 8x DVD
FIFO size : 4194304 = 4096 KB
Track 01: data 12 MB
Total size: 13 MB (01:22.46) = 6185 sectors
Lout start: 14 MB (01:24/35) = 6185 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Reference speed: 2
Is not unrestricted
Is erasable
ATIP start of lead in: -11615 (97:27/10)
ATIP start of lead out: 335925 (74:41/00)
1T speed low: 0 (reserved val 0) 1T speed high: 4
2T speed low: 0 (reserved val 5) 2T speed high: 0 (reserved val 12)
power mult factor: 4 5
recommended erase/write power: 3
A1 values: 02 4A B0
A2 values: 5C C6 26
Disk type: Phase change
Manuf. index: 18
Manufacturer: Plasmon Data systems Ltd.
Blocks total: 335925 Blocks current: 335925 Blocks remaining: 329740
Starting to write CD/DVD at speed 4 in real SAO mode for single session.
Last chance to quit, starting real write 7 seconds.^C
Writing time: 5.987s
cdrecord: fifo had 68 puts and 0 gets.
cdrecord: fifo was 0 times empty and 1 times full, min fill was 0%.
Output from 2.01.01a03:
Cdrecord-Clone 2.01.01a03 (i386-unknown-netbsd3.99.15) Copyright (C) 1995-2005 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '/dev/rcd0d'
devname: '/dev/rcd0d'
scsibus: -2 target: -2 lun: -2
Using libscg version 'schily-0.8'.
cdrecord: Warning: using inofficial libscg transport code version (frueauf-scsi-bsd.c-1.42nb1 '@(#)scsi-bsd.c 1.42 04/01/15 Copyright 1997 J. Schilling').
Driveropts: 'burnfree'
SCSI buffer size: 61440
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4040B'
Revision : 'A300'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A
Profile: 0x0012
Profile: 0x0011
Profile: 0x0014
Profile: 0x0013
Profile: 0x001A
Profile: 0x001B
Profile: 0x0010
Profile: 0x0009
Profile: 0x000A (current)
Profile: 0x0008
Profile: 0x0002
cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD.
cdrecord: Free test versions and free keys for personal use are at ftp://ftp.berlios.de/pub/cdrecord/ProDVD/
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1204224 = 1176 KB
Drive DMA Speed: 11335 kB/s 64x CD 8x DVD
FIFO size : 4194304 = 4096 KB
Track 01: data 12 MB
Total size: 13 MB (01:22.46) = 6185 sectors
Lout start: 14 MB (01:24/35) = 6185 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Reference speed: 2
Is not unrestricted
Is erasable
ATIP start of lead in: -11615 (97:27/10)
ATIP start of lead out: 335925 (74:41/00)
1T speed low: 0 (reserved val 0) 1T speed high: 4
2T speed low: 0 (reserved val 5) 2T speed high: 0 (reserved val 12)
power mult factor: 4 5
recommended erase/write power: 3
A1 values: 02 4A B0
A2 values: 5C C6 26
Disk type: Phase change
Manuf. index: 18
Manufacturer: Plasmon Data systems Ltd.
Blocks total: 335925 Blocks current: 335925 Blocks remaining: 329740
cdrecord: Trying to use ultra high speed+ medium on a writer which is not
compatible with ultra high speed+ media.
Writing time: 3.096s
cdrecord: fifo had 68 puts and 0 gets.
cdrecord: fifo was 0 times empty and 1 times full, min fill was 0%.
Cheers,
Thomas
Reply to: